Desander

Environmental machinery
Desander rmt250
Desander rmt200
Desander rmt150
Desander rmt100a
Desander rmt500
Application:
Rmt,eries desander is mainly used in modern foundation construction. Such as wall stabilizing, drilling and any other construction using. It has several advantages:
1reuse of the slurry, thus save the material of making slurry, reduce the cost.
2decease the environment pollution as the design of the desanderby closed cycle and lower water content in the waste.
3improve the efficiency of drilling hole.
4enhance the quality of hole by full purification of the sewage.
Main feature
1the vibrating sc reen is easy to ope rate, install and maintain.
2advanced straight type make good effect of dewatering.
3efficiency of the vibrating screen is high, can be applied to drilling in varies geologies.
4voice of the vibrating screen is very low, good for the environment.??
5energy saving due to high power and low power consumption.
6the vibrating force, screen angle and screen size are adjustable.
7special recoil device can stop the block in the slurry tank, so can make sure to normal operation of the desander.
8advanced structure of corrosion resistance slurry pump can be standard used and maintain easily, thick grinding parts and bracket is suitable to transport.
9the hydrocyclone of the desanderis in good performance of separating. At the same time, the material is abrasion and corrosion resistance, so it can work in bad condition for long time without maintenance.
10our innovate liquid balance device can not only keep the stability of the storage tank level, but also can realize the recycling use of the slurry.

Oilfield Drilling Equipment Oilfield Solids Control Equipment

PRODUCT� DESCRIPTION
the second equipment in solids control system it is used to separate solid phase particles whose diameter is 40 75 m.
Select Special wear-resistant polyurethane material hydrocyclones.
Inlet tangential feeding,smooth transition ,which help to improve separation efficiency and have a wide range of separation sizes.
Symmetrical feeding design can make the liquid distribution to be more reasonable and stable.
Size of the underflow hole of the hydrocyclone can be adjusted in order to control the handling capacity of the equipment.
Different specifications and quantities of hydrocyclones can be matched according to the handling capacity that customer required.

The desander with underflow shaker is also called mini desander cleaner which is applicable for both weighted and unweighted drilling mud, while traditional desander no underflow vibrating screen only for unweighted drilling fluids. And comparing with large size desander and desilter assembly, the mini desander is cost-effective. For compact mud system used in HDD, CBM, water well drilling and mining project, mini desilter is an ideal choice.

Features:

(1). Desilter options with shaker and without shaker for flexible application.

(2). Desilter cones with PU material with better abrasion resistance.

(3). No under shaker design structure compact and assembly flexible.

(4). Mini desilter cleaner with shaker for both weighted / unweighted mud in various drilling.

The basic principle of the hydrocyclone is to separate the two-phase or multi-phase mixture of liquid-liquid, liquid-solid, liquid-gas and so on with a certain density difference under the action of centrifugal force. The mixed liquid is tangentially flowed into the cyclone with a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity. The high density components in the mixture under the action of the swirling flow at the same time along the axial downward movement along the radial outward movement in the reach of the cone down along the wall along the wall, and from the bottom outlet, thus forming The small vortex component moves toward the central axis and forms an upwardly moving internal vortex in the center of the axis, and then is discharged from the overflow port, thus achieving the purpose of two-phase separation.

Polyurethane characteristics:

1. The hardness range is wide, and the elongation and elasticity of the rubber are still under high hardness. The hardness range of polyurethane board is Shao A10-D80.

2. High strength. In rubber hardness under their tensile strength, tear strength and bearing capacity rubber is much higher than general. Under the high hardness the impact strength and flexural strength and is much higher than that of plastic.

3. Wear resistance. The wear resistance is very good, about 3-5 times of the rubber.

4. Oil resistance. Polyurethane board is a strong polar polymer, and the affinity of non polar mineral oil, in fuel oil and mechanical oil is almost no corrosion.

5. Good resistance to oxygen and ozone.

6. Excellent absorption performance, can be used to reduce the vibration, buffer effect. In the mold manufacturing industry, alternative rubber and spring.

7. It has good low temperature performance.

8. Radiation resistance, high energy - ray properties of the polyurethane, the use of the 10-10 radiation dose is still satisfactory.

9. Have good mechanical processing performance. (car, milling, grinding, drilling can be)

Application: widely used in machinery, transportation, oil, mining, construction, textile, sports and other fields.

The company to undertake a variety of specifications of the size of polyurethane products custom processing.

CSQ Desander separator is 2nd phase mud process equipment in solids control system.
The cones size and number can be adjusted according to client's actual capacity requirements.
Cones also can be cast iron or other materials. The bottom shaker can be configured or not.
We also can design desander with large bottom shale shaker, such as AJS703L, AJS603L etc.CSQ seriesHydrocyclone desander is 2nd solids control equipment.
OGEM desander is widely used in oil and gas drilling, HDD, slurry separation, etc. Industry
Benefits
Provide better effect for subsequent process
Provides durable and low cost replacement
Save much space and provide easy handling
More flexible, user-friendly and proper cost
Better to protect equipment when handle and transport

Mud Cleaner or Desander and Desilter is the second class and the third phase solids control equipment, and combine desander cleaner, desilter cleaner and underset shale shaker as one complete equipment, compressed structure, small size and powerful function, it is the ideal choice of second and third phase solids control equipments.Mud Cleaner is also called Desander and Desilter.

Brightway Solids is the professional Mud Cleaner or Desander and Desilter manufacturer and supplier in China and can design and product BWNJ series Mud Cleaner as clients request.

Brightway Solids Mud Cleaner Model

BWZJ104-2S12N Mud Cleaner Capacity: 240m3/h1056GPM)
BWZJ103-2S12N Mud Cleaner Capacity: 240m3/h1056GPM)
BWZJ70-2S12N Mud Cleaner Capacity: 240m3/h1056GPM)
BWZJ85-2S12N Mud Cleaner Capacity: 240m3/h1056GPM)

Mud Cleaner Features

1. Adopt ANSNY limited elment analysis, optimize structure.
2. Heat treatment on complete deck, grinding sand, pickling phosphating and hot dip galvanizing
3. Adopt SS304 or Q345 high-strength alloy material.
4. Vibration motor is form Italy OLI.
5. Electrinic control system if from Huarong brand or Helong brand explosion-proof elctronic switch.
6. High strength compound rubber material used to reduce shock
7. Cone adopt high wearing-resisting polyurethane and High copy Derrick structure
8. Inlet and outlet adopt fast joint connection






Plastic Package,Wooden Box, or according to the customer request.

Model: shale shaker QZS703
Vibration force: 76kn
Capacity(m3/h, gpm):90/396
Screen meshes:40-200meshes.


Weight:1960kgs
Dimension:2580x1840x1640mm.