We offer the below types of copper & alu scrap: 1). Copper A regrind 2). Copper & brass shredded 3). Alu - copper shredded (80/20) 4). Alu shredded 100% Interested parties please contact us for offers.
Plastic scrap, reprocessed plastic, recycled pellets, metal scrap, electronic scrap, paper scrap.
Washers, circlips & retaining rings, hose clamp like bend, flex pipe, wire form type, metal pressed parts, wire form parts, construction hardware, electrical hardware, automobile components, air, rail, road components, construction materials.Sourcing agents
BFS consists primarily of silicates, aluminosilicates, and calcium-alumina-silicates. BFS forms when slagging agents (e.g., iron ore, coke ash, and limestone) are added to the iron ore to remove impurities. The average chemical composition of the material is the following: CaO 36.50% MgO 7.90% Al2O3 11.70% MnO 1.13 % K2O 0.43 % Na2O 0.22% FeO 1.71 % SiO2 38.73% TiO2 0.69% S 0.86% We have available two different lots of slag GRANULATED BLAST FURNACE SLAG The granulated blast-furnace slag is sand-type slag manufactured by spraying high-pressure water jets on a blast-furnace molten slag. We have 3,330 Ton of this material ready for shipment and it can be supplied to the domestic and the overseas markets for cement and ground granulated blast-furnace slag production. AIR COOLED BLAST-FURNACE SLAG This material is manufactured from molten blast-furnace slag by air-cooling process. The product is not crushed and screened. The material at visual inspection appears as formed by lumps of different size. It is classified has a waste with the following EWC Code: 10.02.01. We have available10,300 MT ready for shipment . The material must be crushed in accordance with the specified application and sold as materials for road base course material, rock fiber, coarse concrete aggregates and cement clinker raw materials.
1.Material: brass C3600-C3604, bronze, copper, copper alloy etc. 2.Process: sand casting, investment casting/lost wax casting, 3.Machining capability: CNC Machining Center, CNC Precision Lathe, CNC Drilling and Tapping, 4.Heat treatment: T6 heat treatment 5.Surface treatment: polishing, mill finished, machined, sand blasting, powder coat, painting etc. We can manufacture various kinds of copper(copper alloy) casting parts according to your drawings or sample with high-quality, competitive price.We also accepting small order. Our strong R&D and QC department can control the products to meet your strict requirement or ISO9001 standard. And we also offer the engineer consultation to your design for production improvement and cost saving. Delivery time: 45 days after confirmation of order andd drawings. Applied software for specification drawings: Pro/E, Auto CAD, Solid Work; CAD/CAM/CAE. Packing: protective, bubble pack, carton, pallet or based on your special requirement.
Product Performance * The main body of machine is made by high quality host casts and through second tempering treatment to ensure that whole machine can keep good and last longer. All the moving parts are made by the best material and through special technical treatment which can improve capability and ensure the machine life * The key parts are made by numerical control machine and CNC to ensure the precision which can make the machine more stable and lower the noises. * We use famous hydraulic components and pneumatic components to ensure the stability of machine and the force lubrication systems make every moving part always running under a good lubrication environment. It is a good way to longer a machine work life. * The major motor controlled by frequency converters and the driven system adopted pneumatic clutch device and pneumatic brake device to ensure the sensitivity and make the adjustment is more easily and more quickly. * The electric control system adopted PLCS which can ensure the whole machine always work in a normal way and auto deal with different kinds of failure. * The whole machine adopted seal completely design which can improve thesafety and make the work environment more cleanly. Specification and Model SPECIFICATION/MODEL DW06050-3M DW08075-4M DW10100-4M DW10150-4M DW12150-4M Die number 3 4 4 4 4 Max Cut-Off Dia.(mm) 8mm 10mm 12mm 12mm 15mm Max Cut-Off Length(mm) 70mm 105mm 135MM 180mm 185mm Max Product Length (mm) 50mm 75mm 100mm 150mm 150mm Min Product Length (mm) 12mm 16mm 16mm 30mm 40mm Max Knockout Dis.(mm) 60mm 90mm 115MM 175mm 180mm P.K.O 13mm 20mm 20mm 30mm 30mm RAM Stroke 120mm 170mm 180mm 250mm 270mm Cut-Off Die Dia.(Dia x Len) 28x46mm 35x56mm 40X66mm 40x80mm 46x80mm Main Die Dia. (mm) 50x65mm 60x105mm 70x135mm 80x185mm 93x190mm Main Die Center Dis.(mm) 60mm 87mm 93mm 93mm 114mm Punch Die (Dia x Len) 40x80mm 45x110mm 50x111mm 50x130mm 60x170mm Forging Load 40tons 60tons 85tons 85tons 120tons Max Output (pcs/min) 300 (pcs/min) 240 (pcs/min) 200(pcs/min) 175(pcs/min) 125 (pcs/min) Major Motor (HP) 15hp 25hp 30hp 40hp 50hp Lubricate Motor (HP) 2/3hp 1hp 1hp 1hp 2hp Cooling Motor (HP) 2/3hp 1hp 1hp 1hp 1hp Net Weight (kg) 6000kg 12000kg 17500kg 20000kg 25000kg.
Rice, corn, sugar, wheat, cement, aluminum ingots, copper scrap , used rail and HMS 1&2.
Star products: mainly produces products that forms a complete set for products as oil filter, plumbing, fire fighting etc., including various series hydraulic filter casting housings, oil and gas separator housings, marine copper valves, meter boxes, marine navigation bridge frames, as well as other aluminum alloy & copper castings ect., which is characterized with high pressure resistance, anti-corrosion and anti-wear, therefore has acquired world wide good reputation with excellent quality.
Manufacturer of Health and Sport Supplements in Canada., Exporting Ferrous and Non Ferrous Scrap, Electric Motors, Transformers, Alternators, Starters, Compressors, Tungsten Drill Bits, Titanium Scrap Etc., Cast iron, HMS, PNS, Rebars, Steel pipes scrap, Used Rail scrap.