Product Grade: As per Client Requirement (MS/SS, etc)
Minimum and Maximum Price: As per Request
Price Units: USD
Incoterms: As per Mutual Understanding with Buyer
Product Origin: India
HS Code: Provided as per product
Minimum Order Size: NO MOQ (We can cater small quantities also)
Packaging Details: For Export Material (Export Quality Wooden Box)
Ring Joint gaskets are developed for use in the petroleum industry.Ring Joint gaskets are widely used between pipeline flanges, valves and pressure vessels in the Oil & Gas industry. High operating pressure up to 1378 bar when applied in API 6B.Corrosion and chemical resistance are depending on the selected RTJ gasket material.
Description:
A Companion Flange, sometimes referred to as a hub, is a flange that corresponds to another flange. It has bolt holes that align with another flange is a trait of this type of flange. Usually a companion flange features a Raised Face (RF) or Ring Joint (RTJ), with a threaded outlet. Also called a Threaded Flange by some people.
Orifice flanges usually apply to measure the volumetric flow of liquids and gases through a pipe. Two orifice flanges are referred to as an orifice flange union. Each flange is equipped with two valves to measure the pressure drop of the flow through an orifice plate. The orifice plates do not come with the flanges and are dimensioned according to the requirements of the process. Two screws are used to spread the flanges to change the orifice plate. This flange is normally available in welded, sliding and threaded flanges. The orifice flanges generally have an elevated face. They are usually used for a general and mechanical engineering purpose and also for structural purpose.
Orifice Flanges generally come with either Raised Faces or RTJ (Ring Type Joint) facings. They are, for all intensive purposes, the same as weld neck and slip on flanges with extra machining.
We also make a set Orifice Flanges, where a Orifice Plate is mounted and a jack screw is machined. This jack screw is used to facilitate separating the flanges for inspection or replacement of the Orifice Plate and gaskets.
The range of orifice flanges covers all standard sizes and ranges, and all common flange materials. Flanges are available in Welding Neck, Slip On, and Threaded form, and are typically supplied with two 1/2" NPT tappings in each flange.
This division is leading manufacturer and stockist of Flanges. This flanges are manufactured and supplied in different a range of pressure ratings and sizes and with different specification to meet customer requirement. This flanges to be used in industries like pipeline engineering, oil and gas industry, mechanical and plant engineering, marine industry, waste water management, chemical industry, petrochemical industry, power industry, aerospace, food processing and many more.
Industrial Steel Flanges, Manufactured as per ANSI B 16.5 / DIN / JIS – Stainless Steel Flanges, Carbon Steel Flanges, Alloy Steel Flanges.
Product Details
Flange Stock/Manufacturing Range: (ANSI / ASME Flanges)
Size Range : ½" (15 NB) to 48" (1200 NB)
Standards : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API 605, AWWA, Custom Drawings.
Pressure Ratings : Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500, Class 2500 PN6, PN10, PN16, PN25, PN40, PN64 Etc.
Type of Flanges : Weld Neck Flanges (WNRF), Slip-on Flanges (SORF), Blind Flanges (BLRF), Lap Joint Flanges (SOLJ), Socket-weld Flanges (SWRF), Screwed (Threaded) Flanges, Long Weld Neck Flanges (LWNRF), Spectacle Blind Flanges, Spacer & Blind Flanges, Ring Type Joint Flanges (RTJ), Reducing Flanges, Raised Face (RF) Flanges, Orifice Flanges, Large Diameter Flanges, Custom Flanges, Drawing Flanges, Forged Flanges, Plate Flanges, Flat Face Flanges Etc.
Flange Face Type : Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Coating /Surface Treatment : Anti-Rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Special Requirement : With such a vast experience and expertise, other special large diameter flanges can also be supplied on customer demand.
specifications.
The flange is slipped over the pipe and then welded both inside and outside to provide sufficient Strength and prevent leakage. This flange is used in preference to weld necks by many users because of its lower cost and the fact that less accuracy is required when cutting pipe to length.
SLIP-ON FLANGE, SO FORGED FLANGES PRODUCTION RANGE
Size: 1/2? (15 NB) to 48? (1200NB)
Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Ratings: Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.
Carbon Steel Slip-on Flanges: ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8
Stainless Steel Slip-on Flanges: ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L
Alloy Steel Slip-on Flanges: ASTM A182 F1, F5, F9, F11, F22, F91
Special Alloy Slip-on Flanges: Duplex, Super Duplex, Nickel Alloys
Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Coating/Surface Treatment: Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Value Added Services: CNC Machining, Customised Flanges
Sizes for Slip On Flanges
All Slip On Flanges are available available in sizes from 1/4” through to any size.
Wall Thickness for Slip On Flanges
Schedule 5s through to Schedule XXS and heavier.
Dimensions
Diameter : 1/2? to 24?
Pressure class : 150#, 300#, 600#, 1500#
Dimensions and Pressure Ratings for Slip On Flanges:
ANSI, MSS- SP-44, BS3293, API 605 150lb through to 2500lb
Flange Facings: Raised Face, Ring Type Joint, Large Tongue & Groove, Small Tongue & Groove
BS4504, PN6, 10, 16, 25, 64
BS10, Table D, E, F, & H
DIN Standards
The Non-Return Valves Types that we manufacture are innumerable. Our Clapper type non return valves manipulate the pressure conditions ensuring the liquid to flow in the right direction. We carefully design spring type non return valves keeping all the pressure levels in view. Depending upon the NRV Valves specification, we finely finished our products with extreme dimensional accuracy.
We choose premium quality raw material to produce flawless and rust free Stainless Steel Non Return Valves and Alloy Steel Non Return Valves. All of our metals are lent from honest and genuine vendors. Our Aluminium Non Return Valves and Brass Non Return Valves exhibit properties like corrosion resistance and durability. On the other hand, our Bronze Non Return Valves are employed in cooling systems, heating systems, and domestic water systems.
For further details about our products, please refer to our official website. Feel free to contact our work personnel in case of any queries. Have a glance at your desired product, and place the order right now!
Clapper type non return valve, Spring type non return Valve, Flanged End Non Return Valves, Butt weld End Non Return Valves Dealer & Wholesaler
ANSI/ASME B16.10 Non-Return Valves Specifications:
Size 15mm to 1000 mm
Pressure Rating ASA 125#, 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN40, PN64
End Connection Screwed to BSP, BSPT, NPT, Socket Weld, Butt Weld Ends, Flanged Ends, Ring Type Joints(RTJ)
Manufacturing Standard BS-1868, API 6D, BS 5153 (EN 12334) / IS 5312 Part 1 & 2
Material OF Construction CI, CS, SS, AS, LCB, WC6, WC9
Type Swing, Lift-Up
