Plastic Material Suppliers and Manufacturers

hdpe FILM grade granules MFI: 0.4 g/10 min 190C/2.16kg Lead time: 2-3 weeks Supply ability:500Mt/Month Payment:L/C,T/T Technical data Melt Temperature 180 to 220 °C Density 0.950 g/cm³ Melt flow rate (MFR) 0.4 g/10 min (190°C/2.16kg) Tensile Modulus 1000 MPa Tensile Stress at Yield 23.0 MPa Tensile Strain at Yield 10 % Charpy notched impact strength 5.5 kJ/m² (-30 °C) Charpy notched impact strength 12.0 kJ/m² (23 °C) Vicat softening temperature 70 °C (B50 (50°C/h 50N)) Shore hardness 60 (Shore D) Ball indentation hardness 44 MPa (H 132/30) ESCR (Basell) Applications: HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. 25KG/BAG,18MT/20FCL

Refractory plastic, also known as plastic, including high-performance wear-resistant refractory plastic, is a mud-like high-grade unshaped refractory, to ramming, vibration or extrusion methods such as construction. With excellent wear resistance, superior adhesion and high operating temperature (not less than 1600 , ), the construction process is simple, short duration, after the completion of the construction without oven and other advantages. Gongyi taurus refractory material factory is a professional refractory materials manufacturers and refractory materials suppliers, mainly supply refractory bricks, unshaped refractories, silicon carbide refractory castable, castable refractory cement, pouring material, castable refractory concrete, silica ramming mass etc. Series of refractory materials products, sincerely welcome everyone to visit.

Mainly selling pvc, gpps, eva and other plastic pellets raw materials and epp/eps foam balls, and lazy susan

High DENSITY POLYETHYLENE (HDPE) is commonly known as low pressure POLYETHYLENE. Compared with LDPE and LLDPE, it has higher temperature resistance, oil resistance, steam permeability resistance and environmental stress cracking resistance. In addition,it has good electrical insulation, impact resistance and cold resistance, which is mainly used in blow molding and injection molding fields.

High DENSITY POLYETHYLENE (HDPE) is commonly known as low pressure POLYETHYLENE. Compared with LDPE and LLDPE, it has higher temperature resistance, oil resistance, steam permeability resistance and environmental stress cracking resistance. In addition,it has good electrical insulation, impact resistance and cold resistance, which is mainly used in blow molding and injection molding fields.

PEEK polymer plastic material is a kind of semicrystalline aromatic polvmer and its main chain of macromole is consist of arvl. ketone, and ether. PEEK polyetheretherketone properties have heat resistance, chemical stability as thermosetting plastics, and good processability as thermoplastics. At present, polyetheretherketone PEEK is one of the polymer materials with excellent properties. PEEK Material Properties As one of the professional PEEK material manufacturers in China, ZYPEEK provides mainly two types of PEEK raw materials: pure resin and PEEK compounds. According to flow from low to high, there're 3 main grades: 770, 550, and 330. According to the form and processing method, there're 6 series: Powder (P), Fine Powder (PF), Granules (G), Glass Fiber Reinforced (GL), Carbon Fiber Reinforced (CA), Friction & Wear Resistant (FC). Besides the existing 52 grades, we could also provide customized PEEK composite materials according to the customer's actual requirements. Our polyetheretherketone PEEK products are widely used in injection molding, extrusion molding, compression molding, spraying, etc. You can also find more info about PEEK material applications in our application section. PEEK Raw Material Products FAQs î?? The main characteristics of PEEK raw material? ZYPEEK mainly adopts the preparation method of nucleophilic high-temperature displacement reaction to prepare PEEK raw materials. It effectively guarantees the stability and consistency of polyetheretherketone PEEK product quality, as well as the constancy of color and purity. î?? What field is PEEK raw material mainly used in? You can find the application of PEEK material in the electronic semiconductor industry, analytical instruments, industrial machinery, automotive industry, aerospace, petrochemical, and other fields. What are the characteristics of polyetheretherketone? Mechanical properties Self-lubrication Chemical resistance (corrosion resistance) Flame retardancy Peeling resistance Fatigue resistance Radiation resistance Hydrolysis resistance. î?? What is the basic PEEK material specification? PEEK raw material is compound modified with high temperature resistant structural materials and electrical insulating materials to produce various grades of compound modified special materials. For more information about polyetheretherketone cost and buy peek , please feel free to contact us! If you need any kinds of polyetheretherketone peek, please contact us, as a professional peek suppliers, ZYPEEK is willing to offer you high quality products.

For any kind of plastic regrinded materials, we can assure : QUALITY SELECTIONS NO ANY CONTAMINATION LONG TERM COOP SERIOUS AND DYNAMIC SUPPLIER