Rocker Switch Suppliers and Manufacturers

Micro Switch action is PUSH-ON TYPE S.P.D.T Contact resistance measurements shall be made with a 1KHz ± 200Hz max DC 5V 1A contact resistance meter. Insulation resistance measurements shall be made following application of DC 500 V potential across terminals and across terminals and frame for one minute. The travel distance for the plunger to come to a stop shall be measured

Hook Switch is applied to low current circuit hook switch for electronic equipment. The standard test conditions shall be 5~35 in temperature, 45~85% RH and 860~1060 m bar. Storage temperature range : 30 degree Celsius to 80 degree Celsius, however 96 hours maximum for continuous storage over a range

Snap-in type, can be mounted directly on PC board. Some of output terminals can be also used as jumper leads, thus making circuit arrangement easy. Available with anti-ESD ground terminal. Although the recommended PC board thickness is 1.6mm, the models which can be mounted on PC boards of thickness 0.8 to 1mm are also available upon request.

Snap-in type, can be mounted directly on PC board. Some of output terminals can be also used as jumper leads, thus making circuit arrangement easy. Available with anti-ESD ground terminal. Although the recommended PC board thickness is 1.6mm, the models which can be mounted on PC boards of thickness 0.8 to 1mm are also available upon request.

Snap-in type, can be mounted directly on PC board. Some of output terminals can be also used as jumper leads, thus making circuit arrangement easy. Available with anti-ESD ground terminal. Although the recommended PC board thickness is 1.6mm, the models which can be mounted on PC boards of thickness 0.8 to 1mm are also available upon request.

Detector Switches is applied to low current circuit (Secondary circuit) push switch used for electronic equipment. Appearance of the Switch shall have good finishing and shall have no rust, crack of plating failures. Terminal Strength of a static load of 3N(306 gf) shall be applied to the tip of terminal in a desired direction for 1 minute. The number of test shall be once per terminal.

SIWOQ Series Automatic Transfer Switch: Product description : SIWOH1(GLR) series switch-disconnector-fuse Product General SIWOH1(GLR) series switch-disconnector-fuse (hereinafter called as switch for short) is a kind of multipole manual operation switch. It adopts DMC enclosure which has high dielectric propertyprotective capability and operating safety. The operating mechanism is an accelerating mechanism of spring stored energy and instantaneous release which instantaneously make and break multi-breakpoint contact structure. It has no relationship with the speed for operating the handle. Thusgreatly increase all electrical and mechanical properties. The switch can ensure make and break circuit under loadthe switch equipped with fuse which give reliable making and breaking protection to against over-current or short-circuit. High resistance to wet heat. The switch is beautifulnovelsimplesmall size and has complete functions. It's the best choice among the similar products. SIWOH1(GLR) series product has acquired China Compulsory Certificate. Product Features 1. Accelerating mechanism of spring stored energy and instantaneous release realizes quick making and breaking (13.8m/s). It has no relationship with the speed for operating the handle. Thus greatly increase the capability of extinguishing electric arc. 2. The DMC enclosure has excellent flame retardant propertydielectric propertyoperating safely. 3. The parallel multi-breakpoint contact has self-cleaning function. 4. It can ensure make and break circuit under loadand has the function of reliable protection to against over-current or short-circuit. 5. It's saferquicker and more convenient to change fuse. Usage AC 50Hz, rated voltage up to 380V,ratde current from 32A to 1250A. The switch-disconnector-fuse used for infrequently making and breaking circuit. 690V products are used for electric isolation. Product origin : Shenyang Key Specifications/Special Features : SIWOQ-16A~4000A/4S1

Tact Switch MT 1101 S is applied to low current circuit tactile switch for electronic equipment.The standard test conditions shall be 5 ~ 35 degree Celsius in temperature. 45 ~ 85% RH and 860 ~ 1060 m bar in atmospheric pressure. Should any doubt arise in judgement, tests shall be conducted at 20±2 degree Celsius, 60±5% RH

Tact Lever Switches is applied to low current circuit push switch for electronic equipment. Appearance of the Switch shall have good finishing, and no rust, crack or plating failures. Operating force of a static load shall be applied to the tip of actuator in operating direction. Robustness of terminal of a static load of 2N(200gf) shall be applied to the tip of terminal in a desired direction for 1min. the test shall be done once per terminal.

Tact Switch MT 1101 SE is applied to low current circuit tactile switch for electronic equipment. Storage temperature range 96 hours maximum for continuous storage over a range The standard test conditions shall be 5 ~ 35 degree Celsius in temperature.

Tact Switches MT 1101 Contact resistance applying a static load twice the actuating force to the center of the stem, measurements shall be made with a 1 kHz small-current contact resistance meter. Insulation resistance measurements shall be made following application of DC 100 V Potential across terminals and frame for one minute