Ss Sheet Ba Finish

Product Details:
Thickness/Diameter 2-3 inch, >4 inch, 3-4 inch, 1-2 inch, 3 meter, 0-1 inch
Finish Customised, Polished
Shape Corrosion Resistant, Round
Condition Pharmaceuticals
Is It Anodized Anodised
Customisation New
Is It Corrosion Resistant Anodized
Application Construction, Automobiles, Manufacturing
Is It Anodised Unpolished
Minimum Order Quantity 250 Kilogram
Brand Cromonimet Steel Ltd, Imported
Payment Terms 100% Advance Against Proforma Invoice. Sorry no credits
Third Party Inspection (TPI) Allowed. Charges to be borne by buyer.
Test Certificate NABL Government approved laboratory reports can be provided.
Grade 316L, AISI 316L, SAE 316, Stainless Steel 316L, Austentic 316L Stainless Steel, SS 316L, SS316L
Size 1-10 mm, 10-20 mm, 20-30 mm, 30-40 mm, >40 mm
Unit Length 3 m / 6 m
Material Stainless Steel

We can offer 316L, AISI 316L, SAE 316L, Stainless Steel 316L Round Bar & Rods, 316L round bars, Stainless steel 316L rods, Stainless steel 316L Flat bar, 316Lstainless steel square bar, 316L rectangular bar, 316L rolled bar, 316L forged bar, 316L machined rod.

Grade 316L represents the optimum in machinability among the austenitic stainless steels. It is primarily used when production involves extensive machining in automatic screw machines. Machinability Rating (compared to B1212) is approximately 78%.


Client can procure smaller quantities of Stainless 316L steel Bar & Rod online ready stock from us at premium prices in any destination by just sending us an email.

If any requirements for 316L, AISI 316L, SAE 316L, Stainless Steel 316L Round Bar & Rods, 316L round bars, Stainless steel 316L rods, Stainless steel 316L Flat bar, 316Lstainless steel square bar, 316L rectangular bar, 316L rolled bar, 316L forged bar, 316L machined rod kindly do contact us.

Product Details:
Thickness/Diameter 2-3 inch, >4 inch, 3-4 inch, 1-2 inch, 3 meter, 0-1 inch
Finish Customised, Polished
Shape Corrosion Resistant, Round
Condition Pharmaceuticals
Is It Anodized Anodised
Customisation New
Is It Corrosion Resistant Anodized
Application Construction, Automobiles, Manufacturing
Is It Anodised Unpolished
Minimum Order Quantity 250 Kilogram
Brand Cromonimet Steel Ltd, Imported
Payment Terms 100% Advance Against Proforma Invoice. Sorry no credits
Third Party Inspection (TPI) Allowed. Charges to be borne by buyer.
Test Certificate NABL Government approved laboratory reports can be provided.
Grade 316L, AISI 316L, SAE 316, Stainless Steel 316L, Austentic 316L Stainless Steel, SS 316L, SS316L
Size 1-10 mm, 10-20 mm, 20-30 mm, 30-40 mm, >40 mm
Unit Length 3 m / 6 m
Material Stainless Steel

We can offer 316L, AISI 316L, SAE 316L, Stainless Steel 316L Round Bar & Rods, 316L round bars, Stainless steel 316L rods, Stainless steel 316L Flat bar, 316Lstainless steel square bar, 316L rectangular bar, 316L rolled bar, 316L forged bar, 316L machined rod.

Grade 316L represents the optimum in machinability among the austenitic stainless steels. It is primarily used when production involves extensive machining in automatic screw machines. Machinability Rating (compared to B1212) is approximately 78%.


Client can procure smaller quantities of Stainless 316L steel Bar & Rod online ready stock from us at premium prices in any destination by just sending us an email.

If any requirements for 316L, AISI 316L, SAE 316L, Stainless Steel 316L Round Bar & Rods, 316L round bars, Stainless steel 316L rods, Stainless steel 316L Flat bar, 316Lstainless steel square bar, 316L rectangular bar, 316L rolled bar, 316L forged bar, 316L machined rod kindly do contact us.

Approx. Rs 206 / Kg

Product Details:
Thickness 5 mm
Color Silver
Usage/Application Elevator Cabins
Surface Treatment Coated
Shape Rectangular
Material SS
Size 8 x 4 Feet
Country of Origin Made in India

These Decorative SS Vibration Finish Sheets are imported from the best manufacturers and dealers around the Globe.

Vibration Finish Sheets are also called as Angel Hair Finish Sheets or Non-Directional Satin Finish Sheets.

These Sheets have a multi-directional finish. This kind of Finish has a uniform texture with random, multi-directional grit lines. We hold a strong grip over a vast dealers network and suppliers chain ascertaining quality provisions and an organised reach for the same.


We also stock Sheets with Hand Made Vibration Finish.


All our Decorative Sheets are protected by Laser Protective film of around 70 Microns to protect the Sheets while Laser Cutting.

Approx. Rs 208 / Kg

Product Details:
Thickness 10 mm
Color Silver
Usage/Application Elevator Cabins
Surface Treatment Coated
Shape Rectangular
Material SS
Size 8 x 4 Feet
Country of Origin Made in India

These Decorative SS Brushed Finish Sheets are standardised and professionally monitored under a strict technical observation and then provided to you with utmost superior quality and excellence, across the globe. Super Mirror Finish is the most perfect polish that can be produced on stainless steel.

They are highly reflective, more than the Mirror Finish Sheets. Like Other Stainless Steel Sheets, even it can be fabricated with conventional sheet metal machinery. Folded, rolled, and engraved. We hold a strong grip over vast dealers network and suppliers chain ascertaining quality provisions and an organised reach for the same.

All our Decorative Sheets are protected by Laser Protective film of around 70 Microns to protect the Sheets while Laser Cutting.

Available Decorative Stainless Steel Brushed Finish Sheets Sizes, Thickness & Grades

Width in mm Length in mm Thickness Grades
1219 2438 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1mm,
1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.5mm & 3mm
SS 201 / SS 202
SS 430
SS 304 / SS 304L
SS 316 / SS 316L
1219 3048
1219 4000
1524 3048
Other Sizes & Thickness On Request
Also Available in Cut to Size as per Your Requirement

Approx. Rs 215 / Kg

Product Details:
Thickness 10 mm
Color Silver
Usage/Application Construction
Shape Rectangular
Material SS
Size 8 x 4 Feet
Country of Origin Made in India

These Decorative SS Satin Finish Sheets are standardised and professionally monitored under a strict technical observation and then provided to you with utmost superior quality and excellence, across the globe.

Satin Polish is generally produced by using successively finer abrasives between 180 to 240 grit.

This gives a fine grain Non-Reflective Finish. We hold a strong grip over a vast dealers network and suppliers chain ascertaining quality provisions and an organised reach for the same.


All our Decorative Sheets are protected by Laser Protective film of around 70 Microns to protect the Sheets while Laser Cutting.

Available Sizes, Thickness & Grades For SS Satin Finish Sheets

Width in mm Length in mm Thickness Grades
1219 2438 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1mm,
1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.5mm & 3mm
SS 201 / SS 202
SS 430
SS 304 / SS 304L
SS 316 / SS 316L
1219 3048
1219 4000
1524 3048
Other Sizes & Thickness On Request
Also Available in Cut to Size as per Your Requirement

Approx. Rs 180 / Kg

Product Details:
Thickness 2-3 mm
Type Plate
Shape Rectangular
Steel Grade SS304 L
Size 8 x 4 Feet
Material SS
Surface Treatment Coated

Our principals are extensively professional and are present all across the globe, richly enhanced with quality and excellence. At FeCuNi, we have structured material organising, handling and storage system which enables to profoundly protect these highly finished Sheets from any of the minute handling damages.

It is a process to produce a metal vapour (Titanium, Chromium & Aluminium) that can be deposited on electrically conductive materials as a very thin and highly adhered metal. This process is carried out in a vacuum chamber where Cathode Arcs are used as a source.

PVD gives not only superior hardness but it is also wear-resistant, thus making it one of the best methods for enhancing thin film plating element

Approx. Rs 177 / Kg

Product Details:
Type Plate
Material Grade All
Surface Treatment Coated
Steel Grade SS316 L
Material SS
Thickness 0-1 mm

Our principals are extensively professional and are present all across the globe, richly enhanced with quality and excellence. At FeCuNi, we have structured material organising, handling and storage system which enables to profoundly protect these highly finished Sheets from any of the minute handling damages.

Backed up by highly professional team, FeCuNi offers you the Best Product in its class. FeCuNi strives best to serve you with High End Architectural Metals. Stainless Steel Sheets are coloured by PVD or Physical Vapour Deposition process.

It is a process to produce a metal vapour (Titanium, Chromium & Aluminium) that can be deposited on electrically conductive materials as a very thin and highly adhered metal. This process is carried out in a vacuum chamber where Cathode Arcs are used as a source.

Almost all the desired colours can be achieved by adding different gas elements during the PVD process.



Surface Finish Options for PVD Stainless Steel Sheets or Stainless Steel Coloured Sheets
Mirror Finish Hairline Finish Vibration Finish
Bead Blast Finish Satin Finish Matte Finish
Scotch Brite Finish 3D ART Textured Colour Sheets Etched
Punched Colour Sheets Pressed Colour Sheets Combination of Different Surface Finishes (*Custom Made)

Approx. Rs 184 / Kg

Product Details:
Thickness 2-3 mm
Type Plate
Steel Grade SS316 L
Color Silver
Size Size
Material material
Brand brand
Melting Point MP
Surface Treatment Coated
Certification ROHS

Almost all the desired colours can be achieved by adding different gas elements during the PVD process.

The thickness or the coating layer that can be achieved by this process is usually 1 to 2 microns.

PVD gives not only superior hardness but it is also wear resistant, thus making it one of the best methods for enhancing thin film plating element.

Surface Finish Options for PVD Stainless Steel Sheets or Stainless Steel Coloured Sheets
Mirror Finish Hairline Finish Vibration Finish
Bead Blast Finish Satin Finish Matte Finish
Scotch Brite Finish 3D ART Textured Colour Sheets Etched
Punched Colour Sheets Pressed Colour Sheets Combination of Different Surface Finishes (*Custom Made)

Approx. Rs 182 / Kg

Product Details:
Type Plate
Shape Rectangular
Surface Treatment Hot Rolled
Steel Grade SS304 L
Material SS
Thickness 4-5 mm
Size 8 x 4 Feet

All our Decorative Sheets are protected by Laser Protective film of around 70 Microns to protect the Sheets while Laser Cutting. Available Sizes, Thickness & Grades For SS Satin Finish Sheets