Synplast Rough Texture Coatings Durable Coating For Exterior High Rise Walls, Super Resistant To Salinity, Extreme Weather Conditions And Anti Carbonation.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in:
Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel)
Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years
Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades
Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries
Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes
Product is available in 20kg packing
FEATURES
Excellent Gloss & Gloss retention, excellent color / non yellowing characteristics
High viscosity, medium Tg and high molecular weight / good drying and forms hard and moderately
flexible film
Excellent pigment wet ability and good resistance to detergents and soaps.
APPLICATIONS
As a decorative and quick drying paints. Industrial quality quick drying paints / as acrylic topcoat for
textured paints. Road marking paints / for pavements / kerb stones / pathways.
clear lacquers for PVC leather cloth / over lacquering and Metallizing / coatings for electronic equipment like TV / video and similar items. Scratch resistant protective coats and polycarbonate glazing.
CHARACTERISTICS
Type of Resin A composition of solution polymerization
Solvent Xylene
Solids 60 +/- 1%
Viscosity(Gardner Tube @25o
C) Z2 - Z4
Acid Value < 10 mg KOH
Color (Gardner) Water white (0.1 max in Gardner)
Clarity Clear
COMPATIBILITY DATA
Long Oil / Medium Oil / Styrenated Alkyd Incompatible
polyols Limited
Cellulose esters Good
Chlorinated rubber Good
Vinyl resin Good
SOLUBILITY DATA
Hydrocarbons Xylene / Toluene: Soluble
Mineral Spirits Limited
Alcohols Soluble
Esters Soluble
Ketones Limited
Long Oil / Medium Oil / Styrenated Alkyd Incompatible
DELIVERY FORM DETAILS (50% XYLENE)
Packing: 190 Kgs / net: 200 Lit Mild Steel Drums
SHELF LIFE
Minimum 12 months when stored under ambient storage conditions.
