Stepper driver controls the stepper motor moving, move direction and moving steps. Step driver micro the motor steps, so ensure the precision.
CNC driver is widely used on CNC router, cnc laser machine, cnc plasma cutting machine, cnc wood lathe machine, etc.
Besides cnc machines, we also supply original Yako drivers and Leadshine drivers to support our customers.
Leadshine series we have these models:
DMA860H
DM856
DM542-05
DM442
DM1182
Yako series we have:
YKD2608MH
YKA2811MA
If any other requests, also can contact with us. We will do our best to support you.
Microstep Driver Leadshine MA860H DM1182 Stepper Motor Driver
Tips: Another good choice on driver is YAKO stepper motor driver.
Features of MA860H stepper driver:
1) Good high speed performance
2) Output voltage is Max. 80VAC
3) Output current is Max. 7.2A
4) Self-adjustment technology
5) Pure-sinusoidal current control technology
6) Pulse input frequency is up to 300 KHz
7) TTL compatible and optically isolated input
8) Automatic idle-current reduction
9) 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
10) Suitable for 2-phase and 4-phase motors
11) Support PUL/DIR and CW/CCW modes
12) Short-voltage, over-voltage, over-current and short-cicuit protection
Food Powder packaging machine with bag making function, Nuts packing machine ,Spices powder packing machine ...more information pls contact us .
This machine is equipped with a dual CPU microcomputer control system a 5inch LCD display in Chinese or English a userfriendly operation interface automatic cursor detection and tracking and simpler operation Equipped with highprecision stepper motors to ensure the accuracy of the cutting position of each packaging bag
Performance Adopting a straight screw feeding method to prevent direct adjustment of packaging weight during the packaging process without the need for shutdown effectively improving work efficiency Optional devices such as coding machine lower blade round corner punching inflation exhaust and vacuum can be installed
Usage This machine is suitable for automatic measurement and packaging of powders such as milk powder coffee soy milk powder sesame paste lotus root powder dyeing powder seasoning powder medicinal powder etc
Paramters
Packing speed 3080bagsmin
Bag length 30300mm
Bag width 40430mmopen film width
Weight 400kg
Power 25Kw
Packing volume 501000ml
Machine size 820x1220x2000
Packing type back sealing
2-head packaging machine (also can 4-18head according different capacity choice)
Packaging speed 15bags/min
Bag length 90-320mm
Bag width 80-210mm
Overall weight 400kg
Power 1.8kw/220v
Packaging capacity 20-1000ml
Outer packaging size 820 x1220 x 2500mm
Packaging form Back sealing
This machine is an intelligent weighing automatic quantitative packaging machine with four scales and microcomputer control. Suitable for quantitative packaging of granular materials such as miscellaneous grains, nuts ,pesticides, fertilizers, veterinary drugs, premixes, additives, laundry detergent, salt, monosodium glutamate, white sugar, seeds, rice, snacks, hardware, etc.
Performance characteristics:
1. High precision digital sensors enable precise measurement to be achieved instantly.
2. The microcomputer control system is technologically advanced, easy to operate, and more reliable to use.
3. Fast and slow vibration feeding, automatic correction of errors, achieving high-precision packaging.
4. Four scales work alternately, with fast packaging speed.
5. High quality stainless steel is used for the material contact part, which is anti-corrosion, dust-proof, and easy to clean.
Host configuration:
This machine is equipped with a dual CPU microcomputer control system, a 5-inch LCD display in Chinese or English, a user-friendly operation interface, automatic cursor detection and tracking, and simpler operation. Equipped with high-precision stepper motors to ensure the accuracy of the cutting position of each packaging bag.
The d2hb882mb is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved.
Features
Low cost and good high-speed torque
14 selectable resolutions
Supply voltage up to +80vdc
Suitable for-2-phase and 4-phase motors
Output current up to 5.86a
Dip switch current setting 8different values
Optically isolated input signals
Pulse frequency up to 200khz
Automatic idle-current reduction
Small size (107*97*48), weight:1kg
2427 Yako Leadshine Driver For Cnc Stepper Motor Suppliers
Short on time? Let Yako Leadshine Driver For Cnc Stepper Motor sellers contact you.
The d2hb542ma is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved.
Features
Low cost and good high-speed torque
Supply voltage up to +45vdc
Output current up to 5.86a
Optically isolated input signals
Automatic idle-current reduction
14 selectable resolutions
Suitable for-2-phase and 4-phase motors
Dip switch current setting 8 different values
Pulse frequency up to 200khz
Dip switch current setting 8 different values
Small size (122.2*90*33), weight:0.3kg
SD-2H086MB
Features
Low cost and good high-speed torque
14 selectable resolutions
Supply voltage up to +80VDC
Suitable for-2-phase and 4-phase motors
Output current up to 5.86A
Dip switch current setting 8different values
Optically isolated input signals
Pulse frequency up to 200KHz
Automatic idle-current reduction
Small size (107*97*48),Weight:1KG
SD-2H044MA
Features
Low cost and good high-speed torque
Supply voltage up to +45VDC
Output current up to 5.86A
Optically isolated input signals
Automatic idle-current reduction
14 selectable resolutions
Suitable for-2-phase and 4-phase motors
Dip switch current setting 8 different values
Pulse frequency up to 200KHz
Dip switch current setting 8 different values
Small size (122.2*90*33),Weight:0.3KG
Q2HB88M
Features
(1) High performance, low price
(2) Two group 32 channels constant angel and constant torque subdivision. Highest subdivision: 480
(3) The motor phase current is reduced to set current value 100 ms after receiving the last pulse edge
(4) Bipolar constant current chopping circuit
(5) Opto-isolated input/output
(6) Driven current is adjustable continuously from 0.5A/phase to 8A/phase (0.4A/phase to 6.4A/phase)
(7) Single power supply, voltage arrange from DC24/V to 80V (DC40V to130V)
(8) Highest response frequency: 200Kpps
(9) Over voltage protection, overheat protection, over current protection
PMD006P3E is a kind of micro integrated stepper motor microstepping driver, which can be directly installed in the rear 42/57/86 etc series stepper motor, and which has the advantages of small size, strong driving force, and low heat and so on. PMD006P3E stepping motor driver can provide 0~6 continuous adjustable peak current, maximum 128 microstepping, free current which can be adjusted continuously.
We are a manufacturer and can manufacture products according to our customer's design.
Currently we are looking for qualified stocking distributors with competitive price and good discount in the world for mutually beneficial long-term relationship. We try our best to support our distributors and business partners to develop more market percentage.
Please join us, let's create the glorious future together!
Q2hb34ma is a constant angle and constant torque stepper drive. The drive voltage range from dc12v to 40v. It can match 2-phase hybrid stepper motors whose rated current is under 3a and shaft diameter range from 42mm to 86mm. Owe to bipolar constant chopping circuit, it can make motors low noise, operated smoothly. It is widely used in the small size of numerical control device with higher resolution such as carving machine, laser labeling machine, inner laser curving machine and etc.
Features
high performance, low price
4 channels constant angel and constant torque subdivision, the highest subdivision: 64
highest response frequency: 200kpps
the motor phase current is reduced to approximately 50% of the set current value 100ms after receiving the last pulse edge
bipolar constant current chopping circuit
opto-isolated input/output
driven current is adjustable continuously from 0.5a/phase to 3a/phase
single power supply, voltage arrange from dc12 to 40v.
DM420 drive, and 42BYGH stepper motor with the use of
Brand: ACT
Product type: DM420 type DM420 type subdivision driver of two phase hybrid stepping motor drive, with 12 ~ 36V DC power supply, suitable for driving voltage of 24V ~ 36V, current is less than 2.0A diameter 42 ~ 57 mm two-phase hybrid step motor. The current loop driver adopts AC servo drive subdivision control, motor torque fluctuation a small, low speed operation is very smooth, almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, CNC machine tools, packaging machinery demand higher resolution devices.
I. overview
DM420 type subdivision two-phase hybrid stepper motor drive, with 12 ~ 36V DC power supply, suitable for driving voltage of 24V ~ 36V, current is less than 2.0A diameter 42 ~ 57 mm two-phase hybrid step motor. The current loop driver adopts AC servo drive subdivision control, motor torque fluctuation is small, low speed operation very smooth, almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, CNC machine tools, packaging machinery demand higher resolution devices.
1 average current control, two phase sinusoidal current drive output
2 DC 12 ~ 36V power supply
3 opto isolated signal input / output
4, overvoltage, undervoltage, overcurrent, interphase short-circuit protection function
5, eight files subdivision and automatic half flow function
6, eight files output phase current setting
7 has the offline command input terminal
8 the torque of the motor is related to its speed, irrespective of the number of steps the motor has to rotate
9 high starting speed
10. high speed torque
Input voltage DC 12 to 40V input
The input current is less than 2 Amperes
The output current is 0.44A to 2.83A
Power dissipation: 40W
The working temperature is -10 to 45 degrees; the storage temperature is between -40 and 70 centigrade
Moisture can not dew or water
Gases are prohibited from flammable gases and conductive dust
Weight 70 grams
Electric motors are essential components used to convert electrical energy into mechanical motion, powering a wide range of applications from household appliances to industrial machinery. Available in various types such as AC, DC, and stepper motors, they are known for their efficiency, reliability, and long lifespan. Electric motors are used in manufacturing, transportation, robotics, HVAC systems, and more, providing smooth, consistent performance with minimal maintenance requirements.
Cloudray motor provides a range of 2-phase stepper motors and stepper motor driver with frame sizes from NEMA 17,NEMA 23,NEMA 24, NEMA 34. Cloudray stepper motor and Stepping Motor Driver are widely used in engraving machine, cutting plotter, textile machine, 3D printer, medical devices,stage lighting equipment, robot, CNC machine, music fountain and other industrial automatic equipment.
High Torque, High Precision and Long life is Cloudray's core advantages
Stepper Motor characteristic:
Low vibration,Low heating, No loss of step
Fast Response,Better Acceleration Performance
Higher Resolution Avoidance of Resonance Regions
Sturdy structure, extremely long life
High quality materials including bearings and shaft made in Japan
Short length and light weight allow them to be used in highly integrated systems
ISO 9001, CE, RoHS international quality certification, reliable products.
DM542 drive, and 57BYGH stepper motor with the use of
Brand: ACT aincot
Product type: DM542 type DM542 type subdivision driver of two phase hybrid stepping motor drive, with 18 ~ 50V DC power supply, suitable for driving voltage of 18V ~ 50V, a two-phase hybrid step current is less than 42~86 mm diameter 4.0A stepper motor. The current loop driver adopts AC servo drive subdivision control, torque ripple of motor is small, low speed operation is very smooth, almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, CNC machine tools, packaging machinery demand higher resolution devices.
I. overview
DM542 type subdivision two-phase hybrid stepper motor drive, with 18 ~ 50V DC power supply, suitable for driving voltage of 18V ~ 50V, a two-phase hybrid step current is less than 42~86 mm diameter 4.0A stepper motor. The current loop driver adopts AC servo drive subdivision control, motor torque fluctuation is small, low speed running smoothly and almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, CNC machine tools, packaging machinery demand higher resolution devices.
1 average current control, two phase sinusoidal current drive output
2 DC 24 ~ 50V power supply
3 opto isolated signal input / output
4, overvoltage, undervoltage, overcurrent, interphase short-circuit protection function
5, fifteen files subdivision and automatic half flow function
6, eight files output phase current setting
7 has the offline command input terminal
8 the torque of the motor is related to its speed, irrespective of the number of steps the motor has to rotate
9 high starting speed
10. high speed torque
Input voltage DC 18 to 50V input
The input current is less than 4 Amperes
The output current is 1.0A to 4.2
Power dissipation: 80W; internal insurance: 6
The working temperature is -10 to 45 degrees; the storage temperature is between -40 and 70 centigrade
Moisture can not dew or water
Gases are prohibited from flammable gases and conductive dust
Weight 200 grams
Dm860 type subdivision two-phase hybrid stepper motor drive, with 24 ~ 80v dc power supply, suitable for driving voltage of 24v ~ 80v, current is less than 8.0a diameter 57 ~ 110 mm two-phase hybrid step motor. The current loop driver adopts ac servo drive subdivision control, motor torque fluctuation is small, low speed operation very smooth, almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, cnc machine tools, packaging machinery and other high requirements on the equipment.
I. Overview
Dm860 type subdivision two-phase hybrid stepper motor drive, with 24 ~ 80v dc power supply, suitable for driving voltage of 24v ~ 80v, current is less than 8.0a diameter 57 ~ 110 mm two-phase hybrid step motor. The current loop driver adopts ac servo drive subdivision control, motor torque fluctuation is small, low speed operation very smooth, almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, cnc machine tools, packaging machinery and other high requirements on the equipment.
1 average current control, two phase sinusoidal current drive output
2 dc 24 ~ 80v power supply
3 opto isolated signal input / output
4, overvoltage, undervoltage, over-current, overheating, interphase short-circuit protection
5, fourteen files subdivision and automatic half flow function
6, eight files output phase current setting
7 has an offline signal transmission terminal
8 high starting speed, high speed torque
I. Electrical parameters
Input voltage
Dc 24 ~ 80v input
Power dissipation: 80w; internal insurance: 10a
Temperature
The working temperature is -10 to 45 deg c; the storage temperature is between -40 and 70 deg c
No dew, no water
Flammable gas and conductive dust are prohibited
Weightabout 500 grams
Nema 34 bipolar stepper motor for cnc router
Homepage: www.Eaglecnctec.Com
Features of nema 34 step motor model. 85bygh450a /86bygh450a
Currency 4a
Step angle 1.8â°
Phase two
Holding torque: 21kg/cm =2n.M = 285 oz-in
Shaft diameter: 12.7 / 14mm
Net weight: 2.4kg
Features of bipolar stepping motor model. 85bygh450b /86bygh450b
Currency: 5a
Step angle: 1.8â°
Phase: two
Holding torque: 60kg/cm =5.88n.M =840 oz-in
Shaft diameter: 12.7 / 14mm
Net weight: 3.5kg
-
2427 Yako Leadshine Driver For Cnc Stepper Motor Suppliers
Short on time? Let Yako Leadshine Driver For Cnc Stepper Motor sellers contact you.
