Pp Inspection Chambers

B.O.D. Incubator is the most versatile low temperature indicator for biochemical oxygen demand determination .Castor wheel mounted cabinet is double walled with inner chamber of stainless steel and outer casing of m.S. Sheet duly painted. The gap of 75mm between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses. Tripple walled back of the unit is fitted with two air circulation fans for maintaining the temperature uniformally throughout the chamber. Heating elements of nicrome wire are placed in the air path and are duly insulated from the body. The inner chamber is ribbed for placement of shelves at desired heights. Full view inner glass door permites inspection of specimens, without disturbing the same. Lock and key arrangement is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. The temperature range from 5ºc to 50ºc is controlled by digital temperature controller cum indicator. Refrigeration unit is formed by hermetically sealed isi marked shriram make compressor and the cooling coil are distributed all round the chamber and lie in the air circulation path. Panel consist of seperate indicator lamps for mains, heating and incoming voltage. Supplied complete with 2/3 shelves, cord and plug to work on 220/230v a.C. Supply.
Available sizes:-
Inside chamber (wxhxd)CapacityLtr.
455mm x 610mm x 410mm4 cu.Ft.112
505mm x 830mm x 415mm6 cu.Ft.170
570mm x 875mm x 550mm10 cu.Ft280
650mm x 900mm x 580mm12 cu.Ft336
700mm x 900mm x 650mm15 cu.Ft420

Gross volume - 16 l
working volume 9 ltrs
capacity : 5 kgs
motor & control panel - non flame proof additional cost for providing flame proof motor
specification:
design: mono block cgmp model,
contact parts : ss316
other parts : ss304
product container:
made out of s316, 2 mm having a dutch mesh in ss316, 2 mm support plate, sight glass, and quick removable type clamps for the dutch mesh and support plate.
Trolley:
made out of ss304 pipe, 20 nb schedule 10 with 4 nos swivel pu wheels
air handling unit consists of inlet filters assemblies housed in a ss304 enclosure to be
placed either in the technical. Corridor or on the service floor. It shall have a 5 micron pre filters.
Heaters : steam heater assembly or electrically heated model 3 kw electrical load. (hepa filteration provided as optional)
filter bag:
the machine shall have a 20 micron finger bag made out of pc stain or pp cloth in the filter bag housing chamber, damper manual inlet & outlet dampers blower casing & motor 1.5 hp 2880 rpm motor non flp centrifugal type blower @250 m3hr earthing : standard earthing device (intrincically safe earthing provided as optional)
bursting disc:
a specially designed bursting disc is provided as a safety against any pressure built up in the main shell. Inlet & outlet ducting if required can be provided at extra cost.
Control panel:
control panel made in ss304 will be supplied loose or fitted on the machine. The main control panel housing the main contractors, over load relays, mcb's , inlet outlet temperature indicators, process timer and various operating push buttons & lamps
finish inside welds ground flush and surfaces shall have mirror polish.
External welds ground smooth and surfaces shall have matt finish.

Gross volume - 16 l
working volume 9 ltrs
capacity : 5 kgs
motor & control panel - non flame proof additional cost for providing flame proof motor
specification:
design: mono block cgmp model,
contact parts : ss316
other parts : ss304
product container:
made out of s316, 2 mm having a dutch mesh in ss316, 2 mm support plate, sight glass, and quick removable type clamps for the dutch mesh and support plate.
Trolley:
made out of ss304 pipe, 20 nb schedule 10 with 4 nos swivel pu wheels
air handling unit consists of inlet filters assemblies housed in a ss304 enclosure to be
placed either in the technical. Corridor or on the service floor. It shall have a 5 micron pre filters.
Heaters : steam heater assembly or electrically heated model 3 kw electrical load. (hepa filteration provided as optional)
filter bag:
the machine shall have a 20 micron finger bag made out of pc stain or pp cloth in the filter bag housing chamber, damper manual inlet & outlet dampers blower casing & motor 1.5 hp 2880 rpm motor non flp centrifugal type blower @250 m3hr earthing : standard earthing device (intrincically safe earthing provided as optional)
bursting disc:
a specially designed bursting disc is provided as a safety against any pressure built up in the main shell. Inlet & outlet ducting if required can be provided at extra cost.
Control panel:
control panel made in ss304 will be supplied loose or fitted on the machine. The main control panel housing the main contractors, over load relays, mcb's , inlet outlet temperature indicators, process timer and various operating push buttons & lamps
finish � inside welds ground flush and surfaces shall have mirror polish.
External welds ground smooth and surfaces shall have matt finish.

HAST PCT high-low temperature test chamber with pressure high pressure accelerated aging testing chamber factory�High Accelerated Stress Test
Steam Aging Test Chamber
Ozone Aging Chamber
Chamber/HAST Chamber
It test the resistance to pressure and air tightness for circuit board, multi-layer circuit board, IC, LCD and magnet iron. This machine is one of the common machine in aging equipment, used to test various types of materials for their performance under the condition of high temperature and high pressure. Application: Quality inspection for all types of electronic products, electric appliance, and products from communication, instrument, metal, plastic, automobile, food, chemical, building materials, medical and aerospace industries.
Pressure Accelerated Aging Test Chamber (HAST)
Safety�Device high pressure accelerated aging testing chamber factory:��
�1.�Safety�device�for�the�pot:�If�the�inner�box�is�not�closed�,�the�machine�can�not�start
�2.�Safety�Valve:�When�the�inner�box's�pressure�higher�than�the�machine's�undertake�value,�it�will�self-relieve.
�3.�Double�overheat�protection�device:�When�inner�box's�temperature�is�too�high,�it�will�alar m,�and�Automatic�cut�off�
the�heating�power.
4.�Cover�protection:�The�inner�box's�cover�is�made�of�aluminum�alloy,�can�protect�the�worker�from�scald.

Three Zone Thermal Shock Test chamber
Thermal Shock Test Chamber
Liquid Thermal Shock Test Chamber
Programmable Three Zones Thermal Shock Test Chamber is applied to aviation, military, ships, electrical, electronics, instruments and meters; medical equipment; civilian nuclear energy; colleges and universities; research laboratories; commodity inspection, arbitration, and technical supervision departments; building materials ceramic; petroleum and chemical products, For high and low temperature impact test.
Three Zone models have higher performance, three-zone capability, and larger heating/cooling performance that fully benefits from Eco-mode innovations.Equipped with original Japan made true-color touch screen controller with software of both English and Chinese version.It consists of 3 Zones:1,High temperature Zone;2,Low temperature Zone;3,Testing Zone.Adopts unique thermal-break-structure class heating & cooling storage method,then leads hot or cold air to testing zone for thermal shock tests.It can be adjusted shock temperature by switching the hot and cold air flow.
High memory capacity,can set 120 programs and each program can be repeated for max 9999 times.Each step can be proceeded for max 999 hours and 59 minutes.It's able to communicated with computer via RS485 port,so as to control,edit and record 2 groups of dynamic nodes,easy to operate.Proceeding with thermal shock conditions,users can select either 2 Zone or 3 Zone test mode.All operations are controlled by PLC.Equipped with automatic circuit and alarm signal in case of emergency,mach ine will be shut down in urgent situation.
New Eco-Mode is standard for all models. Eco-mode manages the pre-conditioning and modulates refrigeration systems to reduce energy usage. Savings of up to 50% over previous models is possible, or as much as $2,000 a year.
Two Zone models are lower cost models with only two-zone capability, lower performance, and partial savings of Eco-modGrande�??s Exclusive Touch-Screen

Most suitable for experiments requiring low-temperature conditions like microorganism or activation, cell culture process of animals and plants, good storage and desalting process of enzyme extracts, etc.
With a solid double-walled door and a full view inner plexiglass door enables inspection and monitoring of inner chamber specimens without distributing the process temperature.
Excellent quality magnetic gum packing door gasket for an external door.
User-oriented design of shelves makes you adjust each space of shelves without difficulty.
Forced air circulation at the triple-walled back by the durable coaxial blower, maintains optimum temperature uniformity and homogeneity.
High-grade HIGH PRESSURE FOAMED IN-PLACE PUF INSULATION between outer and inner chamber for minimal thermal losses.
Caster wheel mounted for easy portability.
Front double walled door is provided with lock and key arrangement.
Door operated illumination lamp is fitted inside the chamber for easy visibility.
Finned tube evaporator facilitates uniform and faster cooling effects.

NCD 1409 Toxicity Test Apparatus Railway-Grade Smoke Toxicity Testing Machine
Product Name: NCD 1409 Toxicity Test Apparatus
Manufacturer: KDM Global | Fire & Railway Testing Equipment Manufacturer
Category: Railway Fire Testing Equipment
Standard Compliance: NCD 1409 (RDSO), EN 45545-2 (Toxicity Criteria)

Product Overview:
The NCD 1409 Toxicity Test Apparatus is a specialized instrument used to evaluate the toxic gas emissions from materials when exposed to fire or high temperatures. Designed specifically for the railway sector, this machine ensures compliance with Indian Railways' RDSO specification NCD 1409, making it essential for manufacturers, testing labs, and vendors involved in railway interior materials and components.

This apparatus measures toxic gas concentrations like CO, CO, HCl, HCN, NOx, and SO, which are critical for evaluating the passenger safety risks in fire incidents.

Key Features:
Standardized Combustion Chamber: Controlled burning of material samples under consistent heat exposure

Gas Sampling System: Extracts combustion gases for toxic gas analysis

Multi-Gas Detector / Analyzer: Real-time measurement of CO, CO, HCl, HCN, NO, NO, SO

Digital Display & Data Logging: Live concentration readings with exportable reports

Test Chamber Capacity: Suitable for multiple railway material sizes

User-Friendly Design: Easy sample mounting, cleaning, and calibration

Compliant with Indian Railway Safety Standards: As per RDSO and EN 45545-2 fire safety norms

Applications:
Railway Coach Materials Testing (RDSO/EN 45545)

Rubber, insulation, plastics, flooring, ceiling, fabrics

Metro Rail & High-Speed Rail project material compliance

Pre-qualification and routine inspection testing

R&D for safer and low-toxicity materials

Why Choose KDM Globals Toxicity Test Apparatus
Compliant with NCD 1409 (RDSO) and EN 45545 fire safety standards

Designed specifically for railway material suppliers and test labs

Robust, reliable, and field-proven performance

Made in India with full service and calibration support

Easily upgradable to add Smoke Density or Cone Calorimeter modules

Competitive pricing and quick delivery across India

Technical Specifications:
Parameter Specification
Test Standard NCD 1409, EN 45545-2
Gases Measured CO, CO, HCl, HCN, NO, NO, SO
Sample Size 75 mm x 75 mm or as required
Data Output PPM levels, graphs, test reports
Combustion Source Electric or gas-based heating (as per standard)
Power Supply 230V, 50Hz
Control Panel Digital display + software interface
Calibration Support Provided with test gases and certificate
Contact Us for Quotation & Full Brochure:
KDM Global Fire Testing Equipment for Railway & Industry