Heat shrinkable tube Cb-hft is a halogen-free low smok, flexible, flame-retardant heat-shrinkable tubing. This tubing is free of pb, cd, hg, cr+6, pbb and pbde.Cb-hft can be used in any enclosed area where a flame-retardant, halogen-free enviroment is requiedthe product is ul recognized and the file no is e180908, all are f mark. Carton 3000m/1000m per carton
Heat shrinkable tubing
Heat shrinkable tubing Nornal Heat Shrinkable Tube Thin Wall Heat Shrinkable Tube Halogen Free Flame-retardant(Envioment Free) Halogen Free Heat Thin Wall Shrinkable Tube Non Flamer Heat Shrinkable Tube Daul Wall Heat Shrinkable Tube Yellow / Green Heat Shrinkable Tube Silicone Rubber-Insulated Tube High termperature PTFE tube Heat Shrinkable Insulated Belt
WOER Flame-retardant Heat Shrinkable Tube has properties of insulation,low recovery temperature,rapid shrinking and flexibility.It is suitable to the prevention of overheating for temperature sensitive components
Green stripe heat shrinkable tube
Yellow & green heat shrinkable tube Colors : yellow/green
Item value Shrinking temperature start at 80oc Operating temperature -55ocf¼125oc Elongation strength fª200% Tensile strength fª10.4mpa Volume resistance ·+1014¬+/cm Dielectric trength fª15 kv/mm
Teflon (PTFE) heat shrinkable tubing, half hard, flame-retardant, can use for a long time under the high temperature of 200 deg. celius, almost resistant to all the oils and chemicals.
Heat shrinkable tube Cb-hft is a halogen-free, flexible, flame retardant heat-shrinkable tubing. This tubing is low smoke generating, abrasion resistant and in case of burning, no dioxin is produced. Cb-hft can be used in any enclosed area where a flame-retardant, halogen-free enviroment is requied, such as metro, skyscraper, mass transit vehicles and ships. The product is ul recognized and the file no is e180908. Carton
Pure silicone heat shrinkable tubing not only has excellent properties of the silicone tube itself commonly, resistance to high temperature,high pressure resistance, sof and elastic, and also have thermal shrinkage performance, excellent wear resistance and cutting resistance, corrosion resistance and chemical reagent resistance. Can be use for a long time under high temperature 200 degrees celcius, widely used in military or commercial areas need liquid corrosion resistance under high temperature, resistance to fuel, lubricant, acid resistance and chemical solvents.
Operating Temperature -30 to 125 Features 2:1 shrink ratio Very good chemical and solvent resistance Very flexible Excellent physical, electrical and flame-retardant performance
Technical&used Product from heat-shrink and low-melting polymer adhesive layer. Product heating, melting outer shrink, the inner layer, so that is protective seal charged body, the integration of insulated. Main use: minor caliber pipe, stainless steel and other hard objects outside coating, reinforcement, such as acoustic tube, concrete connection buried pipes, corrosion-resistant and waterproof. Installation: the materials supplied by 5cm lap, heating guns from one end to the other end of the uniform baking, to shrink after the inner layer at the sol along the cascade, uniform effuse cooling after the self-contained. Export standard
Operation temperature: -50 to +125 Celsuis. Security: used to protect switch systems up to 1kV and can reduce the distance to ground. Convenience for application: the continous length as supplied make the application more conveniently and economically. ZRG series products were recognized as jiangsu province high and new technical product in 2000, its product number:000500G0030N. Specification: 1.Tensile Strength: í¦12 Mpa 2.Ultimate Elongation: í¦400% 3.Tensile Strength After Aging(After 7 Days Air Oven at 158Celsuis): í¦10 Mpa 4.Elongation After Aging(After 7 Days Air Oven at 158Celsuis):í¦300% 5.Deformation Test(131Celsuis\1): í_25% 6.Heat Shock 250Celsuis: No Cracking 7.Conductor Corrosion(After 7 Days Air Oven at 158Celsuis): No Corrosion 8.Volume Resistivity: í¦1014 ª+.cm 9.Dielectric Strength: í¦25 Kv/mm 10.Dielectric Withstand After Aging(After 7 Days Air Oven at 158Celsuis): 2.5Kv\60sec. 11.Breakdown Voltage After Aging(After 7 Days Air Oven at 158Celsuis): í¦12 Kv 12.Cold Bend(-30Celsuis\1hr): No Cracking 13.Longitudinal Change(200Celsuis\3minute): +10% to -10% 14.Eccentricity: í_30% 15.Flammability: VW-1
Min. shrink temperature: Max. shrink temperature:125 Continuous operating temperature: -55 ~ 125 Heat shrink ratio: 2:1, 3:1 Environmental standards: RoHS Color standard: green and yellow 200M/ROLL
Meets UL 224CAN/CSA C22.2 NO198.1-99 Shrink ratio��o3:1 Zero halogenlow smoke emission, Min. shrink temperature Min full recovery temperature��o120 Continuous Environmental standards Standard colors��oblack 200M/ROLL
Heat shrinkable wraparound sleeve
Meets UL 224CAN CSA C22.2 NO198.1 -99 Heat shrink ratio 2:1 Halogen-free low smoke generation non-toxic flexiblenon flame retardant Minshrink temperature:70 Minfull recovery temperature Continuous operating temperature -55 105 Environmental standards :RoHS IPC/JEDEC-J-STD-709 Class H material Standard colors transparentblack white red yellow green blue and other four international standard colorsMore colors are available upon request. 200m/roll
Dasheng DRS-1 tubings are flexible, flame retardant and have a shrink ratio of 2:1. The tubings are certified by UL/CSA. They are used for a variety of applications from insulation to bundling and mechanical protection. The tubings are rated for 125 Celsius and are available in black, white, blue, green, yellow, red and grey colours. Other colours are also available on request. Technical Data 1 Tensile Strength: 13 N/mm2 2 Ultimate Elongation: 350% 3 Heat Shock @ 250 Celsuis: passes 4 Cold Bend @ -30 Celsuis: passes 5 Flammability: passes 6 Dielectric Strength: 15kV/mm 7 Volume Resistivity: 1x1014ª+*cm 8 Longitudinal Change: Inside +/-5% 9 Water Absorption:
HTS Tubular Heat Shrinkable Sleeve
Meets UL class of high temperature integrated tube compatible AMS-DTL = 23053/5 and UL 224 , CAN / CSA C22.2 NO198.1 -99 Heat shrink ratio : 2:1 Low smoke generation , flexible, flame retardant Min. shrink temperature :84 Min. full recovery temperature :120 Continuous operating temperature : -55 ~ 150 RoHS compliant Standard colors :black, white, red , yellow , green , blue and four other international colors. More colors are available upon request. 200M/ROLL
