Closure Stock

One of the largest integrated primary producer of aluminium in Asia. With a pan-Indian presence that encompasses the entire gamut of operations, from bauxite mining, alumina refining, aluminium smelting to downstream rolling, extrusions and recycling, Hindalco enjoys a leadership position in aluminium and downstream value-added products in India.

Our Indian aluminium operations are integrated and consist of bauxite mining, alumina refining, smelting and converting primary metal into value-added products. We have dedicated sources for critical raw materials such as bauxite, power and coal. We also have committed supply sources for auxiliary chemicals.

Our finished products include alumina, primary aluminium in the form of ingots, billets and wire rods, value-added products such as rolled products, extrusions and foils. Metallurgical alumina is used for our own captive needs. Chemical alumina and hydrates are used in range of industries including water treatment, fillers in cables and plastics, refractories and ceramics, glass among others.

Our facilities are in regions close to raw material sources, low cost and available labour and demand markets. This helps in reducing costs and improving profit margins. The technology upgrade has resulted in higher utilisation rates at our plants and improved efficiency.

We believe implementation of superior technology not only reduces costs but also provides superior and customised products, thus, improving our sales.

Hindalcoâ??s integrated complex at Renukoot, in Uttar Pradesh, India, houses an alumina refinery, an aluminium smelter and facilities for the production of semi-fabricated products. Power is sourced from our Renusagar power plant, located about 45km from Renukoot. Our facilities also include an aluminium smelter and an aluminium FRP facility (for rolled products, extrusions products and wire rods) at Hirakud (Odisha) with a captive power plant and coal mine, and alumina refinery at Muri (Jharkhand). Our Chemical grade alumina plant is located at Belagavi (Karnataka), and rolling mills at Belur (West Bengal), Taloja near Mumbai and Mouda near Nagpur (Maharashtra). Foil rolling facility is situated at Mouda near Nagpur (Maharashtra) and our extrusion plant at Alupuram (Kerala).

Hindalco's new age smelters at Aditya (Odisha) and Mahan (Madhya Pradesh), operating on state-of-the-art AP36 technology, have not only resulted in expansion of our capacities but also improved cost-efficiency of our operations. These smelters have their own captive power plants and source alumina from Utkal, our 100% subsidiary.

Utkal Alumina (Odisha) is a world class refinery with one of the lowest cost structure in the world. The bauxite for Utkal is sourced from Baphlimali mines by a 18 kilometer long conveyor, one of its kind in the world.

Aluminium is used extensively in the transport industry due to its high strength to weight ratio and its excellent impact absorption qualities. Western countries use an average of 140kg of aluminium per vehicle, whereas it stands at 40kg per vehicle in India.

Hindalco's high-quality aluminium is preferred for its superior alloy composition and metallurgical properties that meet stringent performance parameters. Our expertise is backed by the superior Wagstaff AirSlip casting technology. From brakes to ignition, transmission to suspension, cooling and exhaust systems to windows and structurals, ornamentals to accessories, automobile heat exchangers and registration plates, Hindalcoâ??s superior aluminium material is for making the most precise automobile components.

Aluminium is used extensively in the transport industry due to its high strength to weight ratio and its excellent impact absorption qualities. Western countries use an average of 140kg of aluminium per vehicle, whereas it stands at 40kg per vehicle in India.

Hindalcoâ??s high-quality aluminium is preferred for its superior alloy composition and metallurgical properties that meet stringent performance parameters. Our expertise is backed by the superior Wagstaff AirSlip casting technology. From brakes to ignition, transmission to suspension, cooling and exhaust systems to windows and structurals, ornamentals to accessories, automobile heat exchangers and registration plates, Hindalco's superior aluminium material is for making the most precise automobile components.

Hindalco brands:


Maxloaderâ?¢ is an all-aluminium truck body made of extruded profiles from Hindalco.
Maxloader truck bodies are lighter, more environment friendly and fuel efficient

Everlast, a Hindalco brand, launched in December 2002, is made of aluminium and is ideal for all roofing and cladding needs. It is easy to use, durable and economical to work with. Using aluminium for roofing has many benefits. Some of them are the following:

Aluminium roofing sheets are extremely light and have a high strength-to-weight ratio.
Aluminium is an increasingly popular choice for use in installations and buildings. It is corrosion-resistant in almost any kind of environment. Even in highly corrosive industrial environments, it is resistant to fumes and vapours of organic compounds and to chemicals like ammonia, carbon dioxide and acids such as hydrochloric acid, nitric acid and sulphuric acid. Such corrosion resistance gives the metal a long life and keeps it looking good throughout its life.
The shine and brightness of aluminium livens its surroundings, and, because it doesn't stain, discolour or rot, it keeps its brightness and shine for a long time. Aluminium corrugated sheets can take a variety of finishes, colours and textures, which protect them and further enhance their appearance.
An aluminium structure can be easily dismantled, transported and re-assembled in a new location.
Though the metal is a good conductor of heat, its high reflectivity for radiant heat and light (75 to 80 per cent when new, 60 per cent after several years) keeps the interiors of aluminium building from five to eight degrees celsius cooler in summer, while its low emission rate cuts heat loss in winter.

It is easy to maintain and wash

Other typical properties
Circular corrugated sheet 0.30 - 1.22 mm
Industrial troughed sheets 0.40 - 1.63mm
Curvomatic troughed sheets 0.40 - 1.22mm

Width
Hindalco's aluminium sheets are available in the following widths (unit mm):
Troughed Overall Effective
Ind. 6 795 750
Ind. 7 920 875
Ind. 8 1044 1000
Circular corrugated Overall Effective
10/3 800 750
16/3 1250 1200
12/3 950 900
Length
Between 1500 to 6500 mm. Other lengths may be provided on request.

Young's Modulus
Young's Modulus or modulus of elasticity for aluminium is 7.0x104 mpa.

Finish
Everlast is available in mill and stucco finish. Colour-coated sheets can be provided on request.

Curvomatic and tiled profile sheets are offered.

Workability
Everlast can be bent to the required shape. It is subject to the bend radii of the alloy.

Applications
Cladding for roofs and walls
Industrial buildings, warehouses, aircraft hangers
Indoor and outdoor stadiums
Insulation and protection of fuel storage tanks and industrial boilers
Wall panels for high-rise buildings
Residential roofing
Roof-on-roof roofing
Exhibition pavilions
Poultry farms
False ceilings

By meeting stringent specifications of globally competitive companies, Hindalco's flat fin stock has proved its worth in air conditioners, car radiators and heat exchangers. With the help of high-quality ingots, state-of-the-art gauge and shape control and precision slitting, we manufacture fin stock that has tight gauge tolerances and excellent slit edges. A tight build-up combined with internal sound metallurgical properties produce good drawability required for all types of finning

Packing

Hindalco's flat fin stock is packed on wooden skids in either eye-to-sky or eye-to-wall condition, wrapped in HDPE fabric and hardboard and strapped with hoop iron. Moisture protection is ensured with silica gel packets and as the final step, the entire packed product is placed in a wooden cage.

Applications :
Air conditioners
Car radiators
Automobile heat exchangers

As one of India's largest producers of flat rolled products, Hindalco's aluminum sheet is produced from its own cast slabs or continuous cast coils, rolled down to customized thickness, gauge and tolerances. Our hot rolled plates are durable and deliver long lasting performance.

Stretched plates
Thickness limit 6 - 12 mm
Length limit 2000 -4000 mm
Applications :
Electrical busbars and ducting
Tanks
Ships, boats (corrosion-resistant and weldable plates)
Defence and industrial uses (strong alloy plates)
Aircrafts

Hindalco meets global standards in the manufacture of its cable wrap stock, which is widely used in various cable brands.

With the help of high-quality ingots and state-of-the-art control systems, Hindalco manufactures cablewrap stock with tighter gauge tolerances and meets excellent elongation and length requirements

Dimensions
Alloy (AA) : 1200 and 8011

Temper: 0, H18

Thickness range (mm) : 0.17- 0.20

Width (mm) : 720-1220

Coil i.d. (mm) : 203, 300 and 508

Thickness tolerance : +/- 0.01 mm

Length : Equivalent to 2 km or multiples

Applications:
Telecom cables

Hindalco's cold rolled coils are precision-finished to match international standards. They have good shape, high tolerance, versatility and blemish-free surfaces. They are used in commercial and general engineering applications such as bus bodies, cladding and fan blades. The company meets the demands of its ever-growing clientele with continuous upgrades and process improvement.

Applicable standards
ASTM - B -209M, Aluminium association aluminium standards and data, Hindalco manufacturing limits (as applicable).

Packing

The coils are packed in eye-to-sky or eye-to-wall positions, wrapped in HDPE and hardboard, strapped with hoop iron and placed on wooden pallets. Moisture protection is provided by silica gel packets.

Applications :
Bus cabins and bodies
Insulation
Cladding in buildings, aluminium composite panels, false ceilings and panelling (plain or colour-coated coils)
Electrical busbar ducting, flexibles, transformer strips, etc