10/100/1000BASE-T Copper SFP Fiber Optic Transceiver
We supply brand-new fiber optic transceivers 100% compatible with most switches like Cisco, 3COM, HP, Foundry, Nortel, D-Link, Extreme, Juniper, Finisar, etc, and have got the ISO9001-2000, UL, TUV, CE, FDA, FCC, RoHS and REACH certificates to ensure the quality of products. Please contact us to get detail data sheet.
Features
1. Compact RJ-45 connector assembly, up to 1.25G bi-directional data links
2. Hot-pluggable SFP MSA footprint, RoHS, IEEE802.3, Bellcore TA-NWT-000983 compliant
3. Support intelligent auto-negotiation 1000 BASE-T operation in host systems with SERDES interface
4. 10/100/1000Mbps compliant in host systems with SGMII interface
5. Access to physical layer IC via 2-wire serial bus, +3.3/5V single power supply, lead Free
6. Low power dissipation (1.05 W typical), metal enclosure for lower EMI
7. Commercial operating temperature range: 0
8. Warranty: 3 years; 100% tested, samples available
9. OEM/ ODM available, products and labels customized
Applications
1. Gigabit Ethernet, Fiber Channel, GPON, EPON, Point-to-Point, SONET/SDH Network
2. Switches/ Bridges/ Routers/ Servers, OADM, FTTD (Fiber-to-the-desktop)
3. Telecommunication and fiber optic data transmission networks
4. Wide Area Networks (WAN), Local Area Network (LAN), CCTV, CATV Network
Custom Products
CFP-40G, CFP-100G, QSFP+ 40G, QSFP+ 100G
10Gbps SFP+, DWDM SFP+, CWDM SFP+, BiDi WDM SFP+, SFP+ loopback
10Gbps XFP, DWDM XFP, CWDM XFP, BiDi WDM XFP, XFP loopback
CSFP, CSFF, CSFP loopback
SFP, BiDi SFP, Multirate DWDM SFP
CWDM SFP, CWDM SFF, CWDM 1x9, CWDM GBIC
Multirate SFP, Multi-rate WDM SFP
10G PON
GPON SFP, ONU SFF, ONU SFP, ONU SFP
GEPON SFP, ONU SFF, ONU SFP, ONU SFP
3G/HD SDI video SFP, SD SDI video SFP
GBIC, WDM GBIC
1x9, SFF 2x5, SFF 2x10 modules
TOSA, ROSA, BOSA
RJ transceivers
Transceivers with any level of customization
100% CISCO CWDM-SFP10G-1470 COMPATIBLE SFP TRANSCEIVER:Compatible for Cisco CWDM-SFP10G-1470, wavelength: 1470nm, the transmission distance up to 40km.
TECHNICAL SPECS: 10Gb/s data rate, duplex LC connector, cable type: SMF, working temperature: -5 ~ +70, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): -15.8.
EASY TO USE : Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Always keep the protective dust plug on the SFPâ??s optical bores until you are ready to make a connection. MiniGBIC module with DDM allows you to monitor the critical information, to find out some potential problems.
PREMIUM QUALITY: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure the compatibility. Hot-swappable in Cisco routers and switches
OUTSTANDING SUPPORT: Backed by QSFPTEK Store for the life of the module itself, not your equipment; our modules won't void your switchs, with access to our tech support
With the adequate production capacity and total quality management,a wide variety of CWDM SFP transceivers and CWDM xfp transceivers are available with different rates (1.25G and 2.5G ) and transmission distance(from 40km to 120km). Details about one modle of ATOP's CWDM SFP transceiver here.
Product features
Up to 1.25Gb/s bi-directional data links
Hot-pluggable SFP footprint
Uncooled DFB laser transmitter in 8 possible CWDM wavelengths
Duplex LC connector
RoHS compliant and Lead Free
Up to 80 km on 9/125
Metal enclosure for lower EMI
Single 3.3V power supply
Low power dissipation <600mW
Commercial operating temperature range: 0centigrade to 70 centigrade
General
ATOP's AP-SCxx125-3CxLxx CWDM Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE STD 802.3 and 1x Fibre Channel as defined in FC-PI-2 Rev. 10.0 .They are RoHS compliant and lead-free.
Compliant with iec 60825-1 class 1/cdrhclass i laser eye safe
Rohs compliant products available
Applications:
Switch to switch interface
Switched backplane applications
Router/server interface
Other optical transmission systems
Description:
Atop ag-5524-bz8 transceiver is a high performance, cost effective module supporting dual data-rate of 1.25gbps/1.0625gbps and 80km transmission distance on smf. It is fully compatible with gigabit interface converter (gbic) specification (sff-8053), rev5.5. It can be inserted in or removed from host chassis without shutting power of the host system. It uses 1550 nm dfb laser for lr-2 applications, cwdm is also available.
Standards:
Compatible with gbic specification (sff-8053), rev 5.5
Compatible with ieee 802.3z
Compatible with ansi specifications for fibre channel
Compatible with fda 21 cfr 1040.10 and 1040.11, class
Features
- Compliant with SFF-8431 SFP+ MSA
- Compliant with IEEE802.3ae 10G BASE-LW/LR
- 1310nm DFB transmitter
- PIN photo-detector
- 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
- All-metal housing for superior EMI performance
- Low power consumption
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
- RoHS Compliant
Applications
- High-speed storage area networks
- Computer cluster cross-connect
- Custom high-speed data pipes
Features
- Compliant with SFF-8431 SFP+ MSA
- Compliant with IEEE802.3ae 10G BASE-SW/SR
- 850nm VCSEL transmitter
- PIN photo-detector
- 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
- All-metal housing for superior EMI performance
- Low power consumption
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
- RoHS Compliant
Applications
- High-speed storage area networks
- Computer cluster cross-connect
- Custom high-speed data pipes
- Inter Rack Connection
1490nm cwdm dfb laser and pin photodetector for 80km transmission
Compliant with sfp msa and cwdm-sfp-1490 with duplex lc receptacle
Digital diagnostic monitoring:
Internal calibration or external calibration
Compatible with rohs
+3.3v single power supply
Operating case temperature:
Standard : 0 to +70+¼pc
Industrial : -40 to +85+¼pc
Applications
Gigabit ethernet
Fiber channel
Switch to switch interface
Switched backplane applications
Outer/server interface
Other optical transmission systems
Description
The sfp transceivers are high performance, cost effective modules supporting dual data-rate of 1.25gbps and 80km transmission distance with smf.
The transceiver consists of three sections: a cwdm dfb laser transmitter, a pin photodiode integrated with a trans-impedance preamplifier (tia) and mcu control unit. All modules satisfy class i laser safety requirements.
The transceivers are compatible with sfp single-source agreement (msa) .
Features
- Compliant with SFP+ MSA
- Compliant with SFP MSA (INF-8074i)
- Support for multi-gigabit data rates up to 10.5Gbps
- Support for 1x, 2x, 4x and 8x Fiber Channel data rates
- Hot Pluggable SFP 20PIN footprint
- Serial ID module on MOD(0-2)
- AC coupling of PECL signals
- EMI/EMC performance
- Low Power consumption
The cisco coarse wavelength-division multiplexing (cwdm) small form-factor pluggable (sfp) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy gigabit ethernet in their networks. The product set helps enable the flexible design of highly available, multiservice networks.
The cisco cwdm sfp solution is a convenient and cost-effective solution for the adoption of gigabit ethernet and fibre channel in campus, data-center, and metropolitan-area access networks.
Arrange shippment on the receipt of payment
Ship via fedex, dhl, ems and so on
Expert package
