Microprocessor Melting Point Apparatus

The instrument basically consists of a Miniature Furnace with Automatic Ramp Rate of Heating, Microprocessor Controlled, Visual facility is provided through Magnifying display of melting operation under front & rear illumination controlled (Light intensity adjustable) with the help of magnifying glass. Melting point reading put on hold as soon as the melting of sample visualize, by activating to press the MELT key.

Features:-

3 Digit LED Display
Suitable for Any Dark Colored Samples.
350C Temp. Range
Durability and Longevity

Technical Specification:-



Temp. Range
Ambient to 350C


Display
3 Digits LED


Resolution
1C

Temp. Sensor
Grade PT-100, Platinum Sensor

Sample Capacity
3+1 provision for Samples (one 6mm) Test Tube, for the determination of Boiling Point & Melting Point.

Application Area
Miniature Furnace Module

Application
Suitable for Boiling & Melting Point

Melting View
Front & Rear Glare-free illumination and Large Magnifier for Stain free Observation of melting operation, Melting / Boiling point reading is to be hold on by activating the HOLD key & reading is protected from power failure till RESET is not activated.

Heating Control
Microprocessor controlled closed loop PID, Automatic Ramp Rate of Heating


Ramp Rates
2C to 10C/minute (Selectable Auto-Low-High),

Power Supply
230 V ± 10% AC, 50 Hz.

Dimension
270X330X160 mm (LXBX)

Weight
8.5 KG

The instrument basically consists of a Miniature Furnace with Automatic Ramp Rate of Heating, Microprocessor Controlled, Visual facility is provided through Magnifying display of melting operation under front & rear illumination controlled (Light intensity adjustable) with the help of magnifying glass. Melting point reading put on hold as soon as the melting of sample visualize, by activating to press the MELT key.

Features:-

128 X 64 Graphical LCD Display
High Resolution Camera for Viewing Capillaries
Grade A PT-100, Platinum Sensor
USB to PC Interface

Technical Specifications:

Temp. Range
Ambient to 350C

Display
128 X 64 Graphical LCD


TFT ScreenHigh Resolution Camera for viewing capillaries

Resolution
0.1C

Temp. Sensor
Grade PT-100, Platinum Sensor

Sample Capacity
3+1 Samples (one 6mm provision) Test Tube, for the

Determination of Boiling Point of Any Liquid.

Application Area
 Miniature Furnace Module


Application
Suitable for Boiling & Melting Point

Temp. Control & Ramp Rate Heating
Microprocessor controlled closed loop PID, Auto / Adjustable
Ramp Rate Heating 2C to 10C/minute by UP/ DOWN keys, can  be increased or decreased during running / operation

Melting View
Front & Rear Glare-free illumination and Large Magnifier for Stain free Observation of melting operation, Melting / Boiling point reading is to be hold on by activating the HOLD key & reading is protected from power failure till RESET is not activated.

PC Interface
USB to PC

Power Supply
230 V + 10% AC, 50 Hz.

Dimension
270X330X160 mm (LXBX)

Weight
8.5 KG

128X64 Graphical LCD Display, Resolution 0.1C, Temp. Range- Ambient to 350C The instrument gives audio & visual indications, on reaching the temperature at which the sample melts. PC interface: USB to PC, Grade A PT-100, Platinum sensor. Suitable for Melting Point Only.

Technical Specifications:-
Temp. Range
Ambient to 350C

Display
128 X 64 Graphical LCD


Resolution
0.1C

Temp. Sensor
Grade A PT-100, Platinum Sensor

Sample Capacity
3 Samples, Capillary Dimension 1.4 mm

Application  Area
Miniature Furnace Module


Application
Suitable for Melting Point only

Temp.  Control & Ramp Rate Heating
Microprocessor controlled closed loop PID, Auto

Adjustable Ramp Rate Heating 2C to 10C/minute by

 UP/ DOWN keys, can be increased or

decreased during running / operation


Operation
Auto determination of Melting Point for all 3 Samples separately


Application Area
Miniature Furnace Module


PC  Interface
USB to PC


Power Supply
 230 V + 10% AC, 50 Hz.

Dimension
270X330X145 mm (LXBXH)

Weight
8 KG


OPERATION: Fully Automatic Sample Fill and Forget: All the selection of programming is fully protected from power failure including HOLD action of melting temperature. Once the start action is initiated, it will reach to find out the melting point of sample.

Opto-coupled I.R. Transmission based. Only Crystalline sample (Sample required to be transparent at the time of melting, not Suitable for Dark Colored Samples).

Melting Point Apparatus

Melting-boiling Point Apparatus

Melting Point Apparatus

The Aniline Point of an oil is defined as the minimum temperature at which equal volumes of aniline (C6H5NH2) and the oil are miscible, i.e. form a single phase upon mixing.

The value gives an approximation for the content of aromatic compounds in the oil, since the miscibility of aniline, which is also an aromatic compound suggests the presence of similar (i.e. aromatic) compounds in the oil. The lower the aniline point, the greater is the content of aromatic compounds in the oil.

The aniline point serves as a reasonable proxy for aromaticity of oils consisting mostly of saturated hydrocarbons (i.e. alkanes, paraffins) or unsaturated compounds (mostly aromatics). Significant chemical functionalization of the oil (chlorination, sulfonation, etc.) can interfere with the measurement, due to changes to the solvency of the functionalized oil.

METHOD A: ANILINE POINT APPARATUS as per IP 2 & IS 1448 (P-3), ASTM D 611 METHOD A, complete with jacket (without thermometer)

Optional Accessories:
• Spare outer jacket with cork
Spare tube with cork
• Heater for above with energy regulator

METHOD B: ANILINE POINT APPARATUS as per IP-2 method B, IS 1448 (P-3), ASTM D 611 by thin film METHOD B, Electrically heated with motorized stirrer (without thermometer).
The apparatus consists of an Archimedean type pump ie. glass tube pump body, S.S. pump, variable speed small motor, within an Aniline sample container with an integral light well, illuminated by a 6 V lamp. The whole assembly is heated in small glass beaker bath controlled by energy regulator. Electrically operated stirrer is also provided.
Optional Accessories:
• Spare tap
• Spare Contraction chamber
• Spare metal stirrer

METHOD C: ANILINE POINT APPARATUS for volatile liquids as per IP-2 method ‘C’ (without thermometer).

METHOD D: ANILINE POINT APPARATUS as per IP-2 1977, METHOD D by U-tube method electrically heated with FHP stirrer without thermometer.
The apparatus consists of U-tube assembly which is mounted in a glass bath which is heated electrically and controlled by energy regulator. A small electric motor stirrer is provided for the bath.
Optional Accessories:
• Spare ‘U’ tube

Thermometer for Aniline Point:
• I.P.20C (-38/42ºC x 0.2C).
• I.P.21C (-25/105ºC x 0.2C).
• I.P.59C (90/170C x 0.2C).

The apparatus consists of brass test cup with handle removable cup cover with spring operated rotating shutter having oil test jet flame device, stirrer with flexible shaft. The assembly rests in air bath which is covered with dome shape metal top. The cup is fitted with insulated handle and locking arrangement near cup flange. The assemble is kept on round shape electric heater with temp. Regulator. Suitable for operation on 220 volts 50 hz.

Pensky marten flash point apparatus (semi automatic)
Our semi-automatic pensky martens flash point apparatus are available with following features:
This apparatus is made as per ip34, astm d–93 and is 1448 (part i) 1270 (p.21) and is 1209-1953 method b.
Used for finding out flash point above 70°c and below 300°c.
The instrument having oil test jet (or) gas test jet flame device, stirrer with flexible shaft.
The assembly rests in air bath which is covered with dome shape metal top.
The cup is fitted with insulated handle and locking arrangement near cup flange.
Electronic temperature controller with automatic dipping cycle with remote control oil (or) gas jet.
Suitable to operate on 220 volts, 50 hz.

Pensky marten flash point apparatus (fully automatic)
Fully automatic pensky marten flash point apparatus is fitted with microprocessor controller with lcd display. Temperature range form 80 c to 350 c with 0.01c direct resolution. Automatic stirrer gas test jet system.

The low-melting glass powder are applied in electrical industry for seal the multicolor kinescope, vfd, pdp and so on. By the joint efforts of scientific and technological personnel, our company have developed the lead free low melting point glass powder successfully.Through trial by customers, reflecting good volume has been listed. The product performance indicators have reached the international advanced standards.
We can give the most competitive prices compared with other manufacturers since we have innovated the production process.We are pleased to supply the best service and products to customers all over the world.


Packing: 25kgs/iron drum