Advantage Feature:
More heat-collecting: whole glass vacuum tube;
Good heat preservation:thinken polyurethane layer,professional forth technics,completef froth,improve the design of water outlet,improve the heat preservation of tank;
Low cost:It doesnt consume groovy energy,no pollution,cost once but benefit long;
Easy install:Joint ostium adapts especial technology,no leakage,easy install;
Long lifetime:inner and outside shell are made of SUS304 stainless steel,and its life time is more than15 years;
Complete specification:ordinary model,slope model,project model,there are about three series and more than forty kinds for you;
More choose:We follow clientsdemand to choose relevant inclosure to extend the function of solar water heater;
Good service:You can contain dealer in your place anytime if there is something wrong in your products bought in our company, and you also can contain our company direct. With reassurance to buy and comfortable to use.
Perfect part:
Vacuum tube-
It adopts advanced a new technology named 12 layer spurt plating. It choose super hard borax and silica glass, and selective absorb coat through gradual change A1-N/A1,so that the tube has high-powered absorptance and low reflectance. It through interlayer vacuum has inimitable heat preservation effect, its radiation is strong and the temperature can be to 270;
Heat preservation shell of tank-
It adopts West Germany import polyurethane forth technics, the foam is thin,uniformity, the density is rational and close rate is high. Its heat preservation shell is 50cm, so its heat preservation effect is better;
Outside water tank-
It choose import good SUS304 BA food grade stainless steel, which looks beautiful and decent;
Inner shell
It choose import good SUS304 BA food grade stainless steel, with high frequency jointing technic,so the welding line is in the bottom of tank, so the hot water producted is health and sanitary can be drunk;
Cover of top tank-
Pressing molding with wale avoid fake. It adopts thinken stainless steel, which has longer lifetime than plastic cover of top tank;
Airproof and dustproof winding-
All of them adopts silicon rubber as material, which has better qulity and longer lifetime;
Frame-
It adopts stainless steel frame,and the whole combination avoids the lose in the transportation.
Extra large heat capacity and more water to satisfy the needs concerning bath and other hot water requirements.
The support is designed with an overall industrial model, which is simple, direct and stable.
The 2.1m extra long high temperature pipe with special effect has the patent of interferential film technology, thus increasing the heat collection performance by 12% compared to normal pipes and bearing more stable performance.
The equipment has extra thick and extra strong heat preservation layer and the fully automatic constant-temperature and high-pressure quantitative foam. The heat preservation performance is endurable and steady.
Solar E control equipment is adopted together with VFD display and control facilities to realize the automation and intelligence of hot water supply.
Packing by carton: water tank and frame in one carton; vacuum tube is lacked in one carton
Integrated solar water heater series.
The tube with special effect has the patent of interferential film technology, thus increasing the heat collection performance is better compared to normal tubes and more stable.
Optional:
Standard tube;
3-hi tube;
Diameter: 47mm/58mm
Length:1500mm/1800mm/2000mm/2200mm
The support is designed with an overall industrial model, which is simple, direct and stable.
Optional:
Stainless steel material;
Aluminum alloy material
Supplier From
Anyang,
South Korea (Republic Of Korea)
Supplier: Alkaline water ionizer, filter, water dispenser, carbon block filter, water treatment, home appliance, small electronics, kitchenware, electronics, water purifier, electric water purifier, electric water dispenser, hydrigen water Services: Logistics, shipping, consulting on alkaline water treatment
Data
Model NO. : EPDM3000
Material: NBR + PVC
Size: 1330*3000mm
Qty Per 20ft Container: 230
Hardness: 65 ±5
Net Weight: 2.86Kgs/
Weight after fill in water: 4.61Kgs/
Tensile Strength: 6.0 250 Mpa
Elasticity: 70%
Skylight compact pressurized solar water heater takes advantage of the vacuum tubes which has the property of high absorptivity and low emissivity, and transfer swiftly the heat absorbed to the water by heat pipe inside the vacuum tubes.This kind of solar water heater can operate efficiently from summer to winter, and afraid not the frost cleft of the vacuum tubes.
1. Uni-directional heat transmission
2. Can start from lower temperature
3. Faster transmission
4. Lower heat capacity
5. Low temperature resistance
6. Freeze-proofing
7. High frequency soldering inner tank
8. Rating pressure is 0.6mpaú¼0.4mpa separately, can connect directly with the city water system
9. No water in the vacuum tubes eradicates the incrustation scale, thus keeping them running in high efficiency,
10. No water in the vacuum tubes eradicates the leakage due to the aging of silica gel gasket or broken of the tubes,
Feature
Inner tank: Food Grade Stainless Steel by argon protect welding, supply water quality and drinkable
Outer shell: Galvanized Steel coated uncorrosion layer
Heat insulation layer: 50-60mm import polyurethane integral foaming
Frame: Galvanized Steel coated uncorrsion layer, both install inclined and flat roof.
High Pressure Cold Water In: 6 bar cold water to tank from Feeder or Electric Auto Valve.
Automatic Heating Element free
1% spare parts are free
All install documents are free
Specification
Tank capacity (L): 100L-300L
Tube specification (Diameter x Length) (mm):
47 x 1500, 58 x 1800
Tube quantity: 18-36
Tube vacuum degree: 5 x 10-3
Tube absorption >0.88
Tube heat loss <0.08
Tube heat transfer power: 26000Kw/m2
Working pressure (MPa); 0.6
Anti freeze(C): -40
Anti ice drops (Diameter mm): 30
Reflector Area (Made by Alum alloy) (m2): 3.4
Anti-wind support frame: 26.5m/s 10 grade
Material of outer tank: steel coated with AL & Zn
Insulation (mm): polyurethane 55mm
Heat element (fitted in the water tank): 1100W/220V/50Hz
Working principle:
* The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts.
* When the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically.
* The circulation pump makes heat-conducting liquid circulate automatically.
* The heat-conducting liquid transfers heat to water by heat exchanger in the water tank.
* In case the temperature of the water tank does not reach T-max, then start the auxiliary heating device.
* If discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically.
Features:
* Collector separates with the storage tank. The tank can be put anywhere of the house.
* Module design, arbitrary combination, harmony with the building perfectly.
* Intelligent control and automatic operation.
* Anti-freeze: No water inside the tubes when it works.
* The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.
Key specifications:
* Heat-collection tube: High borosilicate3.3 glass with copper pipe
* Inner tank: With enamel layer (2.0mm)
* Outer tank: Colored steel: 0.5mm
* End Cover of Tank: Colored steel (0.5mm)
* Frame: Stainless steel 301
* The material of insulation: Polyurethane Foaming 50mm
* Electrical Heater: High grade tube with dry-heating safeguard (1.5kw-3kw, 220v, 50Hz)
* Safety Valve: Brass valve (1/2")
* Controller: Circulation pump, Joints and other valves
* The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts.
* When the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically.
* The circulation pump makes heat-conducting liquid circulate automatically.
* The heat-conducting liquid transfers heat to water by heat exchanger in the water tank.
* In case the temperature of the water tank does not reach T-max, then start the auxiliary heating device.
* If discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically.
Features:
* Collector separates with the storage tank. The tank can be put anywhere of the house.
* Module design, arbitrary combination, harmony with the building perfectly.
* Intelligent control and automatic operation.
* Anti-freeze: No water inside the tubes when it works.
* The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.
Key specifications:
* Heat-collection tube: High borosilicate3.3 glass with copper pipe
* Inner tank: With enamel layer (2.0mm)
* Outer tank: Colored steel: 0.5mm
* End Cover of Tank: Colored steel (0.5mm)
* Frame: Stainless steel 301
* The material of insulation: Polyurethane Foaming 50mm
* Electrical Heater: High grade tube with dry-heating safeguard (1.5kw-3kw, 220v, 50Hz)
* Safety Valve: Brass valve (1/2")
* Controller: Circulation pump, Joints and other valves
