Silicone resin ingredient ensures painted films to stand integrated after exposed at 300degree for a long period of time.
Be sure to stand much higher temperature, to 600degree.
Widely used on films which will work with high temperature.
It is humidity resistant, waterproof and weather resistant.
Be sure not mix it with gasoline.
Theaoson water-based spray paint is composed of aerosol cans, aerosol valves, paint and spray agent. It is widely used in the following fields: repairing paint defects, molds, industrial machinery, buildings, steel structures, advertising, marking, graffiti and so on.
Features
1.Fast drying
2.Colorful and easy to use
3.Full paint film and high gloss
4.Strong adhesion
Application
It is suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions
we supply
1,colour matching of 2k,1k base coat and pearl,silver,primer,putty,clear coat,hardener
the fully series from 1st to the top coat for automotive paint
2,additionally,we can also supply Enamels NC paint for industrial usag
3,with decades of experience our matching team
can provide you the best price and result.
We are looking for car refinish distributors,
pls join us to get the mutual benefits!
Heat resiting paint
Based on heat resistant silicone resin medium with aluminum pigment for protection of steel at high temperature up to 650°c
Gives brilliant lustre with excellent weather resisting properties.
Colour:
Aluminum
Solids:
48± 2
Coverage:
9-10 sq mts. / ltr/coat
Drying time:
Dust free in 4-5 hours recoat after 24 hours or heatinh at 225 for 1 hour.
Flash point:
Above 30° c
Recommended dry film thickness:
15 to 20 microns
Method of application:
Brush/spray
Thinner
P-73
Storage life:
6 month
Surface preparation:
Mild steel surface
Requires wire brushing or acid pickling to get an absolutely clean metal surface free from rest.
Precaution:
Not to be used in areas of high acidity or alkalinity
Does not cure and remains soft until temperature reaches 200°c
At the time of application metal must be at room temperature
Avoid applying thick coat since that may cause blistering.
Uses:
In industry for painting chimney stocks, exhaust sustems
Anti corrosive paint
Based on epoxy modified phenolic having good resistance to solvents, water, saline atmosphere, resistance to mild acids, alkali and chemicals. It is suitable for pipelines structures inside chemical factories, under frames of railway coaches, frames of lorries and buses, jetties, marine installations, barrage gates
Colour:
Selected colours
Viscosity:
80 +/- 10 in ford cup b-4
Solids:
45 +/- 2
Coverage:
9-10 sq mts. / ltr/coat
Drying time:
Surface dry 4-6 hr.
Hard dry:
32 -48 hr.
Full curing in:
7-8 days
Flash point :
Above 30 c
Recommended dry film thickness:
15 to 20 microns
Method of application:
Brush/dip/ spray
Thinner:
P-71
Cross cut adhesion:
Passes
Bend test 1/2":
Passes
Resistance to salt spray test:
Passes 150 hr. Test
Surface preparation mild steel surface:
Requires wire brushing or acid pickling followed by phosphating. After surface preparation polyvar-rop - 701 is applied for best results
For marine application & chemical atmosphere
Polycoat -rop 801 epoxy primer can be used.
