Product Specification
Material - MS
Tray Type - Ladder Type Cable Tray
Sheet Thickness - 1.5mm
Brand - Rukmani
Surface Finishing - Zinc Coated
Standard Lengths Of - 2.5m
Corrosion Resistance - Yes
Country of Origin - Made in India
Rung Spacing - 250mm
Product Description
Our company is engaged in offering robust built Ladder Type Cable Trays that are made from the finest mild steel. This is used in various industries for distribution of power throughout the premises. These cables have uniform distance between them and consist of two longitudinal side rails or rungs, which are welded to the side rails or bolted in some cases.
The insulated centipede type ladder is named after shaped like a centipede,the characteristics are that this ladder is based on the straight rod as the center pillar, and the main mechanical load and insulating
strength are carried with the insulated stretching rope,The parallel settings of the insulated crossbar are used as a ladder to run through the rod,they are mainly carry the weight of climbing staff.Compared with the ascending method of conventional live operations, the insulated centipede type ladder can adapt to a variety of terrain operations,it can solve the problems that the power-based operating vehicles and machinery cannot enter the operating area caused by inconvenient road traffic, such as the fields area, hillside area, grass area,etc.This ladder is not highly required for the geographical conditions of the operation site. The weight of this ladder is light, easy to carry, convenient operation.Itâ??s expand the new way to board the power operation.
The feature of the productï¼?
1. The trunk is made of high-strength epoxy weaving and pulling insulated tube. It has good insulated performance, high strength, good rigidity and small offset under load.
2. The ladder pedal can be made of circular insulated tube or Reuleaux triangle insulated tube, good insulated performance, high mechanical strength, Reuleaux triangle insulated tube foot stepping on the contact surface, comfortable feet when climbing.
3. Insulated wind rope adopts insulated nylon rope or insulated silk rope, with good insulated performance and high stretch strength.
4. The structure design of the insulated centipede ladder is a segmented plug-in locking type, with a mounting base at the lower end to fix the rod body. Each section of the structure about 3M, and the foot pedal is fixed. It is equipped with a waterproof and moisture-proof insulated bag, which is easy to carry.
5. This ladder can be equipped with insulated work platform, and staff can stand on the insulated work platform to work, which greatly improves the comfort of the operation.
6. The main insulated tube is yellow, and the ladder pedaling tube is fluorescent green or yellow.
Noteï¼?1.The insulated centipede type ladder provide with the insulated nylon rope as
the standard wind rope. If the insulated silk rope is required, please explain when
purchasing.
2.Insulated centipede ladder standard does not include insulated working platform, if
you need insulated working platform, please specify at the time of purchase.
Insulated Ladders are very safe for very high electrical and mechanical performance. Our products are Made of FRP material, high hardness, good impact resistance, strong load bearing capacity and good insulation. Use epoxy resin, use high temperature polymerization to draw, high strength, corrosion resistance, beautiful appearance, good insulation.
Main material
Frame : Foam filled fiberglass tube in orange or yellow.
Step: Foam filled fiberglass tube in orange or yellow
Strengthen Bar: Foam filled fiberglass tube in orange or yellow.
Hook or other Joint accessories: Stainless steel
Moving wheel: High strength metal + Nylon
Rope: Insulation Nylon rope.
Character:
Dielectrical Test: 30kV
Insulation Between Rungs:30kV
Anti Slip of Step
High Mechanical resistant to bending and twist
High Resistant to bad weather and corrosion element
Technical Detail:
Applied Standard:GB17620 & EN131
The ladder can be designed according to customer's requirement.
Note:
5.1 Please inspect the ladder main body and parts according to GB17620 or EN 131 before use it ,If there is any defects or crack ,Please donot use it.
52 Please follow the ladder and live line work operation regulation when use it.
5.3 Please protect the ladder avoid the damage and moisture which will affect the insulation level.
5.4 Please inspect the ladder every year regularly to guarantee the ladder in well condition.
6.Product assembly method:
Standard assembly, according to customer's request, in bulk.
MEA Step metal ladder kit. An innovation that makes many aspects of your life easier. The ladder is stable with steel railings made of several segments that make simple transport by truck possible, and on-site ensures a quick and easy installation without any other drilling operations or further processing. The ladder is weatherproof, robust and stable for many possibilities of use both indoors and outdoors, delivered with the already appreciated MEASTEP XSL steps.
MEASTEP XSL Metal Ladder Kit: Stability with Flexibility
The MEASTEP XSL Type 1 metal ladder kit offers a complete solution for easy assembly and safe use. The kit includes railings (one or both sides), MEASTEP XSL steps, and all necessary accessories. The steel components are hot-dip galvanized, ensuring excellent corrosion protection. No drilling is required due to pre-drilled elongated holes. Available step widths range from 600 mm to 1600 mm with 30/30 mm and 30/10 mm mesh options.
Key advantages:
Easy, fast assembly with no extra processing.
Optimized transportation.
Load compliance with DIN standards.
Heights up to 5.98m, adjustable inclination from 35�° to 55�°.
Content:
Quantity: 1, Left platform connection element, 0.700 kg
Quantity: 1, Right platform connection element, 0.700 kg
Quantity: 1, Left leg element, 0.600 kg
Quantity: 1, Right leg element, 0.600 kg
Quantity: 6, Round filling bars 10 mm / 2400 mm, 1.597 kg
Quantity: 4, Railing support post, 2.865 kg
Quantity: 4, Railing post fixing plate, 0.560 kg
Quantity: 4, Railing collar (handrail), 0.140 kg
Quantity: 24, Filling bar support, 0.020 kg
Quantity: 1, Handrail tube 2400 mm, 6.550 kg
Quantity: 2, Railing end piece, 0.350 kg
Quantity: 1, Left vang, 18.380 kg
Quantity: 1, Right vang, 18.380 kg
The staircase can have between 27 and 35 steps, depending on the angle of inclination and the height of the step.
