1. Power Supply: AC220V¡À10V ,50Hz / AC110V¡À10V,60Hz 2. Temperature: -15 to 60 degrees 3. Humidity:
Functions and features: 1. Unique incomplete wheel transmission is adopted to make turnstiles held or unheld in zero position more accurate and reliable. 2. Running stable, little noise and no mechanical impact 3. Self-checking-power-on function, if power on,turnstile will auto get to be held. 4. Various working means can be set in the control panel menu, namely: bi-direction card reading passing, or one direction card reading passing and another passing limits, or one direction card reading passing and another free passing, etc. 5. If power off, arm will fall automatically while power on later, arm should be lift by hand. First press the arm with a little force and then lift it manually. 6. It is with RS485 connection for far control arm up and down to satisfy the special needs or fire control requirements. 7.It is with standard electrical interface to connect various kinds of readers and writers for easy integration and also computer far control and management can be realized by computer. 8. It will count the persons who have been passed through automatically and will show the number by LED directly.(LED is optional) 9. Passing direction will be shown by LED and passengers will know which direction is allowed to pass. 10. Card reading memory or card reading without memory function can be set in the control panel menu according to your request. 11. If working with software, the total-in-population can be set to satisfy special request. 12. Re-position function. After card reading, if passenger not through within the specific time, time and the limit passing time length can be set. 13. Card Mouting is avaliable. 14. Uncompleted wheel turning system is adopted for locking the turnstile in zero, and unlocking will be more reliable and accurate. 15. Optional: 1) Counter and counter display 2) Access controller or card reader. 3) Key by-pass. Wooden case.
1. Revolving Door Dimensions: 2200L x 1400W x 2300H mm 2. Door Material: 304 stainless steel 3. Drive Way: Electronical without mechanical card agency. 4. Turning Direction of the Gate Bar: A: bi-directional B: single-directional 5. Controller: using 16-bit microprocessor as a core device, able to programmed according to clients' needs. 6. Interface: Standard input, output interface, able to used for other system intefration. 7. Sigal: 1) Dry connect spot; 2) TTL signal; 3) 232 communication interface; 4) TCP / IP communication interface (selective) 8. Working Voltage: AC220í+10% 9. Power Supply: AC220í+10%; DC24V3Aí+10%; DC12V3Aí+10% 10. Working Enviornment: indoor / outdoor 11. Temperature: 0íµ~65íµ( special temperature need to be booked.) 12. Humidity: 5%~90% 13. On / Off Time: 1 second 14. Passing Speed: 25people /minute 15. Light Prompt: green light passing, red light no passing 16. Failure Status: Passing freely after power interrupt 17. Service Life: more than 300 million 18. Shell Protection: waterproof seal 19. Card Reader Installation: 2 20. Installation and Maintenance Position: 1 21. Protective Devices: external infrared protection grating Wooden Box
Features: The arm will drop automatically while the power cut off. Direction of through is adjustable, one-way, bi-direction. RFID access controller for standard, fingerprint reader, facial identify reader, bar code reader, consume system optionally. Optional audio prompt while gate open, support voice record inside by customer Option IR detector, support people counting, prevent follower, wrong way alarm function Option temperature controller, support machine working fine in cold weather. Option Bluetooth remote controller, support remote open.
Roste rst series turnstile is designed to control pedestrians entering and exiting restricted area , usually under surveillance in low security area. 3x120 degrees design of bar rotation make it more cost effective , bi-direction control is more suitable for high volume pedestrian traffic , up to 30 peoples is possible. It is widely used in application like railway station , museums , park , factories , airports , sport stadiums and so on. Features: 1. The whole machine is made of stainless steel according to the international design of anti-dust, moistureproof water proof, surface treatment wire drawing (default), polishing, electroplate, baking finish. 2. Drop-arm function , in case of power failure , the arm will drop automatically to ensure unblocked access , rise the arm by hand when power is on. 3. Incorporating advanced hydraulic kinetic buffering technology to ensure fast and smooth operation. 4. Equipped with led directional indication / status lights 5. The emergency button which can ensure unblocked access is available. 6. When the turnstile arms have rotated for more than 60 degrees, the mechanical override will be activated automatically to prevent tailgating. Automatically to prevent tailgating. 7.The positive action lock also helps in preventing two passage at one time 8.Anti-illegal entry with forced rotation feature which can withstand force to 80kg 9.Unique tripod design ensures safe and reliable operation. Highly durable design ensures life span more than 5 million cycles. 10.Equipped with standard input/output signal interface, can be integrated with all types of access control panel, offering complete entrance control solutions..
We introduce a new product line that is combination of high level electronic as well as mechanical security through its range of Gate Security Systems that physically prevents Unauthorized Entrants from entering the premises. The advantages of using these products compared to conventional systems include the better utilization of manpower, increased reliability and improved security. The integration of an Access Control System from those marketed by Metro Exporters can provide physical Access Control. An optional Integration of a Time and Attendance Recorder from the available range can serve the Dual purpose of Access Control as well as an employee Attendance System. Features • Our series of turnstiles is designed and tested to withstand rugged environmental and operating conditions under shelter. • Body made from Stainless steel providing a good aesthetic value while serving to be reliable. • The Fully Automatic Turnstile arm moves automatically when valid RFID Card / Fingerprint is authenticated • During an emergency or power failure the Arm of the tripod turnstile drops down making it an easy and free way to pass. • When power is restored, the Arm automatically raises up back to its normal position • Can be made to operate in Uni-directional or Bi-directional mode as per requirement. • Visual indication of Acceptance (GREEN Arrow) /Rejection (RED Cross). • Our Access Control Hardware can be integrated within the turnstile to preserve aesthetic value and increase security. Optional Features • Optional integration of Various Readers: like Fingerprint Readers, Smart card Readers and many such marketed by Metro Exporters can be integrated within the Turnstile as per customer requirements. • When the Fire Signal is activated the Arm of the Tripod Turnstile drops automatically making it a free way to pass. Once the Fire Alarm is deactivated then the Arm returns back to the normal position. • Optional Remote Control Available for operating Entry/ Exit of Turnstile. Technical Specifications Power Supply: AC220V ±10V, 50Hz Operating environment temperature: 0℃ - 50℃ Passing Speed: ≤ 25 entrants/ min Weight: 43 kg approx. Dimensions: 1235mm (L) x 780mm (W) x 1000mm (H) Length of Rod :500mm (included in above dimension)
Turnstile, tripod turnstile, waist high turnstile, optical fast lane turnstile Product feature 1 Size: 1200mm(l)*280mm(w)*960mm(h) 2 Arm length: 500mm 3 power:ac220v input, driven by dc24v 500ma safe current 4 Working temperature: -20-60 5 Working humidity: 100 ms, driven current>10 ma 7 Passing speed: 30-40 person/minute 8 Communication: tcp/ip, rs485/232 optional, distance in rs485< 1200m 9 Led high light of direction indication 10 Reader interface: wiegrand 26/34/66, rs 485/232, support many mode, magnetic, em id, mifare one ic, ti, barcode, rf id and etc. 11 Noise:
1. Driving Mode for Gate Bar: 2. Turning Direction of Gate: single-directional; bi-directional 3. Mechanism Driving Mode: direct-current motor 4. Driving Mode of Gate Bar: automatic rotation; manual rotation; rotating 10degree manully then turn automatically 5. External Devices: able to external connection of IC, ID, barcode and other reading and writing devices 6. Protection: able to turn if the external force is over the setting point, the tripod will be moved, then resetting automatically 7. Anti-reversal Function 8. Temperature: 0degree celsius~60degree celsius 9. Humidity: 5%~95% 10. Speed: >15people /minute 11. Noise: less than 50dB 12. Channel Width: 550~570mm 13. Working Environment: indoor,outdoor(need rain-proof frame) 14. Overhaul Manholes: two 15. Service Life: 3million continuous switching 16. Power Consumption: 60W. Woodenbox.
Full height turnstiles Speed gates / Flap barriers Waist height turnstiles Tripod turnstiles Optical turnstiles Access control
Electromechanical tripod turnstile IP 54 rated product High performance mechanism Micro processor based logic control board 100% duty cycle
1. Designed reasonable and reliable movement, noise, smooth running, and long service life. 2. Access Prompt function:Red and green light prompt the passing information. 3. The programmable gates control state, with a variety of operating modes you can choose, you can set a one-way or two-way control 4. Installation with personalized interface, compatible with IC, ID cards and other smart cards. 5. Standard input and output interface 6. Scour protection function ,when the gate signal is not received, the stick is automatically locked 7. Bi-direction, or one direction permitted, one forbidden, or one direction charged, one for free, and all the working molds set by the buttons in the main control board 8. Self-test failure alarm function,user-friendly maintenance and use. 9. With the power drop -shot function.In case of power off,the railing falls,and in case of power on ,the railing automatically rise. 10. Counting function:record the passing times,LED digital display function(optional) 11. Waterproof, Sunscreen, Cold and high temperature.
Product Description 1.Fault detection an alarm functions, easy to use an maintenance 2. The running status can be programme an controlle with the built-in keyboar on the main board 3. Mechanical antipinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribe time an reset again after the default delay (till fully reset) 4. Anti-breakthrough function. The gate is locke automatically until opening signal received 5. Synchronization functions (for dual gate equipments) 6. Automatic reset function. Shoul the user fail to pass within the prescribe time (default time is 5 seconds),the system will cancel the authority of the current user automatically 7. Gate can be set as normally open or normally closed 8. Can be use with variety of car readers: IC / I car readers, bar codes, fingerprints, etc. (Access controller needed) 9. Direction can be set as single-direction or bi-direction 10. LE direction indicator 11. Gate auto opens when power off an auto close when power on, complying with fire safety Requirements 12. Alarm function, in case of illegal intrusion an reverse intrusion, etc. 13. Counter function (optional) 14. Support infrare photocell for anti-pinch an reset function (optional)
Product Description 1.Fault detection and alarm functions, easy to use and maintenance 2. The running status can be programmed and controlled with the built-in keyboard on the main board 3. Mechanical antipinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset) 4. Anti-breakthrough function. The gate is locked automatically until opening signal received 5. Synchronization functions (for dual gate equipments) 6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),the system will cancel the authority of the current user automatically 7. Gate can be set as normally open or normally closed 8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed) 9. Direction can be set as single-direction or bi-direction 10. LED direction indicator 11. Gate auto opens when power off and auto close when power on, complying with fire safety Requirements 12. Alarm function, in case of illegal intrusion and reverse intrusion, etc. 13. Counter function (optional) 14. Support infrared photocell for anti-pinch and reset function (optional)
Turnstile assembling We have professional technicians and equipment service in turnstile assembling, and a few batches of turnstiles have been made and used successfully. We provide customized oem processing service such as turnstile assembling, laser welding processing.
Easy access to the electronic control module Automatic drop of barrier rod during power failure. Various operational methods available Build-in led light indicator Card readers can be installed Can be connected to any access control system Low maintenance requirements Positioning feature ensures the rods are always in right position Hydraulic damping system ensures quiet operation
Full-automatic: dc brush motor type / dc brushless motor type Semi-automatic: solenoid type / friction clutch type
Aneiz T10 Tripod turnstile-Support OEM and ODM. Support third-party biometric devices, such as fingerprint scanner, face recognition camera. RFID card reader, QR code scanner. Aneiz T10 Tripod turnstile is a high performance pedestrian control turnstile. Usually used in high pedestrian traffic flow in both directions to control pedestrian entry or exit in restricted areas 304 Stainless steel material, durable, high quality, for long lasting use. The T10 features designed with standard relay signal, which can integrate easily to any kind of access control and fire systems through I/O (dry contact). In case of emergency, when power goes off both directions are free. Passing Direction: Single directional / Bi-directional. FEATURES Aneiz T10 Tripod turnstile -Compatible with any access control systems. Aneiz T10 Tripod turnstile -304 Stainless steel material, durable, high quality, for long lasting use. Aneiz T10 Tripod turnstile - Reset automatically: the gate arm will lock if not passing at preset time (5 seconds), the time can be adjusted by software. Aneiz T10 Tripod turnstile - Rapid throughput, 35 to 40 people per minute. Aneiz T10 Tripod turnstile - Passing direction: single directional / bi-directional, both the two directions can be switched or set as free mode. LED indicator on the top displays the status of passing. Aneiz T10 Tripod turnstile -Multiple Operating Modes-optional IC/ID card, key fob, QR/bar code, face / fingerprint / finger vein biometric recognition, push button, ESD, wireless remote control, insert coins / card / wristband, digit counter... Aneiz T10 Tripod turnstile TECHINCAL SPECIFICATION Material 304 Grade Stainless Steel Dimension 330(L) X 420(W) X 990(H)mm Arm Length 500mm Passage Width 550mm standard lane Throughput 35 to 40 people per minute Response Time â?¤0.3S Net Weight 35Kg/pcs Directional Mode Uni-directional or bio-directional Emergency Function Arm release automatically for Emergency access Power Supply AC220V/110V, 50/60Hz Power Voltage 24V DC Power Consumption 20W MCBF 5 Million Operating Temperature -20 �°C - 75 �°C Operating Environment Indoor or outdoor use Relative Humidity 90% LED Indicators Red cross means gate open, Green arrow means gate closed Warranty: 18 Months
The ESD anti-static gate is mainly to test whether the anti-static shoes and wrist straps of employees are qualified, but in order to ensure that everyone must do an anti-static test before entering the dust-free car and can enter the workshop after passing the test, so it will be in front of the workshop. Install ESD anti-static access control gate, which not only detects the static resistance value, but also saves the resistance value record of each employees.
Technical dataunitel128 Passage widthmm44 Working temperaturedegree-25 to +70 Dimension excluding barsmm480x280x960 Net weight including barskg33 We areâ turbooâ automation for turnstiles since 2006 We own 3 factories and 1 office and rd center in china Hoping i can get the chance to serve you Any comments, please don't hesitate to contact me Thanks in advance!
Technical datal121 Dimension480x280x980mm Unlock time0.2s Passage width 550mm Throughput rate35p/m Power suppl100~240v Operational voltage24v Max power consumption30w Frequenc50~60hz Prectection level44ip Working temperature-25~70c Electro-magnetic drivedc Net weight36kg Input12v dr contact
