Canopies have the same purpose that is to provide the shelter. It is used for both home and commercial use. If you are searching to prevent the sunlight to directly penetrate your window then we have the right solution.
Container Type Canopies
Product Description:
We are a trusted Provider of Container Type Generator Canopies. Our Canopies are best for different industries and can easily hold big gen sets. These are available in different models and Capacities. Our expert professionals can manufacture them as per the requirement and specifications of the client. These are available at market's leading price and products are delivered within stipulated time.
Applications Notes:
Realco Acoustic Canopies is designed to comply to the CCOE/CPCB regulation. The canopy are equipped with Discharge, Intake and Exhaust silencers. The noise level is designed to achieved 70 to 75 dB(A) measured at 3 meter away. In selecting a silencer for a canopy, a balance between noise reduction, pressure drop and heat rejection need to be calculated cautiously By using internally developed software, Realco Power Projects can help to make the right choice quickly and most importantly, accurately.
Introduction:
Canopy application for housing a generator set has gaining its popularity over the years. This is due to a portability of the set to be from one place to another and furthermore the cost for housing a generator set is cheaper as compare to a normal concrete house.
Construction:
The internal construction of the canopy panel uses only Rockwool and protected with perforated G.I. This construction has proven to be the most cost effective in the long run. Realco Power Projects has developed the modular system panel which provides great flexibility at low cost. The panel are standard 65mm thickness, formed from 2.3mm mild steel, inert acoustic infill and galvanised perforated inner sheet steel. The finest quality materials and workmanship ensure that a final solution gives the best in noise control without affecting airflow, operation, maintenance or inspection. Exhaust pipe which is inside the canopy must be insulated to avoid overheating problem. The exhaust lagging is done by using rockwool as thermal insulation wrapped with aluminium jacketing.Fuel tank is located at the base frame. The designed therefore will serve dual purposes - acting as a supporting base and fuel tank. The body and the base can be separated for maintenance (genset overhaul) in the future. Windows, exhaust penetrations, radiators and electrical cables, fitting and fixtures are all standard.
Dimensions: As per customise
Features:
Durable
High performance
Weather proof
Colour: Products are available in any RAL colour (full RAL colour selection chart available upon request). Custom colour matching is also offered.
Size:600mm x 740mm
Bracket:plastic composite
Board:4mm PC twin-wall sheet/3mm pc solid sheet
Aluminium fixing bar
Length:740,1480,2220mm
Width:600mm
Warranty:10years.
Our helicopter canopies are made of glass fiber, much lighter but stronger. There are various of nice design, types are 450, 500 and 600. If your order is large enough, we can do it according to your own requirement. OEM is available. Good quality, best price and best service is our advantage.
Reliability
Withstand adverse conditions
User-friendly
Zero maintenance
Specifications:
Available in customized patterns
Frame: Aluminium
Fabric: Polyester fabric, waterproof
Color: Many plain color or stripe or as your requirement
Max.size: Max.width is 6m, max.extention is up to 2.0m
Fully assembled and ready to be installed
Easy to install and simple to operate
Canopy light is a special designed, multi- functional LED luminaire to replace under canopy or Industrial Low- bay.
LED Canopy lights are used at gas station and petrol pumps.
Pressure die-cast aluminium LED housing designed to act as heat sink for efficient dissipation of heat.
Electrochemically brightened and anodized aluminium reflector with modular lens.
Heat resistant toughened glass provided with gasket and SS clips to ensure ingress protection of IP65/66.
LED Colour Temp.: 6000K + 500K Luminaires provided with a mounting bracket for aiming adjustment.
The driver used is specially designed to have built-in 4-6 KV surge protection, open/short circuit protections.
Finish: Powder coated.
Beam Angle: 120 Degree & 160 Degree.
2 years warranty.
Virtual make Plant Canopy Analyzer offers convenient and flexible tools for measuring and analyzing incident and transmitted Photo synthetically Active Radiation (PAR) in Crop and Forest canopies. It provides vital information about the penetration of PAR into crops and forest, and is essential in work such as comparative crop studies, for separating out the effects of cultivars and treatment. It is particularly well suited to low regular canopies (as found in many agricultural crops). It can be used in most light conditions. The first sensor probe has an array of 10 PAR sensors embedded in a 1m long probe, and is connected with Handheld Terminal. The second sensor probe also has a 1 PAR sensor embedded in a 0.5m long probe, and is connected with handheld Data logger. One PAR Sensor is also connected with data logger for reference incoming radiation. When a reading is taken, all sensors are scanned and the measurements transmitted to the data logger.
Description: camping tent, canopy tent, outdoor tent, family tent, wedding tent, pop up tent, plastic tent, fishing tent, party tent, exhibition tent, event tent, awning, marquee
Size: 2*2m, 2*3m, 2.5*2.5m, 3*3m, 3*4.5m, 3*6m(any size can be customized)
Material Iron, aluminum alloy
Outer leg 30(h) x 30(w) x 0.4-0.7 mm(thickness)
Inner leg 25 (h)x 25(w) x 0.4-0.7 mm(thickness)
Cross tube 13 (h)x 26 (w)x 0.4-0.7 mm(thickness)
Fabric: pe fabric, polyester, oxford, nylon
Color: any color available(white, yellow, blue, red and green......)
Weight 12kg, 12.5kg, 13.5kg, 14.5kg, 18kg, 20kg, 23kg(as requested)
Description: easy and fast setting up structure+high quality+durable
Optional accessary: half side wall / full side wall / carry bag / window / door /additional pole
Usage: outdoor exhibition, product show and celebration, advertising and promotion
partytent weddingtent grandes chapiteaux tentage wedding marques tent
Main Frame
Hardpressed Aluminum Alloy T6061/T6
Roof
850g/sqm white PVC Fabric
Sidewall
650g/sqm white PVC Fabric
Available Width
from 3meter to 60m
Length
Unlimited
Sidewall Height
2.7m, 3m, 4m, 8m or customized
OEM/ODM
Available
Application
Wedding,Party,Event,Exhibition,etc
1) Gazebo Size:
1.5x1.5m,2x2m,2.4x2.4m, 3x3M, 3x4.5M, 3x6M, 4x4M, 4x6M, 4x8M, 5x5M, 6x6M
2) Frame:
Hard pressed extruded high intensity aluminum oxidized alloy,
3) Roof & Side wall:
POLY:420D Polyester with PVC coating, 320GSM, Fire retardant to Din 4102 B1, M2, Water proof
600D polyester with PU coating, 215gsm, Fire retardant to Din 4102 B1, M2, Water proof
PVC:0.35mm thickness, 440gsm / 0.46mm thickness, 580gsm
4) Printing:
We can add your Logo or any Trade Mark on the roof or side walls, it can be silk
screen printing or high solution photo digital printing. The printing machine and oil are all imported from Korea which can ensure the high printing quality.
5) Connector:
High Strength Aluminum Connector/High Strength Nylon Connector
6) Facility on installation:
The newest detachable designing, to make the tent building more portability and easy to remove and storage
Pop Up Canopy Tent suitable for Stalls, guard, parking, outdoor advertising, portable tent, Festival, Exhibition, And Much more use.
Available are Two sizes:10ft*10ft And 6ft*6ft. with Top available in Three Color Red and Green & Blue Color.
Beautiful portable shade canopy, the 10ft*10ft, And 6ft*6ft, large size garden party canopy is the perfect solution to provide quick and easy shade for dining, parties or just relaxing outdoors. This large canopy provides more shade for larger gatherings, picnics, friends and family.
This canopy features a water resistant 100% polyester. Garden party canopies are 10ft x 10ft with a side height of 6'6" and center height of 10'3" to provide plenty of headroom. The steel frame is powder coated with 1-3/8" diameter tubes and comes with four legs. Optional Ground Anchor kit which contains FOUR - 15" screw-in anchors and 40' of rope for mounting on your lawn can be purchased to firmly secure your canopy in the backyard or lawn.
Features:
Dimensions: 10ft x 10ft, & 6ft*6ft.
Easy assembly.
Center height: 10ft 3in.
Side height: 6ft 6in.
Colors: Red,Green & Blue.
The polyester cover is 3M Scotch Guard protected.
1 3/8in diameter powder coated steel frame.
This canopy is constructed with a commercial strength steel frame, and it is easy to set up and take down. The cover material is made from durable 500 denier polyester. Includes roller bag with double carry handles.
Canopy Top Water resistant polyester standard 500D
100% UV protection
Fire resistant - CPAI-84/ULC S109 & NFPA 701 Flame Retardancy Standards
Frame Style - Aluminum
Strongest frame available, withstands strong winds
Hexagon shaped legs for added strength
Pull-pin system for ease of use.
