Our products can comply with the following requirement : 1 FC 98.5% min 2 S 0.05% max 3 N 0.03% max 4 H 0.03% max 5 Ash 0.5% max 6 Volatile 0.5% max 7 Moisture 1.0% max 8 Partical size : 0-0.2mm 0.2-1.0mm 1.0-4.0mm 1.0-5.0mm 4.0-10mm 5.0-10mm 1 small bag in jumbo bag 2 1mt bag 3 other package
Property In order to make up for the loss of carbon in the smelting process of iron and steel, the carbon containing substances added are called carburants
There are many kinds of additives, and the production process is different. There are wood carbon, coal carbon, coke, graphite and so on. There are many kinds of different kinds. A high - grade carbon - carburizer generally refers to a graphitized carbon - based additive, which in high temperature is graphite in the microform of graphite. The graphite can reduce the content of impurities in the carburizing agent, increase the carbon content of the carbon and reduce the sulfur content. The use of carburizer in casting can greatly increase the amount of scrap steel, reduce the amount of pig iron, or use no pig iron. The feeding method of furnace smelting should be put into the furnace with waste steel and other materials, and the small dosage can be added to the surface of the molten iron. However, it is important to avoid large quantities of iron and water in order to prevent excessive oxidative effects and insufficient carbon content of casting. The amount of carbon added is determined according to the ratio of other raw materials and carbon content. Different types of cast iron are selected according to the need to choose different types of carbon. The characteristics of the carburizing agent itself choose pure carbon graphitized material, reduce the impurities in pig iron, and the choice of carbon addition agent can reduce the production cost of the casting.
carbon raiser used in steel making or iron casting,100% pure Anthracite Coal,help you to save cost of pig iron or steel srap when steel making. specification of Anthracite Coal is below : FC>90,S
We can supply Recarburizer/ Carbon Raiser/carburetant Recarburizer/ Carbon Raiser/carburetant are used in casting, cast iron, cast steel, and castings. There is a requirement for carbon. Therefore, as a name suggests, carbonizers are used to increase the carbon content in molten iron. For example, the common charge in smelting is pig iron, scrap, Back to the charge, the carbon content of the pig iron is high, so increasing the amount of scrap steel, reducing the amount of pig iron, and adding carbonizer can play a role in reducing the cost of castings. We can supply all spec. FC 80,FC 85,FC 90,FC 92,FC 93,FC 94 FC 95, FC 98 so on all grade. Packing as client demand.
We can supply Recarburizer/ Carbon Raiser/carburetant /Calcined Anthracite Coal/Carburizer carbon additive/Recarburizer/ Carbon Raiser/carburetant are used in casting, cast iron, cast steel, and castings. There is a requirement for carbon. Therefore, as a name suggests, carbonizers are used to increase the carbon content in molten iron. For example, the common charge in smelting is pig iron, scrap, Back to the charge, the carbon content of the pig iron is high, so increasing the amount of scrap steel, reducing the amount of pig iron, and adding carbonizer can play a role in reducing the cost of castings. We can supply all spec. FC 80,FC 85,FC 90,FC 92,FC 93,FC 94 FC 95, FC 98 so on all grade. size: 3-5mm1-3mm1-4mm1-5mm or according to customer's requirements. packaging: 1mt big bag;20/25ton bag packing and Packing as client demand.
Product Properties 1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2), Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3), Fine classification - Various product category, to provide customized carbon raising scheme 4), Cost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost.
Product Properties 1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2), Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3), Fine classification - Various product category, to provide customized carbon raising scheme 4), Cost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost.
Supply Carbon raiser CAC/Calcined anthracite coal: FC: 85%, 88%, 90%, 91%, 92%, 93%, 94%, 95%, Sulfur: 0.3%, Ash: 3.5%-18%, VM: 1.5%, Moisture: 0.5%max, Size: 0-1mm, 1-5mm or as required.
1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2), Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3), Fine classification - Various product category, to provide customized carbon raising scheme 4), Cost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost. For 0-5 T furnace use: While a small amount molten iron in the furnace Or with some molten iron remained. add the carbon additive one-time Then add the other material Which can make carbon additive fully absorbed. For greater than 5 T furnace Mix proper carbon additive with charging material as suggested first, And then along with the increase of furnace charge down into the furnace inside gradually. That is, before the molten metal rising up to about 2/3 height of furnace All carbon additive shall be added It guarantees sufficient melting absorbing time before molten metal out, and improves the absorption of carbon.
Sulphur Content (%) 0.5 Fixed Carbon (%) 98 Phosphorus Content (%) 0.03 Volatile Matter (%) 1 Place of Origin Shandong, China Calory (J) 7300 Ash Content (%) 0.5 Moisture (%) 0.5 Abrasive Resistance M1080% Brand Name GDCOKE Other name CPC Coke Grades First Grade Material Green petroleum coke HS CODE 27131290
Carbon additive 1. Product description: The main raw material is ningxia unique high quality anthracite, with characteristic of low ash and low sulfur. Carbon additive/carbon raiser has two main uses, namely as the fuel and additive. When being used as the carbon additive of steel-smelting, and casting, the fixed carbon may achieve above 95%. 2. Application: It may substitute massively refinery coke or the stone grinds. Meanwhile its cost is much less than the refinery coke and the stone grinds. Carbon additive/carbon raiser may also use as the fuel, for its calorific value may achieve above 9386k/kg. It may substitute burnt carbon massively. The burnt carbon exportation needs the quota; therefore the carburizing agent price superiority is similarly obvious. 3. Specification: Carbon raiser: 90%min; s: 0.35%max; ash: 8.5%max; v.M: 1.5%max; h2o: 0.5%max; 91%min; s: 0.35%max; ash: 8%max; v.M: 1.2%max; h2o: 0.5%max; .C: 92%min; s: 0.3%max; ash: 6.5%max; v.M: 1.2%max; h2o: 0.5%max; 9:f.C: 93%min; s: 0.3%max; ash: 5.6%max; v.M: 1.2%max; h2o: 0.3%max; ,94%min; s: 0.25%max; ash: 5.0%max; v.M: 1.0%max; h2o: 0.5%max; ,f.C: 95%min; s: 0.25%max; ash: 4%max; v.M: 1%max; h2o: 0.5%max; Size: 1-5mm/1-4mm, 90%min, or at customers' option; Moq: 40mt(20mt for a 20' container); Packing: in 25kg small bags or in 1mt/1.2mt big bags;
Size: 1-3mm, 1-5mm, 90%min, or at customer's option
This product has won the state invention patent. We are the only manufactuerer in domestic market which can produce the fixed carbon to 99% min. 0-30mm mesh size/grain size are okay. We can do as your requirement.
eum coke. It is mainly used as the recarburizer during the steel making. The product is characterized by no residual, high availability, convenient operation, reduced production cost, extremely low content of phosphor and sulfur and stable performance. 2) calcined petroleum coke recarburizer The raw material of the calcined petroleum coke is petroleum coke. It is a new material to improve the technology and enhance the quality of molten steel/iron in the industry of smelting. It is characterized by the high content of fixed carbon, low sulfur content, stable carburetion and high absorptivity of carbon. 3) calcined anthracite The raw material of the calcined anthracite is coal. It is an additive during the steel making, which is indispensible for the production of high-quality steel. In addition, it is the raw material to produce the electrode paste. Size:1-5mm, 1-3mm etc Package: 25kg small bag in 900kg jumbo bag
Low sulphur carbon additive 1.Our style no.: t9805 2.Type:graphitized petroleum coke 3.Fixed carbon content : 161;y98.5% Sulphur content : 0.05% Ash content : 0.50% Volatile content : 0.50% 4.Particle size : 1-5mm 5.Feature:first-class quality, low price, timely delivery and our best service.
High C Carbon Additive Our style No.:T9850 Carbon content: Y 98.5% Sulphur content: ¨0.50% Ash content: ¨0.50% Volatile: ¨0.80%. Particle size: 1 to 5mm, as your requirments.
Grade: 1. Carbon Black PL330J 2. Carbon Black PL330C 3. Carbon Black PL330C 4. Carbon Black PL550C 5. Carbon Black PL550B 6. Carbon Black PL550C 7. PL660B Beads 8. Carbon Black P330 9. Carbon Black P550 10. PL772B Beads Purity: 1.OAN (ml/100 gm) >90 2.OAN (ml/100 gm) >90 3.OAN (ml/100 gm) >95 4.OAN (ml/100 gm) >100 5.OAN (ml/100 gm) >100 6.OAN (ml/100 gm) >100 7.DBP No (OAN) (cc/100 gm) >100 8.DBP No (OAN) (cc/100 gm) >100 9.DBP No (OAN) (cc/100 gm) >105 10.DBP No (OAN) (cc/100 gm) >90 Actual price will be provided after your enquire.
We are exporter of Activated Carbon. Activated carbon made from raw organic material such as coconut shell. The raw material of activated carbon pulverized and sieved into appropriate and uniform particle sizes. Carbon has been used as an adsorbent for centuries. Activated carbon is a particularly good adsorbent due to its high surface area to volume ratio.
We are supplier and exporter of Activated Carbon. Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Powdered Activated Carbon Powdered Activated Carbons are small activated carbon particles, with a size that is predominantly less than 0.075 mm. Activated Carbon is used worldwide in purification of Water, Air, etc. We are producers Dura specie of Palm Kernel Shells Powder & Pellets Activated Carbon, with over 1600 Iodine level and equally high level of Harness.