Copper Plating Stabilizer

FEATURES
Power Rating500VA-10KVA / 5KVA-45KVA
Power Factor0.8
Reset SwitchManual Reset Switch
Bypass SwitchManual Bypass Switch For 3 KVA - 60 KVA, OPTIONAL
IndicatorInput/Output Voltage (OPTION: VOLTMETER, NIXIE TUBE, LED, LCD)
Operating Temperature0 ~ 40 C
Relative Humidity0 - 90%
MAIN TECHNICAL INDEX : SERVO SYSTEM(MICROPROCESSOR CONTROL FOR LCD TYPE)
Voltage Regulatotion SystemServo Motor System
Input Regulation System220V+15%/-25%(160-250V), 1 Phase (100V, 110V Option)
Output Voltage Regulation220V+/-3%, 1 Phase (100V, 110V Option)
Frequency50 Hz +/-5%
EfficiencyBetter than 95% at full load, 198-220V input voltage
Electric Appliance1500v/min no flashing nor puncture
Insulation Resistancemore than 2M Ohm
Output Wave FormSine wave (Synchronize with input wave form)
Output Wave Form DistortionNo additional distortion
Harmonic DistortionLess Than 0.5%
Response TimeLess than 1 second (the input votlage changed 10%)
PROTECTION SYSTEM (OPTIONAL)
Surge ProtectionAutomatic shutdown
Overlaod ProtectionCircuit breaker or Fuse
Time Delay- Short time delay: 5 seconds ± 2 seconds
- Long time delay: 5 minutes ± 2 minutes
Automatic Shutdown- Output voltage out of limits: 245±5V, Manual Reset
- Output voltage out of limits: 185±5V, Automatic Reset
- AC voltage flicker
- Output Short Circuit
- Phase fault
- Power failure or Interruption
- Power semiconductor failure
OTHER
Acoustic NoiseLess than 40dB
Warranty periodOne year (for free) from the date of B/L. Free product accessories will be sent to you and save your maintain cost
ApplicationOffice equipment, test equipment, medical equipment, industrial automation equipment, household appliance,lighting system, communication system, etc

Servo stabilizer.

Technical Specification Chart:

Parameter
1 - Phase
2 - Phase

3 - Phase
Unbalanced
Air Cooled

3 - Phase
Balanced
Oil Cooled

3 - Phase
Unbalanced
Oil Cooled

Energy
Conserved
Lighting Load

Centralized
Stabilizer for
offices &
residence

Rating (KVA)
1 - 20
0.5 - 20
3 - 100
3 - 200
3 - 250
3 - 500
3 - 500

I/P Voltage
range (V)

170 - 270
195 - 265

340 - 480

240 - 480
340 - 480
360 - 460

310 - 480
340 - 460
360 - 460

340 - 480
360 - 460

310 - 480
340 - 480
360 - 460

310 - 480
340 - 480
360 - 460

O/P Voltage
(normal)
230 V

415 V

415 V

415 V

415 V

208 V LN

220 V / 230 V
LN

Alternate
O/P setting
220 V /
240 V

380 V / 400 LL

220 V LN

220 V / 230 V
LN

O/P V
regulation

± 1% of nominal output voltage

O/P V
Indications

Digital voltmeter, accuracy 1% of FS ± 1 digit

LED
Indications

Front panel LED Indicators, Input ON, output ON, Input high / Low, output High / Low trip

Under over
voltage trip

Electronic cutoff circuit with graded time delay set @ + 5% / -10% of nominal voltage

Over Load
cut off

Electronic cutoff circuit with graded time delay set @ 110% of rated full load current

Short circuit
protection

HRC fuse / MCB at input

Single phasing
prevention

Not applicable

Provide

Individual phase cutoff only

Service
bypass

Not provided

Provide upto 100 Kva. 3 phase

Individual phase bypass
provided up to 50 kVA 3-ph

Resetting
mode

Automatic restart with time delay mode of 15 sec. (optional).

Technical Specification Chart
Parameter 1 - Phase 2 - Phase 3 - Phase
Unbalanced
Air Cooled 3 - Phase
Balanced
Oil Cooled 3 - Phase
Unbalanced
Oil Cooled Energy
Conserved
Lighting Load Centralized
Stabilizer for offices & residence
Rating (KVA) 1 - 20 0.5 - 20 3 - 100 3 - 200 3 - 250 3 - 500 3 - 500
I/P Voltage range (V) 170 - 270
195 - 265 340 - 480 240 - 480
340 - 480
360 - 460 310 - 480
340 - 460
360 - 460 340 - 480
360 - 460 310 - 480
340 - 480
360 - 460 310 - 480
340 - 480
360 - 460
O/P Voltage(normal) 230 V 415 V 415 V 415 V 415 V 208 V LN 220 V / 230 V
LN
Alternate
O/P setting 220 V /
240 V 380 V / 400 LL 220 V LN 220 V / 230 V
LN
O/P V regulation ¦ 1% of nominal output voltage
O/P V Indications Digital voltmeter, accuracy 1% of FS ¦ 1 digit
LED Indications Front panel LED Indicators, Input ON, output ON, Input high / Low, output High / Low trip
Under over voltage trip Electronic cutoff circuit with graded time delay set @ + 5% / -10% of nominal voltage
Over Load cut off Electronic cutoff circuit with graded time delay set @ 110% of rated full load current
Short circuit protection HRC fuse / MCB at input
Single phasing
prevention Not applicable Provide Individual phase cut off only
Service bypass Not provided Provide upto 100 Kva. 3 phase Individual phase bypass provided upto 50 kVA 3-ph
Resetting mode Automatic restart with time delay mode of 15 sec. (optional)

Stabilizers : 10 kva to 3000 kva capacity, 3 - phase, 50 hz.
For different industrial applications.
Input voltage range : 300 to 500 volts or as per
Customers requirement
Output voltage : 380/ 400/415 + 1% or specific
Automatic voltage controller the following advantages can be achieved.
- reduction in failure rate of electrical equipment upto 60%.
Energy saving 5 - 10%.
Improvement in power factor and reduction in mdi.
Uniform quality of end product.
Better efficiency in plant.
Depreciation @80% as per income tax act( in india only )


Depends upron capacity

Properties white to light yellow powder , high gloss , low odor , good discoloration resistant , smoke inhibiting , easy incorporation and dispersion .
Application it 15 widely used in pvc plate , sheet and articles to improve the blow moldability , extrudability and calenderability in production and the service life of finished product . Its properties are superior to those of organic tin series heat stabilizer , but its cost is lower .



Pe bag with lined pe film

Feature
1. Available for wide range input volage, steady output voltage
2. Input pre-charge circuit
3. Led indicates the working status
4. Smd technology, four-sided, extra strong copper-plated printed circuit board (4x70|¡¡ì¬)
5. High frequency switched power supply, efficiency>95%
6. Low temperature rise
7. Unique filter design
8. Low electromagnetic radiation
9. Smart protect circuits against overheating, over and under input/output voltage




3kg/piece, 310x200x45mm

PRODUCT DESCRIPTION
___________________________________________
Ice cream stabilizer is a compound ingredient including food emulsifiers and stabilizers. All the ingredients are based on raw materials of non-animal origin.

USAGE INFORMATION
____________________________________________
The dosage is 0.5%
Mix the milk, sugar and others materials with emulsifying stabilizer as the ratio, dissolved with water, stirring and heating. Then, heat to 75-80â?? and hold 20-30 minutes. And then homogenized, put them into the aging cylinder for 2-3 hours, then, adjust the color and odor.
LEGAL DECLARATION
_______________________________________________
Ice cream stabilizer
INGREDIENT LIST

Food emulsifier
E471 25%
E491 10%
E322 13%
Guar gum( E412) 22%
Carrageenan ( E407) 13%
Sodium alginate(E401) 10%
Xanthan gum(E415) 7%

APPEARANCE
Yellow powder
FOOD CONTAMINANT
Raw materials are guaranteed food grade in conformity with the applicable legislation on:

Heavy metals
ARSENIC (As) (mg/kg) â?¤ 3
MERCURY (Hg) (mg/kg) â?¤1
CADMIUM (Cd) (mg/kg) â?¤ 1
HEAVY METALS (as Pb) (mg/kg) â?¤ 10


INDICATIVE MICROBIOLOGICAL VALUES
TOTAL PLATE COUNT (CFU/g) â?¤ 1000
YEAST AND MOULD (CFU/g) â?¤ 100
COLIFORMS ABSENT IN 0.1g
SALMONELLA ABSENT IN 25g

What Is Servo Voltage Stabilizer

The Servo voltage stabilizer maintains the quantity of voltage in the power system, even in the case of voltage fluctuations. The control element basically converts the unregulated input to the regulated output.

GENERAL SPECIFICATION

The product range offered by us is inclusive of Servo Stabilizers, Electronics Plating Rectifiers and Electronics Rectifiers. Their longer serving life, compact design, less power consumption, easy operation and low working cost, makes these machines highly appreciated among our patrons. The offered range finds wide applications in various commercial, industrial and household applications. Offered by us at industry leading prices, these electronic and allied machines and equipment are highly appreciated among our patrons. We are Best manufacturer of Servo Voltage Stabilizer and Rectifier.

Rating: Up to 5000 KVA

Feature

1) There is high speed chip controller as brain behind the control board, 20x4 LCD to display instantaneous electrical parameter

2) Self teaching type Front panel for parameter setting

3) Smart and Intelligent to control overload based system

4) User settable Output voltage Upper and Lower voltage cutoff based on output set value

5) There is Individual message for each fault.

6) Single board for control and conditioning

7) For alarm On board buzzer

8) User settable Buzzer control

9) Very simple for wiring and maintenance

10) Fault history storage facility and can store No. of faults

11) System ON/OFF control through Front panel soft key for maintenance

12) Three phase separately can be controlled independently through single board In analog type servo voltage Regulator, it requires separate digital meter and overload facility is normally not provided All the settings are provided as factory setting, users have very less option to set.

Advantages & Benefits

1) Higher reliability and performance, easy for user

2) Easy to change output parameter as per customer need

3) System will not allow more than system power rating

4) Load will be always safe from the output over voltage

5) Very Easy to find out unhealthy status of servo or load. User can take preventive action based on this indication.

6) User will get buzzer for all kinds of faults to recognize system status without visualizing

7) Reduced wiring will increase reliability in the system, lesser probability of failure malfunction.

8) Very good feature of Digital controller, user will always be aware with load pe Conditioning. User himself can take preventive actions. This will reduce time to

9) This will provide correct information of how much maximum voltage and load c sustained by the System. From this preventive action can be taken for the load.