Ble Data Module

Motor control solution could be widely used in AC/DC/Step/Servo motor movement control, our FOC or SVPWM control algorithm ensure the smooth running low energy consumption and low heat emission of the motor, contact us for more information.

Transient data wiring module 146031-01 for Pacitcan TPP material
skill is strong, the production of strict accordance with national standards. With the power station forging, mining metallurgy, rolling, cement and spare parts spare parts, metallurgy, rolling and other products improve the production and operation system. For hundreds of water technology change, hydropower, thermal power plant overhaul supply of high-quality equipment selection, equipment commissioning, construction plans, spare parts, after-sales service, such as through-train service. The company to undertake hydropower stations, thermal power plant unit capacity transformation, technical transformation and overhaul projects. Look forward to the major manufacturers to inquire.
Need more products for power plant now if you don't know where to search a product.
#DF-Transient data wiring module 146031-01-DF
oil press filter SJF-240*10FC
hydraulic filter size chart WU-H630*80FS
lvdt displacement transducer 7000TD 0-350MM
Generator Insulating Resin Class A E-44
hydraulic duplex oil filter SFAX.BH63*20
Hammering Motor Dual Speed Motor YD2-90L-6/4 W
hydraulic filter crossover 707FLDN50
oil filter house YWUX-630*180
Heater rod ZJ-22-12
hydraulic filter size chart CLX-100
cartridge filters WU-H10*80S
filter hydraulic oil IX-40*100
OPC Solenoid Valve
ZCZF-65F DN65
activated carbon filter cartridge ETJETJ700
oil filter house TZX2I-25*40
Oil Filter HX-630*3Q
Hydraulic Filter HX-63*1Q
oil tank precision filter MSF-04-03
Pre Filter 1300R020BN3HC/-V
EH oil filter controls the BFPT Stop valve JCAJ002
axial piston variable pump 25SCY14-1B JB/T7043
centrifugal oil filter HBX-160*40
Pump stator ring KSB65-250A
chemical filter cartridge ZX-250*80
coalesce filter HX.BH-100*30W
oil and filter XU-800*80-J
pressure hose S110-AC-AL-0040
changeover valveactuatorservo valve ZD.01.003
jacking oil system back-flushing filter HDX-10*10Q3
hydraulic filter cross reference FAX (NX)-250*5
FILTER FOR OUTLET JACKING OIL PUMP HDX-40*5
Stator Cooling Water Filter With Skeleton WFF-150*1
hydraulic oil filter pump with cart SFAX.BH250*1
best oil filter ZX*80
Current-Voltage Converter LJB1 1A/10V 0.5
Epoxy Phenolic Glass Cloth Tube 26*20*80
Transient data wiring module 146031-01

oil filter cross reference XU-A630*80FS
hydraulic filter price list WY400*20Q2

Valve Seal kit LJC50-16
hydraulic return oil filter 0508.1142T0701.AW012

transmission speed sensor CWY-DO-20T08-B-M10*1-00-05-50
oil filter lookup TZX-E63*20Q
filter hydraulic oil 0060D020BH3HC
Gas turbine seal oil vacuum pump reducer MO2225.OBMCC1D1.5A
module 708J590TV2.0

DFYL-2022-8-9-ZJ

C head style(6 positions 4 contacts)

Extremely high quality module plugs
Make the telephone cable using this plug
Gold plated contact leads for better data transmitting and higher signal strength.
Rj11 6p4c 2 fibers/conductor modular telephone plug

Description
Type: indoor
Shielded cable: no
Conductor material: cu
Jacket color: silver
Jacket material: pvc
Length: customize
Plug: 6p4c rj11

Factory presentation

Glow wire tester

Discussion of the Glow Wire Test (Varies as per relevant standard):

1. Object of the Test -

Components or parts under Fault or Overload conditions, may
attain a Temperature such that they will ignite parts in
their vicinity.

The GLOW - WIRE Test simulates thermal stresses which may be
produced by such source of heat or ignition. e.g. glowing
elements or overloaded resistors, may be for short duration,
in order to assess by a simulation technique the Fire Hazard.

2. General Description of the Test -

a. If possible, the specimen should be a complete
equipment, sub-assembly or a component.

b. While taking a part / parts of an enclosure for the
Tests, care must be taken to ensure that the Test
Conditions are not significantly different from those
occurring in the Normal usage, with regard to shape,
ventilation, effect of thermal stress and possible
flames occurring, burning or glowing particles falling
in the vicinity of the specimen.

c. The Test is applied to ensure -

1. That the Glow - wire Loop which is electrically
heated to a temperature specified, does not under
defined conditions cause ignition of the Part/Parts.

2. That the part which might have been ignited, has a
limited duration of burning, without spreading of
fire by its flame or burning or glowing particles.

d. This type of test may not be appropriate for too small
components / parts / sub assemblies, which may need
Needle Flame Test.


3. Test Apparatus -

a. The Glow - Wire consists of a specified loop of a Nickel
/ Chromium ( 80/20 ) wire of 4 mm dia.

b. Sheathed fine wire thermocouple, of overall dia. 0.5 mm
( wires of NiCr & NiAl ) with welded point / joint
located in the 0.6 mm hole in the Loop of Glow - Wire.

c. The Sheath consists of metal , resistant to a
temperature of 960 deg. C in working.

d. The instrument for measuring thermovoltage have 1 %
accuracy.

e. The Test Apparatus is so designed that the Glow - Wire
Loop is horizontal and the mounted specimen moves
horizontally towards the Loop with a force applied 0.8
to 1.2 N, for a penetration distance of 7 mm max.

f. To evaluate the possibility of spread of fire, a layer
of the material or components normally surrounded
underneath the specimen is placed underneath the
specimen at a distance equal to the distance between the
specimen and the surrounding material or components when
the specimen is mounted as in normal use.

If a subassembly or a part of the equipment is tested
separately, a piece of white pinewood board,
approximately 10 mm thick and covered with a single
layer of tissue paper, is positioned at a distance of
200+/- 5mm below the place where the glow-wire is
applied to the specimen, unless otherwise specified in the relevant specification.

SCR Electroniks make, Shutter Socket Test Apparatus is designed to carry out Socket Shutter Test¦. The apparatus is designed & manufactured exactly as per the IEC & IS Specifications
Test Apparatus consists of following parts :
1) Motor to achieve 20 cycles / minutes speed D.C. Motor of suitable is used.
2) Mechanical Assembly : Consists of following parts :
Test Plate & Test Plate Mounting Block : On Test Plate socket under test is mounted. Test Plate is in turn mounted on two Mounting Plates with provision for lateral position adjustment. to take care pf different thickness sockets. Provision is made for adjustment along X axis & Y axis, so that µTest Plug Pins¦ engage exactly in to the holes on the µSocket Under Test¦. This is stationary during test.
Test Plug with mounting arrangement (moving) : Test Plug is made as per Cl. No. 24.10 fig. No. 25 and mounted on moving block.
Movement Transfer Arrangement : Consists of (a) Circular Disc, with offset link (b) Lateral Link, connection between offset link and µTest Plug Moving Block¦.
Control Unit.
Electronic control unit is with following Controls & Indications.
Name Type Function
Power ON Switch Rocker Switch (Teknic) Puts the Apparatus ON / OFF.
Power ON Indicator Neon v Built v In Indicates Power ON / OFF
Counter + Reset Button 6 digit Gujral Make Counts no of cycles.
Hold Time Set v 2 digit. Thumb Wheel Switch To set hold time between (1-99 sec).
Micro Switch is provided to sense µLimit Position¦ of moving block in forward direction, which triggers the µHold Time Counter¦. After preset time µHold Time Counter¦ resets, and motor starts to actuate backward movement of moving block.
Battery Backup :
In case mains power goes off, in course of testing, the count is retained, and when mains power resumes the dimmer under test is restored to Off position i.e. Home Position, without this incomplete operation getting counted, and then operation starts normally.
To reset count to Zero : Put On the µPower ON Switch¦, while µReset Button is being pushed.