Quicklime (or calcium oxide or burnt lime) is obtained by calcining pure limestone at temperature above 9000C. This highly reactive product is essential to many industrial processes. Calcium oxide (CaO), commonly known as quicklime or burnt lime, is a widely used chemical compound. It is a white, caustic, alkaline, crystalline solid at room temperature. The broadly used term lime connotes calcium-containing inorganic materials, in which carbonates, oxides and hydroxides of calcium, silicon, magnesium, aluminium, and iron predominate.
Application: Steel Making, FGD, Construction, Masonry & Mortars, Water Treatment, Chemical Processes, Mining Industry, sugar industry, Paper, Pulp and PCC, Remediation of Sludges and Wastes and Glass Manufacturing.
Packing: 1000kg Jumbo bag.
Item Specification
CaO: 92.5% ± 2
Loss on Ignition at 1000 °C: 4% ±2
Grain Size: 10- 60 mm
Reactivity: High
GENERAL INFORMATION
Quicklime or Calcium Oxide (CaO) is produced by heating Calcium Carbonate (e.g., limestone) in a special limekiln to about 1050�°C, decomposing it into Calcium Oxide and Carbon Dioxide. Our Quicklime product is sold in several sizes
Quicklime/calcined lime/burnt lime:
CaO in variant grades : 85%, 88%, 90%, and above 90%
Low MgO: max 2%
LOI max 4%
In form of powder/lumps
Packing: bulk or jumbo bags in container 20DC
MOQ 05FCL
Description
Industrial Raw Quicklime Mineral also known as calcium oxide CaO is a term commonly applied to several related materials. Pure lime is calcium oxide CaO formed by burning a form of calcium carbonate such as limestone or marble CaCO3. Calcium oxide is a key ingredient for the process of making cement. As a cheap and widely available alkali. About 50% of the total quicklime production is converted to calcium hydroxide before use. Both quick- and hydrated lime are used in the treatment of drinking water. Quicklime is used as Industrial Raw Materials with other industrial raw material products such as Silica Flour, Limestone, Aggregate, Talc, Volcanic Rock, Abrasives and Calcium Carbonate.
The quicklime products are often ground into a fine powder referred to as PULVERIZED QUICKLIME that is ideal for mixing with additives or other materials to result in specialized blended composites. Due to the chemical nature of some additives, the quicklime can become Fluidized, that is, having properties of being highly fluid. The fluidized quicklime is ideal for use with special material handling systems for optimum flowability and to avoid clogging. Quicklime can also be hydrated with water, in a process commonly referred to as slaking, resulting in HYDRATED QUICKLIME (or calcium hydroxide), a dry free-flowing powder product that is practical and efficient for many uses.
The relationship of quicklime and hydrated lime The word lime is also used to refer to calcium hydroxide and its chemical formula is Ca (OH) 2, and it is formed by the reaction of calcium oxide also with water. Calcium hydroxide is also known as hydrated lime, or hydrogenated lime while calcium oxide is known as quicklime. Both articles are rules.
There are a wide variety of uses for hydrated lime. It uses an auxiliary material for smelting in the production of iron. It is also used to purify aluminum, copper, and zinc, and remove the hardness of water by removing certain minerals from them. It also plays an important role in wastewater treatment. And we find many farmers spread lime in their fields to neutralize soil acidity. Homeowners also use it in their gardens to prevent algae growth. Lime helps hold soil in foundations of roads and runways. In the leather industry, it is used in tanneries to remove hair from animal hides. The mortar that is placed between the tiles or stones in the walls of buildings consists of a mixture of lime, sand, and water. It is also one of the most important components of gypsum, and one of the most important components of a type of cement called Portland cement.
Alpha is supplier of premium quality Quicklime.
Alpha commitment to quality ensures that end users are provided
with a low residue, high purity material which meets their requirements.
Available Lime Index (as CaO) >90%
Loss on Ignition 1.0-5.0%
Residue on Slaking 600u m >5.0%
Specific Gravity: 3.2 - 3.4
Bulk Density: 1000 - 1050kg/m3
calcium oxide (CaO), or commonly referred to as quicklime, is a high calcium content derivative of our 98.5% pure calcium carbonate (limestone). Calcium oxide is produced by heating calcium carbonate to 2000 degrees F where carbon dioxide disassociates as a gas from the calcium carbonate:
{CaCO3} + Heat = {CaO} + {CO2}
Calcium oxide can be utilized in a variety of applications because of its physical and chemical qualities. Arij Global Trading quicklime is used in flue gas desulfurization, water and waste water treatment, steel, paper, chemical and environmental applications.
This buyer is located in north sudan. The final product of this plant is used for steel plant. Shaft kiln is taken for it and the production capacity is 100tpd.
Screen plate details according to the buyers requirement:
Fuel: lpg and diesel
Raw material size: 300mm
Production capacity: 100tpd
Heat value of lpg: 11.500 kcal/kg.
Service provided to client during this process:
1. Initial design was provided according to the client
s requirement and then the contract was signed after the initial design is approved by the buyer.
2. After the down payment was available to our account, the final design was made and provided which was also agreed by the buyer.
3. All the equipment were put into production and good-quality product are ensured.
Through continuous communication, the trust from client was enjoyed by us. And our factory was also thought highly by client which contributed a lot to the contract signing.
Commodity: QUICKLIME
Purity and Quality Level: 90%
Delivery: In bulk, in bags BIG/sealed sacks
Terms of delivery: FOB or CIF, CIF with delivery to the port of destination.
Prices: Negotiable
Payment Conditions: FOB in Port of shipment or departure, COLOMBIA.
Origin: COLOMBIA
Duration of Contract: Annual contract, renewable for the same term.
Minimum amount: 10.000 MT x Month
Total / Contract Quantity: Annual sales contract with initial delivery of 10,000 until reaching 50,000 Metric Tons per month. We have an important Mineral Reserve, we are able to meet the delivery and shipment goals that are scheduled.
Inspection: Fresh SGS / access to the port or collection point requested during the assignment of Laycan SGS every 5,000 mt for quality control
Payment method: Direct bank transfer to the Seller's accounts of each load or Letter of Credit SBLC TM799 for the total annual amount of the contract + MT103 paid and discounted against a 100% approved SGS certificate, issued every 5,000 tons at the port of shipment.
Delivery Documents: All product certificates, batch numbers, Fresh SGS, delivery schedule
CHEMICAL CHARACTERISTICS:
(CaO) Available Min. 90.0%
(CaO)Total Over 90.0%
Insoluble Residues in H2O Max. 5.0%
Losses on ignition Max. 4.0%
PHYSICAL CHARACTERISTICS:
REACTIVITY
High 40 C in 3 min.
Medium 40 C in 3 and 6 min.
Low 40 C in more than 6 min.
PHYSICAL STATE: Solid
PRESENTATION: Granulated or ground
PRODUCT APPEARANCE: White color
no smell. It is not flammable. Does not have potential explosion
REACTION: Calcium oxide reacts with acids, forming calcium salts, some of which would be soluble.
Quicklime is a reactive chemical made by heating limestone. It is important for many industries, including metallurgical flux, pH neutralization, soil stabilization, desiccant, etc.
This Buyer is located in North Sudan. The final product of this plant is used for steel plant. Shaft kiln is taken for it and the production capacity is 100TPD.
Screen Plate details according to the buyerâ??s requirement:
Fuel: LPG and Diesel
Raw Material Size: 300mm
Production Capacity: 100TPD
Heat Value of LPG: 11.500 kcal/kg.
Service provided to client during this process:
1. Initial Design was provided according to the clientâ??s requirement and then the contract was signed after the initial design is approved by the buyer.
2. After the down payment was available to our account, the final design was made and provided which was also agreed by the buyer.
3. All the equipment were put into production and good-quality product are ensured.
Through continuous communication, the trust from client was enjoyed by us. And our factory was also thought highly by client which contributed a lot to the contract signing.
