Cement mortar is basically a mixture of cement, sand & water. It is used in various aspects of civil engineering works such as masonry, brickwork, plastering, flooring etc. There are two types, dry mortar and wet mortar. Dry Mortar primarily constitutes of only sand and cement. For price, specifications and other details please contact us.
Mortar and Pestle Set, kharad, Masher Spice Mixer/Okhli and musle/Kharal White Marble Natural Stone Order Upto 1 lakh pieces
This mortar and pestle set is typical of those used in Vietnam for grinding the many spices used in their food. Handmade from coconut wood and smoothly polished to accentuate the beauty of the natural grain, its simple rustic style is ideal for any kitchen setting and makes a great gift for cooks.
Technical Data Sheet Of Accoset-50 ALUMINA MORTAR (Test Certificate) General Properties A. Max service temperature - 1500 oC B. Maximum grain size - 0 - 1.5 mm C. Water required for mixing - 22 - 30% D. Setting - Airsetting E. Sintering Temp - 1550 oC Chemical Properties A. Al2O3 - 50.00% B. SiO2 - 31.00% c. Fe2O3 - 5.00% D. LOI - 7.00% Physical Properties A. Dry Density - kg / m3 B. CCS - 17 kg / cm2 after drying at 110C / 24 hr C. MOR - 20 kg / cm2 at 110 oC/ 24 hr 18 kg/cm2 at 800 C/ 3 hr Thermal Properties - A. Refractoriness ( Orton / C) - 31.5 orton cone/1699 oC Packaging - 25 - 50 kg bags Storage Life - 12 months Delivery State - Dry
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid Ã¢?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
Size - W/SHRINKPACK SIZE: 13 DIA X 9CM (MORTAR - 5"x5"x3.5"H PESTLE - 6.75"L) CODE - W37000899
We produce kitchen furniture such as mortar, plates, spoons, made of mahogany, of various sizes and types according to the request of the buyer.
Item:grnite mortar pestle Size:as your requirement Surface finished:high polished or rough Feature:natural granite or marble, harmless Packing:into bubble bag/gift box/carton Please feel free to contact us for the latest price.......
Mortar size: Pestle size:dia4cm, long15cm. 6set/carton, 1set/white box, carton size:30.5*30.5*18cm
We manufacture refractory mortars which can be used for low temperatures as well as high temperatures up to 1800C. These are characterized by strong bonding properties, are air setting as well as ceramic/heat setting. Kindly send us your requirement to enable us to offer relevant grade. 50 kg HDPE bags with liners
Application scope Traditional ratio MODELE with ¡°JIUZHI¡± Cement Lime Sand Cement Lime Sand Agent External wall rendering 1 0 2.5 1 0 4 0.5%-0.75% External wall plastering Internal wall rendering 1 0 3 1 0 4 0.5%-0.75% Internal wall plastering 1 1 6 1 0 6 0.5%-0.75% 1 3 9 1 0 6 0.5%-0.75%.
We have prepared the mixture of private sausage spices common term color, taste, smell like features to give full consistency in. Parcel number within 15.
ZIBO SK refractory mortar is a new kind of paste-like bonding material which is formed particularly from specially sorted powder made from the identical raw materials and classification temperatures in light with the brick utilized in furnace and their refractory grades. During the process of production, it undergoes chemical reaction and stirring-up with added inorganic bonding agent and additives. ZIBO SK refractory mortar can be classified into four categories according to its service temperature in normal circumstances and they must be used to support the lightweight mullite brick subject to the same class. Category Air setting refractory mortar Grade-23 Grade-26 Thermalâ??hardness refractory mortar Grade-28 Grade-30 Features High bonding performance for bricks engineering Excellent sealing capability, resistance to erosion High refractoriness under load Outstanding efficiency in reducing the slag Ensure well-sealed joints for convenient installation Consistency and bonding effectiveness Typical Applications Necessary auxiliary materials for insulating Firebricks in the furnace lining
We, Imperial World Trade Frequently Placed In Ordinary Portland Cement Mortar, Sometimes With A Little Extra Cement Or Some Fireclay Added To Make The Mixture Fireclay Mortar. A Refractory Composition Comprising Of Heat Resistant Binding System And Low Grain Size Refractory Furnaces. Mostly Used For Joining Bricks. Two Types Of Settings: Air And Heat Setting Mortar The Mortar Hardens At A Heat Above Room Temperature. The Problem With Using Regular Mortar Is That Portland Cement Can't Take The Heat. Curiously, Cement Retains Its Energy Up To Reasonably High Temperatures But Declines As It Cools Down Through About 600Ã?Â° F. Ultimately All That Is Left Of The Mortar Is The Sand And Fireclay, With No Cement Binder. The Mortar Has No Strength And Easily Falls Out Of The Joints, Especially If They Are Wide. Refractory Mortar, On The Opposite Side, Is Performed With High-Temperature Cement And Carefully Selected Aggregates That Don't Expand And Tear The Mortar Apart When Heated. The International Residential Code (IRC) And International Building Code (IBC), Which Were Recently Adopted In Approximately All States And Require That Fireboxes, Smoke Chambers, And Flue Liners Be Laid With Refractory Mortar.
Gongyi taurus refractory material factory is a professional refractory materials manufacturers and refractory materials suppliers, mainly supply refractory bricks, unshaped refractories, silicon carbide refractory castable, castable refractory cement, pouring material, castable refractory concrete, silica ramming mass etc. Series of refractory materials products, sincerely welcome everyone to visit. TypeGDL-1 GDL-2 GDL-3 GDL-4 Chemical composition (%)SiO296969696 Al2O3â?¤0.70.60.60.5 Fe2O3â?¤0.550.550.50.5 Cold crushing strength (Mpa)1250â??Ã?3h After firing at15151010
We, Imperial World Trade are one from the excellent Manufacturers, Suppliers, Importers and Exporters of Insulation Mortar. The Insulation Mortar is constructed using a high-grade stuff, which is obtained from reliable vendors. With high production and strength, the Insulation Mortar is being extensively used in various industries. We also offer customized range of Insulation Mortar at affordable rates. Our product offers Features which includes durable, lightweight, dimensionally accurate and made from the high standard of material. This makes it feasible to assemble insulating masonry or carry out small repair, sealing and getting jobs by using traditional laying methods, assuring that thermal dispersion is kept beneath control and dodging the risk of surface condensation when the dew point is reached. Features includes easy to use, good adhesive value and acid resistant
Mortar is distinguished between heat-setting property and air-setting property. Heat-setting property displays strength by heating after installation and air-setting property displays excellent strength at the normal temperature. Therefore, it has better select air-setting mortar in case of need special strength at the normal temperature and we are supplying mortar of various type that is suited to installation condition and fire-brick.