Digital Disintegration Test Apparatus

It is used to determine disintegration time of tablets and capsule. Our Tablet Disentegration Test apparatus is designed as per pharmacopeia specification. It is provided with six-digit digital timer to monitor disintegration time of sample.Temperature control (digital with readability of 0.1). Hold and resume facility for confirming disintegration, alarm at completion of test, time control digital (Programable from 000.1 min 999.9min), precise water bath for heating, up-down speed: 30±2 Strokes/min

Features:-

Programmable time with digital display
Auto stop after the set time with audio alarm for enteric coated tablets
Facility to hold and resume the time and motor movement for quickly disintegration tablets.
Manual mode of operation in case digital system fails
Special low RPM motor means less noise and constant speed even at very low/high voltage (160-260)
Heating control through digital temp. meter

Model
S- 940

Up-Down Speed
30 + 2 RPM


Up-Down Length
55 + 5 mm


Time Display
1 Digit for Hr and 2 for mint

Electric Motor
Low RPM A.C. Motor

No. of Basket
2

Temperature Control
Digital Display

Audio Alarm At Completion
Yes


Hold & Resume Facility
Yes

Type of Heating
Water Bath Type

Dimension
305X330X385  mm (LXBXH)

Digital Friability Test Apparatus is a precision instrument suitable for measuring abrasion strength of tablets. The unit is equipped with two transparent acrylic drums which rotate at a speed of 25 +- 1 rpm. Each of the two acrylic drums are provided with an arm which carries the tablets along with it up to a predetermined height and allows them to fall from that specified height, while the drums are rotating, It is fitted with a digital revolution counter showing the current number of revolutions for the test. A thumb wheel switch is used to set the desired number of rotations. Provision is made to remove the lid of the acrylic drum by unscrewing just one knob. This is available in 1 drum and 2 drum assemblies.

Technical Specifications:-

Model
S- 938


Display
4 Digit bright red seven segment LED display

Accuracy
Revolution


Resolution
1 Revolution


Range
99.59 Minutes


No. of drums
2


Operating Temp. Range
10 - 50C

Power Supply
230 V,+10% AC, 50 Hz

Dimension
245X210X245 mm (LXBXH)

Weight
9.5 KG (Approx.)

Disintegration Test Apparatus

Disintegration Test Apparatus

Microprocessor Dissolution Test Apparatus is a solid state instrument designed for the determination of active drug ingredient in any pharmaceutical formulation, tablet or capsule as per IP and USP specifications. This apparatus evaluates adequate bio-availability and provides necessary information to formulate in the development of therapeutically optimum dosage forms. The instrument is designed and manufactured for pharmaceutical industries. It is used in quality control and R & D to determine compliance with the dissolution requirement of the Tablet and Capsule as per USP/IP standards.

Features:-

8 Stations
Complies with USP, IP specifications
Extremely Useful for Pharmaceutical Labs
Highly Accurate and Easy to Operate
Programmable Stirrer Speed Control i.e. (25 â?? 200 RPM)
0 x 4 Line Alphanumeric LCD with Backlit
19 Soft Touch Membrane Type Keys
Three Programming Modes i.e. Routine, Sustain and Control
20 Independent Programmable Setups for Routine and Sustain Mode with Storage Facility
200 Samples Storage Facility
Printer Attachment Facility
Audio Visual Indicators for System Status
Easy to Empty & Clean the Water bath with Bottom Drainage

Technical Specifications:-



Model
S- 958


General


Stations
8 Stations


Display
20 X 4-line Alphanumeric LCD Display with Backlit


Key Board
19 Soft Touch Membrane Type Keys


LED's
4 LED's for different Status Indications, 3 LED's for Test Status Like Run, Alarm, End & 1 LED for Heater ON/ OFF Status.


Setup Data
Facility for 20 Different Test Setups Available in Routine and Sustain Modes


Printer Attachment
Provision for the attachment of dot-matrix printer with Centronics Parallel Port Interface Available


Stirrer


Speed
25 to 200 RPM + 1 RPM


Resolution
1 RPM


Accuracy
+1 RPM


Temperature


Range
30 To 50 Degree Celsius


Accuracy
+ 0.2 Degree Celsius


Temp. Control
Microprocessor Based Using PT 100/ Semiconductor Sensor as Per IP/USP


Sample


Reaction Vessel
1000 ml Jar with Acrylic Cover Stirrer Pedal and Mesh Basket


Heater
0.5 KW


Power
230V, - 10%, 50 Hz, AC


Weight
65 Kg. (Approx.)



Accessories:-

Main Unit with Acrylic Tank and Rectangular Cover Plate and Water Bath Temperature Sensor (T1)
External Temperature Sensor (T2) for Vessel
Reaction Vessel capacity 1000 ml
Round Acrylic Cover Plate with Hole and a large slit
S.S. Paddle, S.S Wire Mesh Basket
Glass pipettes with rubber bellows
Mains Lead
Instruction Manual
Dust Cover

The Digital Bulk Density Apparatus is a microprocessor based instrument designed to study the packing down of powder beds of different pharmaceutical & chemical powders and gives accurate & repeatability of the result.

Bulk Density is an essential test required in the process of Tablet manufacturing, capsules filling and cosmetics manufacturing as important part of quality control program. 4 digit microprocessor based Pre-set counter provided to set exact no of strokes. This feature eliminates the tedious calculation of Timer Mode. A common holder for both the cylinder drops down smoothly from the specified height. Easy to lock cushioned holders are provided to hold the cylinder. In power failure, the non-volatile memory of the microprocessor remember the last mode of operation, and complete the test after the power supply is resumed. It has the following features:
Specifications :

Display: Digital 12 mm Red LED
Speed range - 30RPM

Mechanical Timer/Digital counter as per enquiry.

Brazilian test apparatus

It is also called rock tension testing machine. Brazilian test is a test for indirect measurement of tensile strength of rocks.

The instrument is useful for testing specimen from 50 mm dia to 100 mm dia and of thickness of half the diameter. The specimen is held in circular jaws, this is primarily similar to a compression machine and consists of a small load frame having sturdy base with two vertical threaded rods and an adjustable cross head. The hydraulic jack is fitted at the centre of the base of the load frame. The jack of the load frame is self retracting and two plain plates are supplied.

A pressure gauge capacity 0-200kn x 2 kn is fixed at the base of jack. A maximum pointer is also provided on the gauge, a pair of semi circular platen for 50 mm dia samples also provided. This instrument can be used in field also. Supplied complete with the steel balls.

Order code Product
Lisc-563 Brazilian test apparatus with 50 mm dia jaws

Conforms to is: 10050-1981, & astm d 4644

This apparatus is used to assess the resistance offered by a rock sample to weakening and disintegration when
Subjected to drying and wetting in a slaking fluid, usually water. The equipment meets the essential
Requirements of is:10050 -1981 & astm d 4644 and comprises the following:

A motor drive with reduction gear mounted on a base board and capable of rotating four drum assemblies at a
Constant speed of 20 rev/min approximately. The motor drive is totally enclosed in a hinged cover for quick
Accessibility. An operating switch is provided in the cover.

Two / four test drums made of brass wire mesh, with one end closed and having a removable cover on the other
End. They have suitable couplings for mounting in the perplex water troughs. The drums are 140 mm in diameter
And have an unobstructed length of 100 mm.

Two / four perplex water troughs, accommodate one test drum each. These drums carry quick couplings on either
End which are in turn coupled with couplings of the motor drive. The troughs allow 40 mm unobstructed clearance
Below the test drum. A water level mark is provided in each water trough 20 mm below the axis of rotation of the
Drum.

Suitable for operation on 220 volts, 50 hz, single phase ac supply.

Order code Lisc-557a Lisc-557b
No. Of test drums 2 4

This method is used for determining the ductility of bituminous / asphaltic materials by measuring the elongation before breaking when two ends of a briquette specimen are pulled apart at a speed of 50mm/min ±25mm per mount at a temperature of 25c ± 0.50c.

Specifications:

The apparatus consists of a water bath with a digital temp. Controller cum indicator, and a circulating pump to maintain uniform water temperature. One half of the briquette moulds is fixed on a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating threaded shaft with a clutch. The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath. A
Pointer fixed to the carrier moves over a scale graduated from 0-110 cm x 1mm fixed on the bath with “0” (zero) of the scale towards the fixed plate side. The rotating shaft has 2 speeds of travel for the bracket, 5cm/min and 1 cm/min. Selected by a clutch. Water bath inside is stainless steel with an insulation and a water drain. A heater with digital temp. Controller cum indicator is fixed inside the water bath. Control switches for motor, stirrer, heater and indicator lamps are fixed at a convenient place on the water bath. Supplied complete with three ductility moulds and one base plate.

Operates on 230 volts a.C. Single phase.