High quality decorative alkyd enamel for use as topcoat on alkyd primers or undercoat. PROPERTIES Colour : Aluminium Solids : 40% Theoretical Coverage 10 â??12 m2/lit @ 25u DFT DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: 24 hours Vehicle type: Modified alkyd Specific gravity: 1.0 +/- 2% Flash point: 38�°C
Description A heat resistance durable coating based on synthetic resin .An excellent top coat for application for primed steel structures to withstand against atmospheric corrosion. Uses on tank exteriors, Reaction vessels, structures, pipelines, exhaust system & areas exposed to dry heat attached. Unique Features & Benefits Excellent durability Heat resistance coating, Resistance up to 2500-3000c Ease of Application Super silky and Eggshell finish Excellent flow characteristics to form smooth and uniform finish Excellent coverage Good corrosion Resistance Good weather and water resistance
Aluminium Paint Heat Resistant 600c
Heat Resistant Aluminium Paint 400c
Single Pack Heat Resistance Aluminium Paint Based On Silicone Resin. Hr Aluminium Paint Film With Stand Up To 250 C. It Gives Silver Like Finish And Brilliant Lusture To The Surface . Good Water And Heat Resistance
High Quality Heat Resistance Paint Based On Pure Silicone Resin Excellent Coverage And Hiding Excellent Corrosion Resistance
Easy To Apply Single Pack Superior Durability Excellent Gloss Retention SCOPE USES Kisomin Aluminium Paint is a modified Synthetic Resin based enamel. It provides high Light fastner and brightness with excellent orientation finish. it has good adhesion on interior or Exterior surfaces. Recommended as a decorative finish coat & can be applied on surfaces like Grill, Windows, Cabinets & wide range Metal Structures. FEATURES/ BENEFITS * Smooth durable finish. * Smooth flow & easy to apply. * Excellent coverage & hiding. * Superior surface protection KEY ATTRIBUTES * Application temperatures : 10-44 degc VISCOSITY FOR APPLICATION * For Brushing 40"-45" at 30C * For Spraying 18" 20" at 30C * For Roller 55"-60" at 30C SURFACE PREPARATION APPLICATION BRUSH CONVENTIONAL SPRAY NOTES : HEALTH & SAFETY Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign particles. System of Coating should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before application of paint, thin down to achieve desired viscosity & filter through white cloth. Apply Kisomin Paint to finish. Stir the base thoroughly and then mix to uniform consistency. Apply by diluted material, where viscosity has to be ensure 40-45 sec by f.c. B4 Add Kisomin thinner to adjust viscosity depending on spray condition. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm. 1. Use off the mixed paint . 2. Do not apply when temperature falls below 10c or rises above 50c and when relative humidity rises above 90%. Do not apply during rain, fog or mist 3. Brushes and spray equipment should be cleaned with Thinner, 4. Special care to be taken to close immediately the partly used Diluted Material. Please refer to the separate Material Safety Data Sheet available with detailed information
Supplier: Aluminum powder
Supplier: Gold bronze powder, aluminium powder, aluminium paste and gold paints
Buyer: Ammonium Chloride
