ADI ChemTech Cat NO - ADI-GM-2188 Product Name - Zinc Phosphate USP/ BP/ FCC/ Cosmetic
Packing - 25 kgs
Common zinc phosphate White powder Purity: 80-90 Po4%: 20-30 The ph value: 6-7 Residue on sieve ( 45um): max 0.5% Moisture: max1% High purity zinc phosphate White powder Purity: 85-90 Po4%: 40-46 The ph value: 5-7 Residue on sieve ( 45um): max 0.4% Moisture: max1% Low heavy metal zinc phosphate White powder Purity: 95min Po4%: 43-47 The ph value: 5-7 Residue on sieve ( 45um): max 0.5% Moisture: max0.8% 25kgs/composite paper bag, 1mt/pallet, 20-22mts/20' fcl 10 days after payment
Zinc content %: MIN 45% 25 kg per bag 1000 kg per pallet
1.property: Zinc phosphate is a new type of nontoxic and harmless white antirust pigment with excellent performance in rust prevention and ideal application effect. It is the best substitute of conventional antirust pigments containing heavy metals such as lead and chrome. 2.Usage: Zinc phosphate is widely used in various coating materials for preparation of waterproof, acid-resistant or corrosion preventive coating materials such as phenolic paint, epoxy paint, acrylic paint, paste paint and water-soluble resin paint in the fields of shipbuilding, automobile, industrial machinery, light metal, household appliances and metal containers for foods. 3.Specifications:The technical specifications are as follows in conformance to Standard Q/84XS01-2004. in composite paper bags25kg each,20MT/FCL' with pallet.
Synthetic Zinc Phosphate Primer
Bags Bags, 5*5*1, 1kg
1.Usage:High-purity zinc phosphate is widely used in various coating materials for preparation of waterproof, acid-resistant or corrosion preventive coating materials such as phenolic paint, epoxy paint, acrylic paint, paste paint and water-soluble resin paint in the fields of shipbuilding, automobile, industrial machinery, light metal, household appliances and metal containers for foods. In composite paper bags25kg each,20MT/FCL' with pallet.
Zinc phosphating chemicals.
Epoxy Zinc Phosphate Primer White (A+B)
Product Use In 1. Anticorrosive Paint 2. Coatings 3. Powder Coatings 4.Paint
We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
Zinc & Manganese Phosphating
Description Two component Epoxy based anti corrosive primer pigmented with Zinc Chromate as corrosion inhibiting pigments. Recommended Use :- It is recommended as primer on M.S surface for original equipment manufacturing as well as for process industry as in various fertilizer, refineries, petrochemical, chemical and other plants, applied in diverse areas of tank exteriors, equipments, pipelines, structural steel, etc. Not to be used for immersion application. Physical Data COLOUR : Assorted FINISH : Matt SOLIDS BY VOLUME : 40 ± 3% THEORETICAL SPREADING RATE : 13.33 sq.mt. / ltr. at recommended DFT of 30 �µ FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C DRYING CHARACTERISTICS : SURFACE DRY : 60 90 minutes (At 65% Relative Humidity & at 30�°C) : HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application. Application Data MIXING RATIO : Base : Hardener (As per our recommendations) APPLICATION : By Brush / By Conventional Spray THINNER : Epoxy thinner 190 POT LIFE : 4 hours min at 30 C RECOMMENDED DFT : 30 - 40 au. OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be over coated with Epoxy, PU, Chlorinated rubber and Oleo-resinous topcoats. Application Method Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add Epoxy Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the paint through Nylon filter cloth of 100 mesh size and apply uniformly over the surface. All equipments used for above should be properly cleaned. Application :- By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application, however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in criss-cross manner and ensure the uniform application. Use quality brushes for paint application For Conventional Spray application :- Thinner : Epoxy Thinner 190 Addition : 10-15% Nozzle Orifice : 1.2 -1.4 mm Nozzle Pressure : 40-70 psi For Airless Spray application :- Thinner : Epoxy Thinner 190 Addition : 10-15% Addition : Max 5% if required Nozzle Orifice : 0.37- 0.42mm Nozzle Pressure : 1400-1800 psi
Description Two component Epoxy based anticorrosive primer containing red oxide and zinc phosphate as corrosion inhibiting pigments Recommended Use :- This product is recommended as a primer on suitably cleaned mild steel surface in various fertilizer units, refineries, chemical and other plants, transportation industries, steel plants, cement plants, power plants, pulp and paper industries, pharmaceutical industries, etc. for application on tank exteriors, structural steel, pipelines, machineries, vessels, etc. The product is recommended as a primer for mild to moderate corrosion conditions. Not to be recommended for immersed water condition. Physical Data :- COLOUR : Red FINISH : Matt SOLIDS BY VOLUME : 40 ± 3% THEORETICAL SPREADING RATE : 13.33 sq.mt. / ltr. at DFT of 30 �µ FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C DRYING CHARACTERISTICS (At 300 C & 65% Relative Humidity) : HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendations) APPLICATION : By Brush / By Conventional Spray THINNER : Epoxy Thinner 190 POT LIFE : 4 hours min at 30C RECOMMENDED DFT : 30 - 40 OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be over coated with Epoxy, PU, Chlorinated Rubber and Synthetic Enamel Finish Paints. Application Method Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix, gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Application : By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application; however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in crossed manner, ensuring the uniform application. Use quality brushes for paint application. Add Epoxy Thinner Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the paint through Nylon filter cloth and apply uniformly over the surface. All equipments used for above should be properly clean. For Conventional Spray application :- Thinner : Epoxy Thinner 190 Addition : 10-15% Nozzle Orifice : 1.2 -1.4 mm Nozzle Pressure : 40-70 p.s.i. For Airless Spray application :- Thinner : Epoxy Thinner 190 Addition : Max 5% if required Nozzle Orifice : 0.37- 0.42mm Nozzle Pressure : 1400-1800 p.s.i.
Description Two component Epoxy based anti corrosive primer containing zinc phosphate as corrosion inhibiting pigments Recommended Use :- It is an ideal primer where faster turnaround of equipment is desired, Hence making it ideal primer for industrial and Infrastructure equipments, heavy machineries etc exposed to medium corrosive and marine environment. It is also recommended for steel structures in Chemical, Fertilizers, Petrochemical and industrial plants. Not to be used for immersion application. Physical Data :- COLOUR : Grey, Yellow, Beige, Red oxide FINISH : Egg Shell SOLIDS BY VOLUME : 48 ± 3% (Depends on shade) THEORETICAL SPREADING RATE : sq.mt / lit at recommended DFT of 30 µ FLASH POINT : Base : Above 23C Hardener : Above 23C DRYING CHARACTERISTICS (At 65% Relative Humidity & at 30C) : DRY TO HANDLE: 3 hr's max FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendations) APPLICATION : By Brush / By Conventional Spray THINNER : Epoxy Thinner 190 POT LIFE : 4 hours min at 30C RECOMMENDED DFT : 30 - 40 µ. OVERCOATING INTERVAL : MIN : 2 hours MAX : 24 hours COMPATIBILITY : Can be over coated with Epoxy, PU, Chlorinated rubber and Oleo-resinous Top coats.
We offer a wide plethora of Zinc in many forms Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150 C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
Wave Function Trading is dedicated to providing flexible solutions to meet your mineral and commodity needs. In addition to our standard supply options, we are pleased to offer an alternative solution that grants you greater control over production and delivery. With our customizable production option, you can rest assured that your specific requirements will be met. We understand that each business has unique demands and timelines, and we are committed to working closely with you to ensure your satisfaction. Here's how it works: If our existing inventory does not align with your desired product specifications or if you have specific volume requirements that surpass our current supply, we are ready to step in and produce it for you. Our production capabilities enable us to fulfill orders ranging from small to large quantities, offering you the flexibility you need to manage your business effectively. To initiate the production process, we require a 10% down payment, which enables us to allocate the necessary resources and initiate the manufacturing of your desired minerals or commodities. This down payment serves as a commitment from both parties and acts as a guarantee to secure your order. Our dedicated team will closely collaborate with you throughout the production phase, providing regular updates on the progress and ensuring that the final product meets your exact specifications. We prioritize quality control and adhere to stringent standards to deliver products that exceed your expectations. Once the production is complete, we offer you the freedom to choose between two shipping options: Free On Board (FOB) or Cost, Insurance, and Freight (CIF). You can select the option that best suits your logistical requirements, ensuring a seamless and efficient delivery process. At Wave Function Trading, we understand the importance of reliable and consistent supply. Our commitment to meeting your demands extends beyond our existing inventory, offering you a tailored solution that aligns perfectly with your business goals. Get in touch with us today to discuss your specific requirements, volume needs, and timelines. Let us showcase our flexibility and commitment to delivering the minerals and commodities you require. With Wave Function Trading as your trusted partner, you can confidently navigate the market, knowing that your supply needs are in capable hands.
At Wave Function Trading, we understand the importance of a stable and consistent supply of minerals and commodities for your business. That's why we are pleased to inform you that we have up to 1000 metric tons (MT) per month available, ensuring you can meet your production demands effectively. We acknowledge that the required quantity may vary from month to month due to market fluctuations and specific customer needs. However, rest assured that we are well-equipped to meet your requirements. In fact, we can produce approximately 500MT within a time frame of 10-14 days, allowing us to cater to your specific production schedules and timelines. In terms of shipping arrangements, we offer you the flexibility to choose between Free On Board (FOB) or Cost, Insurance, and Freight (CIF) terms. We understand that different clients have different preferences and logistical requirements, and we are committed to accommodating your needs. To provide you with peace of mind and assurance, we offer a bank guarantee for our shipments. This guarantee serves as a safeguard, ensuring that the transaction proceeds smoothly and mitigating any potential risks associated with the international trade of minerals and commodities. In the rare event that the desired product is not immediately available in our inventory, we are prepared to take the necessary steps to fulfill your order. Wave Function Trading has the capability to produce the required product specifically for you. In such cases, we kindly request a 10% down payment to initiate the production process. This ensures that we can efficiently allocate resources and expedite the production timeline, allowing you to receive the product in a timely manner. With Wave Function Trading as your trusted partner, you can be confident in securing a reliable supply of minerals and commodities. Our commitment to customer satisfaction and our dedication to meeting your unique needs sets us apart in the industry. We strive to build long-term partnerships based on trust, reliability, and mutual success. Don't hesitate to reach out to us to discuss your specific requirements and explore how Wave Function Trading can support your business. Together, we can navigate the dynamic world of international trade, ensuring your production remains uninterrupted and your business continues to thrive.