Spraying molybdenum wire used as a thin coating on the surface of automobile components subjected to wear, such as piston rings, gearbox synchromesh parts, selector forks, etc.
Molybdenum wire is also sprayed onto machine parts such as bearing for repair purposes.
Materials: pure molybdenum, Mo>99. 95% , impurities <0. 05% , each element content <0. 01%
Properties:
1. The weight of single wire is up to 18-25kg without any welded joint, which results in enhancing the efficiency and decreasing the operating costs.
2. Diameter: 3. 175mm, 2. 3mm-1. 41mm
3. Tolerance: 3. 175mm + / -0. 025mm or + 0 / -0. 05mm
2. 3mm-1. 45mm + / -0. 02mm + 0 / -0. 05mm
4. Tensile strength: >700-900N / mm2
5. Elongation: >5%
China Manufacturer with main products:tungsten crucible ,tungsten rod ,tungsten plate/sheet ,tungsten tube ,tungsten heating elements ,tungsten wire ,molybdenum crucible ,molybdenum rod ,molybdenum plate/sheet ,molybdenum tube ,molybdenum electrode ,alloy products
brand:W3101 W3102 W34 W1 W2
Content: W3 W34 W2: W>=99.929%
Character and usage
W3101:twist wire; it has good character in high temperature and endurance.Second crystal temperature >=1950C,mainly used as filament wire in halogen,high temperature color filament,twist filament,white filament and fluorescence filament.
W3102: it has good character in roll and high temperature.Second crystal temperature >=1850C,mainly used in white filament wire,vacuum tube heating wire.
W34: used in twist wire
W1/W2:used as frame of vacuum tube,heating elements.
Super thin white tungsten wire.
Specs :3-14 um
Usage : electronic watch, electronic computer,mini-bulb and other precision equipment manufacture.
We can supply black wire,polish white wire,and rectify white according to customers' requirement .
Tungsten wire is used as vacumme material.
Tungsten filament is applied as evaporator(heating element)in the vacuum metalizing
Twisted tungsten wires are made of selected high quality material of tungsten,with the properties of excellent thermal conductivity,finely processed,and long duration.
Usually twisted tungsten filament are used as evaporator (heating element) in the vacuum metalllizing(evaporation) process to coat thin film on surface of mirrors,kinescope,toys,home appliance,machine and various decoration,etc.
Grade:JT88
Diameter:ª¦0.55--2.0mm
Number of strands:1--10 (strands).
We can produce the products according to the customers'drawing or sample.
Attached labels indicate detailed production information
Reeled on spools, Pack in cartons or cases or according to customers' requirements
Our tungsten wire processed from tungsten rod of toshiba is quite suitable to be made into strand tungsten filaments for vacuum metalizing or various lamps filament.
1. Tungsten wire tungsten Filament: tungsten wire in spool
Model NO.: KK
Type: Tungsten Wire
Material: W-1
Purity: 99.95%Min.
Melting Point: 3410 Ceiclus
Boiling Point: 5927 Ceiclus
Density: 19.2g/cm3
Diameter: 0.01-2.00mm
Surface: Black and Cleaned
Export Markets: Global
2. Dimensions and Tolerances of tungsten wire:
Tungsten wires diameters are generally expressed in terms of inches or mils (thousandths of an inch). For thin wires from. 001 inches up to. 020 inches in diameter, the diameter of the wire is measured by weight per unit length. That is, the weight expressed in mg of a 200 mm length of wire.
The standard diameter tolerance is: � 3% of the weight measurement. Closer tolerances are available, depending upon the application for the wire product.
Specification:
Diameter, mm Difference between 2 feet, mm Inside diameter tolerance, mm
Big heater element Small heater element
0.4-3.0 1 0.3
0.4-1.0 1 0.3
0.4-1.3 1 0.3
0.4-1.0 2 1 0.3
0.4-1.0 1 0.3
0.4-1.0 several stranded coils 0.3
Note: Different diameter and length are available for your 99.95% pure stranded tungsten wire.
3. Straightness of tungsten wire:
Wire may be finished in the unstraightened or as drawn condition and is controlled to Bango's internal standards, In addition, wire can be straightened via mechanical or heat treating processes. Typically, the measure of the straightness of a tungsten wire is obtained by cutting a ten inch long piece of wire and allowing it to lie on a flat clean surface. The maximum deviation from a straight line along its length is the quantitative measure of its straightness. In general, as the degree of straightness increases, tensile strength decreases.
4. Quality and Finish:
Wire is free of scratches, kinks and distortions insofar as they are harmful to the intended end use of the product. Surface finish is supplied in the black, as drawn condition, where drawing lubricants and oxides are retained on the surface, or in the cleaned condition by firing in hydrogen or electrochemical etching.
5. Products Feature:
1. Excellent Conductivity
2. Resistance of high temperature.
3. Abrasion and Erosion.
4. Suitable for making heating wires.
5. Twisted wires for coating films under vacuum and for tungsten wires in electrical light sources usage.
We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol
