Raj Electric And General Store

Description: These beautiful Vietnamese silk lanterns are a wonderful way to decorate a room, home, hotel, event or restaurant and add an Asian atmosphere to any setting. They are made by hand from finely woven silk and bamboo using techniques invented long ago. They collapse into a tube for easy shipping and convenient storage. Simply pull up on the metal wire to expand the lantern into its shape. Additionally, each silk lantern comes with a convenient bracket mounted on top for easy hanging. We guarantee that you will love your lantern. By tradition, on the 14th day of each lunar month, the residents of Hoi An celebrate the Lantern Festival by turning off all the electric lights to allow thousands of these beautiful colored lanterns to glow throughout the town, adorning their porches and windows. They are an extremely important and beautiful cultural craft from Vietnam, which prides itself in beautiful silk and bamboo art works.

Corn ethanol /alcohol plant /production line
welcome all friends all over the world !
Fuel /medical /food ethanol /alcohol process machine,ethanol/alcohol production line/process line ,ethanol /alcohol equipment ,ethanol/alcohol distillation machine ,ethanol /alcohol turnkey project
1. It is a turn key whole set equipment, simple equipment, less worker, less area, less cost.
2. Can produce 1000L-1000000L 96%-99.9% alcohol(ethanol) per day.
3. Can use Corn, wheat, cassava, molasses, rice, potato, date, beetroot, sugar cane ect which contains starch or sugar material.
4. We can do the turn key system or section part.
5. Can improve and rebuild old alcohol(ethanol) production line.

Sugar Fuel /medical /food ethanol /alcohol process machine,ethanol/alcohol production line/process line ,ethanol /alcohol equipment machinery,ethanol/alcohol distillation machine ,ethanol /alcohol turnkey project

1. It is a turn key whole set equipment, simple equipment, less worker, less area, less cost.
2. Can produce 1000L-1000000L 96%-99.9% alcohol(ethanol) per day.
3. Can use Corn, wheat, cassava, molasses, rice, potato, date, beetroot, sugar cane ect which contains starch or sugar material.
4. We can do the turn key system or section part.
5. Can improve and rebuild old alcohol(ethanol) production line.

You can choose single distill tower to save money, also can choose 5 distill column to get good quality alcohol(ethanol).
DDGS; Distillers Dried Grains with Solubles.
We make many kinds alcohol equipments. Medical ethanol ,fuel ethanol and DDGS high protein feed Complete equipment ,medical ethanol in China, being regarded as national high-tech enterprise, star enterprise, standing commissioner of the National Alcohol Association, national demonstration unit of both quality and credibility assurance, national enterprise in designing and manufacturing class-I, class-II, class-III pressure vessel. We are capable to design, manufacture, install and adjust 1500t-500000t alcohol complete equipment on alcohol producing equipment and DDGS complete equipment, winning the National Science & Technology Progress Award many times. We are the first choice of clients at home and abroad. Material of alcohol equipment is corn, tapioca, potato, and other amyloid plants; Sirup, sugarcane, sugary jowar. We can also design for you according to your requirements.
We have a lot of commercial partners in Europe, America and Southeast Asia because of our advanced technology and reliability and reasonable price
Alcohol equipment, ethanol equipment, fuel ethanol equipment, dehydration alcohol ethanol equipment
Distillation columns.

* PHOSCAST
Phoscast : Phosphate Bonded Castables

* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.

BACKGROUND

* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.

* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion

* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.

APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.

GAIPL is modern enterprise which produces and sells complete sets of power equipment and accessories ,1T/h-660T/h boiler parts and accessories.With the advantages of scientific research,mass production,professional technical consultation,timely delivery and installation maintenance,our products are sold all over the world.We have provided quality and affordable products for thousands of power plants,thermal power stations and heating companies, such as Chemical plant,Textile plant,Food & Beverage,Garment manufacturing,Paper Plant,Printing and dyeing mill,Cement Plant,Fertilizer plant,Feed mills,Rubber factory.Schools,Hotel,Bath Center,Swimming Pool,Hospital,Hotel,etc.In INDIA & Also EXPORTS to many countries ,we enjoy a high reputation.We provide various kinds of boiler fittings,such as economizer,membrane water wall,super heater ,air pre-heater,boiler drum, boiler header,water cooled jacket,center cylinder,super-heater bracket,super-heater clamp,tube shield,boiler nozzle,expansion joint pipe,coal feeder,grate bar,tube bend etc.Meanwhile,boiler improvement technical consultation,OEM and ODM is also accepted.

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites.

Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature.
Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts.

PREPARATION OF FURANE MORTAR :
Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life.
Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.

Cyclone Dust Collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dustand other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air purifiers, which use disposable filters to remove dust.
Multiple-cyclone separators consist of a number of small-diameter cyclones, operating in parallel and having a common gas inlet and outlet, as shown in the figure, and operate on the same principle as single cyclone separatorsâ??creating an outer downward vortex and an ascending inner vortex.

Multiple-cyclone separators remove more dust than single cyclone separators because the individual cyclones have a greater length and smaller diameter. The longer length provides longer residence time while the smaller diameter creates greater centrifugal force. These two factors result in better separation of dust particulates. The pressure drop of multiple-cyclone separators collectors is higher than that of single-cyclone separators, requiring more energy to clean the same amount of air. A single-chamber cyclone separator of the same volume is more economical, but doesn't remove as much dust.

Cyclone separators are found in all types of power and industrial applications, including pulp and paper plants, cement plants, steel mills, petroleum coke plants, metallurgical plants, saw mills and other kinds of facilities that process dust.

APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.

Omniscient International, an ISO & CE certified manufacturer, produces Long Life Brush Holders for Industrial Use, engineered for durability and consistent performance in demanding environments. Manufactured from high-quality brass or stainless steel, with a golden or silver metallic finish, these brush holders are designed to maintain stable brush contact, reduce wear, and extend service intervals. They offer excellent resistance to heat, vibration, and corrosion, making them ideal for motors, generators, pumps, and heavy-duty machinery used in industries like manufacturing, mining, and power generation. Available in standard and custom sizes, with options for spring tension and terminal configuration as per OEM requirements.

Omniscient International, an ISO & CE certified manufacturer, supplies Standard Size Brush Holders designed for reliable performance across a wide range of motors and generators. Manufactured using high-quality brass or stainless steel, with a golden or silver metallic finish, these holders ensure stable brush alignment, uniform pressure, and efficient current transfer. Suitable for AC/DC motors, industrial pumps, generators, and compressors, our standard brush holders are available in commonly used dimensions and mounting types. We also provide quick customization based on client specifications or machine models.