VFLOOR2 are two component waterproof Self Leveling Mortar. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings. Suitable for prepairing interior floors prior to laying parquet, vinyl sheet and tile, soft floor covering, natural stone, ceramic tiles, etcâ?¦
It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement and sand screeds, terrazzo, asphalt, ceramic & quarry tiles.
Layer-thickness 2-10mm
Can be pumped
Product name: Self leveling concrete without primer VFLOOR2
Compressive strength: >35 Mpa, 28 days later
Flexural strength: >7 Mpa, 28 days later
Application
Temperature: 5-30 degree
Mixing ratio: 20kgs powder + 5kgs Liquid
Feature & Benefits:
- Two component, just mix A+B
- Waterproofing
- Good adhesion to primed substrates
- Good flow, self smoothing
- Rapid setting and early strength
- Easy and quick to lay
Mixing:
Convenient easy mix ratio A:B = 4:1 by mass. Mix slowly and continuously to form a homogeneous mixture.
The mixed materials is immediately ready to use and should be used within 30-40 minutes after mixing.
Ready for foot traffic after approx. 24 hours.
Drying time:
Prevent draughts across the floor to avoid localized premature drying
At ambient temperature, VFLOOR2 will appear to be dry after approximately 24 hours, ready for foot traffic after approx. 24 hours.
Floor laying may commence after 48 hours.
Coverage:
At an application thickness of 2mm the coverage will be approx. 5kgs per 1m2
Shelf Life: 9 months.