Industrial Syn. Enamel Paint (All Shades)

HI - Performance Syn. Enamel Paint
Superior Durability Color Pigment System
Easy To Apply By Brush , Roller And Spray

PRODUCT PARAMETERS
1. Type : Single Pack
2. Composite : Modified Oil Based Resin with Finest Bright
Pigments, Hydrocarbon solvent and addives
3. Use Recommended Thinner to make
Applicaon Viscosity
4. Applicaon Tools : Brushing, Spraying or
Roller
5. Flash off = 30 Minutes
6. Drying Time :
Surface Dry : 4 Hours
Hard Dry : Overnight
7. Curing Time : 72 hours
8. Over coang Interval : MIN : Overnight
MAX : 5 Days
9. Color : Assorted Shades
. Finish :
10 Smooth Finish
11 Thinner / Cleaner KISOMIN THINNER
12. Shelf Life: Up to 12 Months as long as the sealed containers
are kept under cover in a dry place under normal
temperature.

SCOPE
USES
Kisomin durable synthec enamel are long lasng & solvent based
paint used for wide range of surface.
Recommended as a decorave finish coat & can be applied on
surfaces like Metal, Cement Brickwork, Asbestos Grills and Wooden
surfaces like doors, Windows, Cabinets & wide range of furniture

FEATURES/ BENEFITS
* Smooth durable finish.
* Smooth flow & easy to apply.
* Excellent coverage & hiding.
* Superior surface protecon.

KEY ATTRIBUTES
* Applicaon temperatures : 10-44 degc

PERFORMANCE PROPERTY
Chemical Resistance
A Exposures Splash & Mild Fumes/Outdoor
Spillage Resistance
cid + +
Alkalis + +
Solvent NA NA
Salt ++ ++
Water +++ +++
Flexibility +++
Adhesion +++

Excellent : +++
Very Good : ++
Good : +

SURFACE PREPARATION
APPLICATION
BRUSH
CONVENTIONAL SPRAY
NOTES :
HEALTH & SAFETY
Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign parcles. System of
Coang should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the
surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before applicaon of paint, thin down to achieve
desired viscosity & filter through white cloth. Apply Kisomin Paint to finish.
Sr the base thoroughly and then mix to uniform consistency.
Apply without thinning
Add Kisomin thinner to adjust viscosity depending on spray condion. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm�².
1. Use off the mixed paint .
2. Do not apply when temperature falls below 10 C or rises above 50�°c and when relave humidity rises above 90%. Do not apply during rain, fog or mist
3. Brushes and spray equipment should be cleaned with Thinner,
4. Special care to be taken to close immediately the partly used Diluted Material.
Please refer to the separate Material Safety Data Sheet available with detailed information