Salient Features Light weight and compact. Non overloading power characteristics. Flatter and higher efficiency curve, energy saving. F class of insulation. Lesser no. of stages of for given performance Antifriction bearings for axial / radial loads. Can be installed with HDPE / UPVC / GI pipes. Potable and hygienic grade oil filled motor. Casing, shaft, hardware of stainless steel. Impeller and diffuser of engineering plastic.
Rating Pressure: 0.1 Mpa Max Flow Rate: 200 l/Min, 240 L/min Rotate SPEE: 2820 rmp Voltage 220V/ 50 Hz Current: 9 A Power: 0.75 kw/1hp; 1.5kw/2 HP Ex proof class: ip*6 Inlet: 1.5 inch Outlet: 2 inch Adjustable Pressure: 21 kpa-207 kpa Factory Pressure Range: 79 kpa-93 kpa Working Pressure: >34 kpa
Indoma Industries Pvt. Ltd. revolutionized the desert cooler industry by introducing a technological marvel- Littelpump back in 2002. Due to its numerous advantages, it made the vertical pump obsolete in no time. Littelpump uses PMT technology which ensures long life and relief from calling electrician to change the pump every year.
Material construction of motor Part nameMaterial ShaftSs 431 / ss 410 Bearing bushLeaded tin bronze Thrust bearingS.S. / carbon / teflon Lower/upper housingCast iron Stator shellStainless steel (heavy duty) Material construction of pump Part nameMaterial Impeller/diffuserNoryl gfn 2-701 Bearing bushLeaded tin bronze Pump shaftS.S 202 Suction casing / nrvCast iron Strainer / cable guardStainless steel Operating limits Power range0.5 h.P. To 1.5. H.P. (150 /240 v, 50 hz. Single phase) 0.75 h.P. To 5.0 h.P. (350 /415 v, 50 hz. Ac three phase) Speed2850 rpm Max. Discharge400 lpm Min. Discharge15 lpm Max. Head900 ft. Per stage head20 ft. Special features : Lower power consumption Long durability due to corrosive ss body Special design to withstand wide voltage fluctuations. Excellent performance even at low voltage Special sand guard used to prevent ingress of solids or foreign particles.
Material Construction of Motor Part NameMaterial ShaftSS 431 / SS 410 Bearing BushLeaded Tin Bronze Thrust BearingS.S. / Carbon Lower/Upper HousingCast Iron Stator ShellStainless Steel (Heavy Duty) Material Construction of Pump Part NameMaterial Impeller/DiffuserSS 410 / Cast Iron Bearing BushLeaded Tin Bronze Pump ShaftS.S 202 Suction Casing / NRVCast Iron Strainer / Cable GuardStainless Steel Stage CasingCast Iron Operating Limits Power Range5.0 H.P. (180 /240 V, 50 Hz. AC single phase) 5.0 to 10.0 H.P. (350 /415 V, 50 Hz. AC Three phase) Speed2850 RPM Max. Discharge700 LPM Min. Discharge300 LPM Max. Head275 Ft. Per stage Head33 Ft. Special features : Lower Power Consumption Sand Fighter Model Long durability due to complete SS Motor body With stand with wide voltage fluctuation Specially Designed for high discharge Excellent performance even at low voltage
Material construction of motor Part nameMaterial ShaftSs 431 / ss 410 Bearing bushLeaded tin bronze Thrust bearingS.S. / carbon Lower/upper housingCast iron Stator shellStainless steel (heavy duty) Material construction of pump Part nameMaterial Impeller/diffuserSs 410 / cast iron Bearing bushLeaded tin bronze Pump shaftS.S 202 Suction casing / nrvCast iron Strainer / cable guardStainless steel Stage casingCast iron Operating limits Power range5.0 h.P. To 20.0 h.P. (350 /415 v, 50 hz. Ac three phase) Speed2850 rpm Max. Discharge1250 lpm Min. Discharge50 lpm Max. Head1300 ft. Per stage head(1) 50 ft. For k-type model / 45 ft. For q-type model (2) 35 ft. For k-type model / 30 ft. For q-type model Pecial features : Low power consumption Sand/mud proff design Specially designed ss 304 grade bowl for high head & high discharge
Material Construction of Motor Part NameMaterial ShaftSS 431 / SS 410 Bearing BushLeaded Tin Bronze Thrust BearingS.S. / Carbon Lower/Upper HousingCast Iron Stator ShellStainless Steel (Heavy Duty) Material Construction of Pump Part NameMaterial Impeller/DiffuserSS 410 / S.S. 304 Bearing BushLeaded Tin Bronze Pump ShaftS.S 202 Suction Casing / NRVCast Iron / S.S. Strainer / Cable GuardStainless Steel Stage CasingS.S. 304 Operating Limits Power Range5.0 H.P. to 20.0 H.P. (350 /415 V, 50 Hz. AC Three phase) Speed2850 RPM Max. Discharge1380 LPM Min. Discharge55 LPM Max. Head1200 Ft. Per stage Head50 Ft. for K-type model / 45 ft. for Q-type model Special features : Energy Efficient Models Long durability due to non corrosive SS body Sand/mud proff design Specially Designed SS 304 grade bowl for high head & high discharge Excellent performance even at low voltage
Bore well submersible pumpset:- FOR 3, 4, 6, 8 & 10 Inch Bore Size.
Bore well submersible pumpset:- For 3, 4, 6, 8 & 10 inch bore size.
Submersible raw water pump 175kw & 75kw to sell. Second hand - less operation time.
Tex pump is a pump manufacturer for mining, construction, dredging and also a dredging serivce provider, We also provide refurbished toyo pumps and spare parts for replacement, We care every customer, the satisfaction from customer is always our best gift. Standard export packing.
100% reliability in your agriculture irrigation HP Range: 7.5 - 60 Head Range: 12 - 325 Max. Discharge: 850 - 1750 LPM Dia: 128mm OD.
Mfg: all types s.S. Impeller and submersible pump parts 50 kg per piece
YSSP250C-2: 17.2/18.5kg 22í-16í-31cm 250W 230V/50Hz&115V/60Hz 5000l/h 46í-34í-33cm/4pcs YSSP350C-2:18.2/19.5kg 22í-16í-31cm 350W 230V/50Hz&115V/60Hz 6000l/h 46í-34í-33cm/4pcs YSSP400C-2:18.5/19.7kg 22í-16í-31cm 400W 230V/50Hz&115V/60Hz 7000l/h 46í-34í-33cm/4pcs YSSP450C-2:18.6/19.8kg 22í-16í-31cm 450W 230V/50Hz&115V/60Hz 8000l/h 46í-34í-33cm/4pcs YSSP500C-2:18.8/20.1kg 22í-16í-31cm 500W 230V/50Hz&115V/60Hz 9000l/h 46í-34í-33cm/4pcs YSSP550C-2:19/20.5kg 22í-16í-31cm 550W 230V/50Hz&115V/60Hz 9500l/h 46í-34í-33cm/4pcs YSSP750C-2: 20/21.5kg 22í-16í-34cm 750W 230V/50Hz&115V/60Hz 10500l/h 46í-34í-35cm/4pcs YSSP900C-2:21.5/23kg 22í-16í-34cm 900W 230V/50Hz&115V/60Hz 12000l/h 46í-34í-35cm/4pcs. 46*34*33cm/4pcs
Submersible pumps
Submersible pumps As per product varies
Submersible pump 6" to 12" submersible pump Capacity range: 5-1000m3/h Wooden package
Submersible water pump for water wells, mining, industries 1.5 to 300 HP
Material construction of motor Part nameMaterial ShaftSs 431 / ss 410 Bearing bushLeaded tin bronze Thrust bearingS.S. / carbon / teflon Lower/upper housingCast iron Stator shellStainless steel (heavy duty) Material construction of pump Part nameMaterial Impeller/diffuserNoryl gfn 2-701 Bearing bushLeaded tin bronze Pump shaftS.S 202 Suction casing / nrvCast iron Strainer / cable guardStainless steel Operating limits Power range0.5 h.P. To 1.5. H.P. (150 /240 v, 50 hz. Single phase) 0.75 h.P. To 5.0 h.P. (350 /415 v, 50 hz. Ac three phase) Speed2850 rpm Max. Discharge400 lpm Min. Discharge15 lpm Max. Head900 ft. Per stage head20 ft. Special features : Lower power consumption Long durability due to corrosive ss body Special design to withstand wide voltage fluctuations. Excellent performance even at low voltage Special sand guard used to prevent ingress of solids or foreign particles.
V3 SUBMERSIBLE PUMPS (ALL RANGES) V4 SUBMERSIBLE PUMPS (ALL RANGES) V6 SUBMERSIBLE PUMPS (ALL RANGES) V8 SUBMERSIBLE PUMPS (ALL RANGES) V10 SUBMERSIBLE PUMPS (ALL RANGES) V12 SUBMERSIBLE PUMPS (ALL RANGES) MINI MONO BLOCKS (ALL RANGES) OPEN WELL (ALL RANGES) MONO BLOCKS (ALL RANGES)
