Characteristic:
1. Working voltage: 90-265v;
2. Shape of tube: o-shaped, d-shaped, flat;
3. Dimension of tube: + 30mm, + 50mm, + 80mm, + 110mm;
4. Material of tube: milky or clear in pc ;
5. Function: single color: tricolor;digital control;
6. Degree of waterproof: ip55
1. How many meters can be loaded in one continous run?
-One power cable could load 50m 240V LED neon flex in one continous line.
-One LED power supply could load 20m 24V LED neon flex in one continous line.
-One LED power supply could load 10m 12V LED neon flex in one continous line.
*If loading too much, it will cause volt drop out and may damage the driver.
2. What are the advantages of powering LED neon flex from both ends?
Advantages: By powering from two ends can continuously run max length and reduce voltage drop and make the brightness more even and uniform each part.
3. Why is the difference between rated power and practical consumption like 10m LED neon flex power less than 10 x 1m power?
The circuit impedance result in voltage drop which increased, and corresponding current and power decreased with
increasing light length, so continuously running 10m power is less than 10 x 1m LED neon power.
4. How to guarantee LED Neon Flex light uniformity ?
Strictly LED Bin control and our LED source suppliers are domestic prestigious large LED manufacturers.
5. Are they connected by manual welding?
All FPCB lights are 100% completed by automatic machine like SMD machine, PCB automatic welding machine.
6. Are they UV resistant?
After 1000 hours UV radiation test, our LED neon PVC were just slightly yellowing, and the gray level only increase one grade. UV resistance is no rate in itself. The practical application situation shall be evaluated at their own stance.
7.How to define the products lifetime and how long are their lifetime?
When use properly and correctly in accordance to related technical documents like specification, product lifetime is no less than 5 years. Lifetime Definition:
A.Within 5 years, the color temperature and color shift scope are within industry profession recognition.
B.Within 5 years, the LEDs shall not break out.
C. Within 5 year, IP protection rate shall not reduce, such as IP rate and safety performance.
8. Is it suitable for outdoor and what kind of condition required?
They are suitable for outdoor using because of IP65 accessories and UV resistance and flame resistance of PVC. But be careful the following operating environment:
9. Can LED Neon Flex be used in high temperature condition?
After a high-low temperature cycling impact tests in a -20~60 degree temperature (LED Neon Flex can use at Russia and Middle-East) and humidity chamber (60 degree 17 hours on & -20 degree 7 hours off, total 104 hours), led neon flex’s every performance is still in good condition. Considering their lifetime, we do suggest to use in -20~45 degree otherwise it will reduce its reliability and accelerate aging.
Light source: led item type: neon lights led light source: 2835 smd led input voltage(v): 12v/24v/120v/240 lamp power: 9 lamp luminous flux(lm): 1200 lamp luminous efficiency(lm/w): 80 cri (ra>): 80 color temperature(cct): white working temperature(?): -20 - +45 working lifetime(hour): 50000 lamp body material: pvc ip rating: ip65 certification: ce, emc, lvd, rohs emitting color: white place of origin: guangdong, china (mainland) brand name: matt/olites model number: ol-m-nf-240v/120v/24v/12v product name: led neon light optional volt.: 240v/120v/24v/12v led qty: 84 led per meter size: 11.5x18mm packing: 50 meters / roll carton size: 36x36x24cm gross weight: 18kgs cut length: 12leds jacket: milky white jacket or colored jacket usage: building outlining, roof, edge , billboard, letters, signboard.
59832 Neon Tubes Suppliers
Short on time? Let Neon Tubes sellers contact you.
Tubes are cylindrical containers or channels used for holding, transferring, or mixing liquids, gases, or solids. Common in laboratories, they include test tubes, centrifuge tubes, and culture tubes, essential for experiments and sample handling.
Hollow Section steel Tube is the general name for the steel pipe other than thecircular steel pipe. Such as square, rectangle, oval,elliptical, cone, trapezoidal, spiral, etc. Different steel pipe can more adapt to the particularity of use conditions, save metal and improve the labor productivity of parts manufacturing. It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, light textile and boiler manufacturing. The methods of producing different pipes are cold pulling, electric welding, extrusion and hot rolling, etc. Compared with the round tube, the different tubes generally have a larger moment of inertia and cross section modulus, and have a large bending resistance and torsion resistance, which can greatly reduce the structural weight and save steel.
We deals in the following products of India, China, Taiwan and Korea Origin:-
Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc)
Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration.
Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe.
Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes.
It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.
Innovative technology of pre-materials suitable for gas springs
welded and drawn according to ASTM A213
various ID tolerance requirement of H8, H9, H10 and H11
surface roughness below 15RA (0.40 �¼m)
mechanical properties are controlled to endure excessive stress
hardness, tensile strength, yield strength and elongation
servicing high precision pneumatic cylinder applications
