Protective coatings serve as a vital defense for metal structures, effectively reducing corrosion by limiting the exposure of surfaces to harsh and corrosive environments.
These coatings comprise a range of materials, including polymers, epoxies, and polyurethanes, for non-metallic protection, as well as zinc, aluminum, and chromium used in metallic protective layers.
1. Corrosion resistance
2. Abrasion resistance
3. Chemical protection
4. Thermal barrier
Thereby, enhancing the durability and lifespan of industrial and domestic applications.
Our Offerings
-- Bitumen Coating
-C/R Primer and Finish
--Epoxy Primers, Intermediates & Surface Tolerant Coatings
-Epoxy Finish, High Build coatings, Coal Tar Epoxy coatings
--Epoxy Solventless & Glass Flake coatings, Tank Linings
-HR Aluminium 250, 400 & 600 Deg
--Pipeline
-Coatings
--PU Primer, Finish & Radiation withstanding coatings
-Zinc Rich & Zinc Silicate Primers
--Various Grades Of Thinners
Two components, air drying, high build Epoxy primer. The product has the advantage of epoxy resin composition with specialty pigments, which facilitates one-coat, high build application for high performance. The product can be applied on minimum prepared surface and is designed to be completely wet and provide maximum intimacy with the substrate. Excellent adhesion is obtained on a variety of intact surfaces including over old coating and tightly adherent rust. With the high solids and less solvent content of the coating the risk of lifting, blistering, pin holing is reduced, and thus the risk of adhesion failure is minimized.
Recommended Use :-
It is recommended for steel structures in industrial plants, bridges, tank exteriors, oil tanks, pipes, marine atmosphere, cooling towers, etc. It has good resistance to spillage and fumes of acids, alkalis, fresh and salt water. Recommended as a primer on suitably cleaned mild steel surface in various Fertilizer units, Refineries, Chemical and other plants, Transportation industries, steel plants, cement plants, power plants, pulp and paper industries, pharmaceutical industries, etc. for application on tank exteriors, structural steel, pipelines, machineries, vessels, etc.
Physical Data
COLOUR : Selected Industrial shades
FINISH : Matt
SOLIDS BY VOLUME : 63 + 3%
THEORETICAL SPREADING RATE : 8.4 sq.mt / lt at a recommended DFT of 75
FLASH POINT : Base : Above 25C Hardener : Above 25C
DRYING CHARACTERISTICS (At 30C & 65% Relative Humidity) : HARD DRY : 16 - 18 hours FULL CURE : 7 days
SHELF LIFE : Base: 6 months Hardener: 6 months
Surface Preparation
Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible than manual cleaning by mechanical methods like wire brush, emery paper, hand / power tools, etc. to achieve St-2 / St-3 cleaning standards of Swedish specification. The surface should be free from moisture, oil, dust and dirt and should be absolutely dry before painting. Removal of loose rust is a must.
Application Data :-
MIXING RATIO : Base : Hardener (As per our recommendation )
POT LIFE : 2 hours at 30�°C
APPLICATION : By Brush / By Conventional Spray / By Airless Spray
THINNER : Epoxy Thinner 190
RECOMMENDED DFT : 75-100 �µ.
OVERCOATING INTERVAL : MIN : 8 hrs. MAX : 24 hours (In case it is exceeded, the surface should be roughened byemery scuffing)
OVERCOATABILITY : Epoxy, PU, Chlorinated Rubber and Synthetic Enamel intermediate &finish coat.
National Paints is a leading manufacturer of decorative and industrial coatings, known for their commitment to quality and durability. With their vast range of paints like National Guard Epoxy Flooring Topcoat or National Lacquer Thinner, primers, and specialty coatings, National Paints offers solutions for various surfaces and environments.
NEOGUARD Epoxy Paints are 'Epoxy' based top coat offering good resistance to water and humidity. These products are designed to offer superior corrosion protection to mild steel substrates. The product has got excellent adhesion strength and also offers a balanced aesthetic and corrosion protection. NEOGUARD epoxy Paints also show good Chemical & Salt Resistance. Neo Guard Epoxy Paints are available in High Glossy / Semi Glossy varieties. Special products with accelerated curing speed are also available
