Jinan Ruby Laser Technology Co., Ltd.

General type 40W60W80W MYJG CO2 laser power supply myjg-40/60/80watt laser power source 1. Product Features: It has green color control signal terminal board 1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with CO2 laser tube made by any factories. 2. This laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation. 3. The laser output power can be adjusted by 0-5V analog signal or PWM signal. 4. This laser power supply has open cirsuit protection function. When protective earthing is good, the laser power supply can be in open circuit status during short time. This function can protect power supply when laser tube burst. 2. Aging test: Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qulified. 3. Specification: Item MYJG-40 MYJG-60 MYJG-80 MYJG-100 MYJG-130 MYJG-150 30KV 35KV 45KV 50KV 50KV 50KV 20mA 23mA 30mA 30mA 35mA 38mA Input AC Voltage AC220V or AC110V Input DC Voltage DC 300V or DC150V Input AC Frequency 47-440Hz Efficiency 91% Over Current Protection 130% of Max. Current Open Circuit Protection Yes (For short time) Cooling Fan Cooling Voltage Range of High Level Control Not Less Than3V Voltage Range of Low Level Control Not More Than0.8V Working Temperature -30 - +65 Degree Centigrade Humidity 20-85%RH(No Dew) Withstand Voltage Input-Output AC1500V/MinNot More Than10mA Input-Shell AC1500V/MinNot More Than10mA Output-Shell Connected Insulation Not Less Than 50MOHM(DC500V) Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V) Shock Resistance Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours MTBF Not Less Than30,000hours Full Load 60 Degree Centigrade test 12Hours 7 Seconds Start/Stop Test 500 Times Dimension(LXWXH)171mmx161mmx91mm Note Power supply warranty:12 months. Delivery time:2 working days after payment received. Package:Carton,foam and wooden box. Shipping method:DHL,UPS,Fedex or TNT Payment method: T/T,PAYPAL,Western Union Application:General type power supply and widely used on 40W-150W CO2 laser engraving machine.or cutting machine

BR-60W CO2 POWER SUPPLIES Feature 1.Both analog signals of 0 to 5V and PWM signals are used� to control and regulate this AC110V CO2 power supplyâ??s output laser power. 2.This AC110V CO2 power supply� can adopts� ether external LCD digital display module by network cable,which can show� HV carbon dioxid power supplyâ??s working current,working statues and failure code.�  It is very good function for both machine factory and machine users 3.This BR-60W CO2 power supply uses ordinary H/L/P/G/IN/5V terminal block� to input� laser control signal and black� steel case. 4.This LCD screen CO2� power supply� has� high efficiency and� quick� response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand 60W co2 laser tube.�  5.This 60W CO2� laser power supply� terminal control is simple and adapted to high and low level signals. TTL 1level can be used to control the start and stop of laser� power. At the same time, an abnormal protection switch was added to detect if� the external water is ventilated or not. 6.The HV carbon dioxide power supply use one PCS fan for cooling. It use Japanâ??s bearing and make the fan works for very long time. 6.This HV carbon dioxide� power supply� has good grounding protection5.With advanced open circuit protection, the� 60W CO2 power supply� can work in an open-circuit state for a short time, which can avoid the damage of the LCD screen CO2 power supply� caused by the bursting of the laser tube. Specification lnput�  Input voltage AC220V�±10%� (AC110V specified while order) AC frequency 47~440HZ Maximum input power 490W Maximum input current 2.2A Output Maximum output voltage 25KV Maximum output current 28mA (depending� on the laser tubes of different manufacturers) Efficiency More than 90%� (Full load) Response speed Not more than 1ms Control lnterace TTL multilevel switching control,effective level can be high and low selection (see control wining diagram) Insulation lnput-output AC 1500V 1 minutes not more than 10mA lnput-shell AC 1500V 1 minutes not more than10mA Output-shell Connection Open Circuit Protection Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc) Environmental Requested Working temperature -10â??~50â?? Storage of temperature -20â??~75â?? Relative Humidity Maximum 85%RH (non-condensing) Altitude 100,000 feet of work 200,000 feet of storage,dose not work Cooling methods Forced air cooling (fan cooling) Dimensions (LxWxH) 210mmx145mmx102mm

6040 co2 laser engraving machine 40w 4060 co2 laser engraver Features This machine adopts imported linear guide and dsp system control software. The machine has stable performance and applicable for different industries. It is the ideal choice for non-metal processing industry. Dy-13 Reci Co2 Laser Power Supply for 1400mm RECI W4 100watt CO2 laser tube Features: 1.This� DY 13� laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with RECI W4 100W CO2 laser tube. 2.This� 100watt� laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation. 3.The laser output power� of this DY13 CO2 power supply� can be adjusted by 0-5V analog signal or PWM signal. 4.This� DY-13 CO2� laser power supply has open circuit protection function. When protective earthing is good, the laser power supplycan be in open circuit status during short time. This function can protect power supply when laser tube burst. 5.Aging test:Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified. 6. This DY-13 100W CO2 laser power supply uses ordinary H/L/P/G/IN/5V interface as laser control signal and it uses blue aluminum case. Specification: Input AC Voltage AC220V or AC110V Input DC Voltage DC 300V or DC150V Input AC Frequency 47-440Hz Max. Output Voltage 40KV Max. Output Current 28mA(Depends on Laser tube) Efficiency 91% Over Current Protection 130% of Max. Current Open circuitProtection Yes (For short time) Cooling Fan Cooling Voltage Range of High Level Control Not Less Than3V Voltage Range of Low Level Control Not More Than0.8V Working Temperature -30 - +65 Degree Centigrade Humidity 20-85%RH(No Dew) �  Withstand Voltage Input-Output AC1500V/MinNot More Than10mA Input-Shell AC1500V/MinNot More Than10mA Output-Shell Connected Insulation Not Less Than 50MOHM(DC500V) Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V) Shock Resistance Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours MTBF Not Less Than30,000hours Full Load 60 Degree Centigrade test 12Hours 7 Seconds Start/Stop Test 500 Times Dimension(LXWXH) 270x160x80mm

Dy-10/dy-13/dy-20 80/100/150w laser power supply for reci 1200/1400/1650/1850mm co2 tube Dy-10:80w co2 laser power supply for reci s2 80-90w co2 tube Dy-13:100w co2 laser power supply for reci s4 1000w co2 tube Dy-20:150w co2 laser power supply for reci s6 or s8 130-150w co2 tube 1. Product features: 1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with co2 laser tube made by any factories. 2. This laser power supply is easy to be controlled, it is suitable to high or low level signal. The ttl level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation. 3. The laser output power can be adjusted by 0-5v analog signal or pwm signal. 4. This laser power supply has open circuit protection function. When protective earthing is good, the laser power supply can be in open circuit status during short time. This function canprotec power supply when laser tube burst. 2. Aging test: Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified. 3. Specification: Model nody-10dy-13dy-20 Output laser power80-90w100w130-150w Input ac voltageac220v or ac110v

ZR-40W CO2 laser power supply Feature 1.Easy Control: The start and stop of laser power can be easily controlled by TTL level� on this 40W laser power supply. And it has� protection switch to test the external water, ventilation, etc. 2.The 40w laser power supply adds a new function, that is timely scene judging which part is damaged� on� laser tube or laser power� supply. 3.Application: Acrylic sculpture, cut; Fabric sculpture, cut; Rubber sheet sculpture, cut, etc. 4.Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power� on this40watt laser power supply. 5. This 40watt CO2 power supply has fast response speed and effect. 6.This 40 watt CO2 power supply has an aluminum alloy housing and a dedicated interface for the stamp engraving machine: K+/K -/D+/D -/G/IN/5. In addition, it also has; DC24V/5V output 7.� The� CO2 laser� power supply� has� feedback interface which can be used in closed-loop control and testing the working current of laser. 8.Because of many protect function, this 40W laser power source� dramatically lengthen the lifetime of� glass type CO2 tube. 9.� The� 40Watt CO2� power supply has open circuit protection: Under the condition of good protective earth, the power supply can work in open-circuit for a short time, which could avoid the damage to� laser power supply. 10. This ZR-40W CO2 laser power supply adopts K+/K-/D+/D-/G/IN/5V as control signal output interface and uses blue aluminum case. 11.Good compatibility: This 40W CO2 laser power supply can be applicable to most brands of 30Watt, 40Watt, 50Watt CO2� laser tube� made by different factories. Specification: Item 40W laser power supply Input Input voltage AC110/220V� �±10% AC frequency 47-440Hz Max input power 350W Max� input current 3A Output Max� output voltage DC25KV Max output current DC20mA(it depends on different brand 40watt CO2 laser tube) Efficiency More than 90%(full load) MTBF More� than 10000 hours Response speed 1ms(Time is from TTL.Signal is given to the output current up to 90% of pre-setting current) Withstand voltage Input-output,input-enclosure, AC1500V,10mA 60S, Output cathode is connected with enclosure. Environment Operation temperature(-10-40 degree celsius), related humidity s less than 90% Cooling Force air cooling Environment related Working temperature -20â??---50â?? Storage temperature -10â??---75â?? Related humidity Max 85^ RH(non-condensing) Cooling method Force air cooling(FAC) Altitude 100000feet of work,200000 feel of storage,no work. Cooling method Air force cooling(Fan cooling) Dimension LxWxH=165X144X80mm Weight 1.18KG

Dear Buyer/Importir, This laser, which is a professional manufacture specialize in fiber laser, CO2 laser cutting machine since 2004. will attend a lot of exhibitions this year, we are very glad to introduce you to buy the exhibition machines EXHIBITION MACHIEN WILL ENJOY: FREE SHIPPING + FREE INSTALLTION AND TRAINING Here are the time details, if you have interest, please kindly Fiber Laser Machine/CO2 Laser Machine/Laser Welding Machine/Laser Marking Machine/Laser Cleaning Machine Fiber Laser Machine/CO2 Laser Machine/Laser Welding Machine/Laser Marking Machine/Laser Cleaning Machine

This co2 laser cutting machine can use for engraving and cutting nonmetal materials. Applicable Materials Glass, organic glass, leather, cloth, acrylic, wood, MDF, PVC, plywood, maple leaf, double-color sheet, bamboo, Plexiglas, paper, leather, marble, ceramics etc. nonmetal materials. Applicable Industries Advertisement, arts and crafts, leather, toys, garments, model, building upholstery, computerized embroidery and clipping, packaging and paper industry. Our Services Rather careful and professional packing way for machine protection. 1 - Film. Put PE film on the machine and some spare parts, then put bubble wrap to the machine. 2 - Free-fumigation wooden case with steel tube support on wooden cover. The humidity-proof paper above the wooden plate. This kind of package could protect the machine very well from dust and humidity etc.

CO2 laser cutting engraving machine is a CNC laser machine that uses CO2 laser to engrave and cut wood, MDF, plywood, chipboard, dieboard, cardborad, acrylic, fabric, jeans, plastic, leather, paper, ABS, EPM, PE, PES, PUR, PVB, PVC, PUR, , PTFE and thin metals. Controller Ruida RDC6445G Software Interface Ruida Rdworks v8 or LightBurn 2021 Software Format Support CorelDraw, Photoshop, AutoCAD, etc Graphic Format Support AI, PLT, BMP, DXF, DST, T100, etc