Find Verified Overhead Bridge Crane Suppliers, Manufacturers and Wholesalers

Industrial Crane Konecranes CTX 10 t, Dual Bridge with 33.6 m span

The crane was manufactured by Konecranes Oyj in 2001 and the operation was stopped in year 2006. The equipment was regularly serviced by the manufacturer and is thus in excellent operating condition. The crane is still installed in its original place and can be tested on any time. The double bridge is welded housing construction equipped with one double speed wire hoists and a motorized rail equipment on both ends. The crane has both the local wire connected control unit as well as the wireless remote controller. On the bridge there is a service platform and the local LV û and control cabinet. All electric motors are dimensioned in accordance with Industrial Heavy Duty ED classification. The equipment includes the crane moving rail which will be sold separately.

Technical data:
Manufacturer's type:CXTD10t x 33.6m Hol: 6.1m
Lifting capacity:10 000 kg
Span distance:33.55 m
Lifting class:FEM M5 (2m)
Bridge structure:Welded case
Total weight:Approx 22 000 kg
Type of wire hoist:XL 404N40BDA4
Lifting height:6.1 m
Lifting speeds:8.0 and 1.3 m / min
Wire hoist speeds:32 and 8 m / min
Bridge speed:Inverter controlled, max 40 m / min
Wire hoist lifting motor:Double power 15 and 2.5 kW (60% ED)
Wire hoist moving motors:2 x 0.65 kW (40% ED)
Bridge moving motors:2 x 1.8 kW (40% ED)
Total power need:19.9 kW / 400 V / 50 Hz
Crane moving rail:60 x 40 cm, length 2 x 140 m.

Manufacturer: Hitachi Plant Mechanics
Year: 2017
Model: Overhead Crane Hoists
Rated load: 20 t Test: 25 t
Lifting load: 20.28 t
Lift: 18.495 m (FL plus 10.995 m, FL minus 7.5 m)
Span: 28.7 m
Winding: 0.125 m / s , 30 kw (inverter control)
Traverse: 0.3 m / s , 1.8 kw (inverter control)
Driving: 0.75 m / s , 2 x 5.5 kw (inverter control)
Power supply: 3-phase, 3 wire, 440 v, 60 Hz
Traverse rail: 22 kg / m rail
Traveling rail: 73 kg / m rail

We could offer you another crane with similar specifications.

Shuttle Stacker Crane Storage system, utilizes the stacker crane to work as both shuttle carrier and lift, thus achieving a highly efficient space usage solution, with the help of shuttles and conveyors under the control of WMS and WCS, all working together for fully automatic warehouse operation for higher-density storage.

Product Features:

Stackers carry out the longitudinal and vertical handling while shuttles completing the lateral handling among the rack channels
Conveying lines complete handling towards entrance/exit ports
WMS and WCS control handling equipment to achieve fully automatic inbound and outbound operations

CIRK-F Series create a stylish office space in which the changes of modern and various color are attempted on most basic manuals consisting of office space starting from the desk to cabinet, cabinet combined with drawers, multi-cabinet, locker and screen board by future-oriented design containing unique design of Woodmetal(Light grey, Pink noche, Dark Noche, Beech, Cherry).

A mobile crane is an industrial piece of equipment used to easily transport cargo and building materials, and with modern advancements, these type of cranes can lift near enough anything


Please contact us for more details

Supply Ability: 20 units per Month
Weight(KG): 420000 kg
Condition: New
Rated Lifting Moment: 2009kN.m
Place of Origin: China
Warranty: 1 Year
Engine Brand: Imported
Hydraulic Pump Brand: Imported
Hydraulic Cylinder Brand: Imported
Max. Lifting Height: 58.1m

Feature: TRUCK CRANE
Certification: CE/ISO9001
Warranty of core components: 1 year
Brand Name: XCM GIZOOMLION
Video outgoing-inspection: Provided
Marketing Type: New Product
Core Components: Engine
Hydraulic valve brand: Imported
Application: construction
Rated Loading capacity: 50ton

Machinery Test Report: Provided
Packaging Detail: Export standard packaging

Sungsan Corporation is a leading supplier of new and used construction equipments such as Excavator, Wheel loader, Truck crane, Crawler crane, Dozer, Air compressor, Crushers, Concrete batching plant, Cement-block making plant, etc.

We are also supplying spare part (Roller, Idler, Pump, Teeth, Valve, Filter, etc)
We have been in business since 1991 in the international market.

Model : Z30SS
Year : 1992/2
Maker : Tadano
S/N : FA-1237

Engineering, transport, health, security, environmental quality-hseq, heavy machinery

A crane is a heavy-duty lifting machine used to lift, lower, and move materials horizontally and vertically using ropes, cables, hydraulic systems, and hoists.

Type of Crane :
Tower Crane (construction)
Mobile Crane (truck-mounted / rough terrain)
Overhead Crane (factories, warehouses)
Gantry Crane (ports, shipyards)
Crawler Crane (heavy lifting & infrastructure

Lifting Capacity : 1 ton - 1,000+ tons
Crane Height : 10 m - 300+ m (tower cranes)
Working Radius : 3 m - 80+ m
Power Source : Diesel / Electric / Hybrid
Hoisting Speed : 5 - 120 m/min (varies by model)
Slewing Speed : 0.5 - 2 rpm
Control System : Cabin / Remote / PLC automation
Duty Class : ISO A3 - A8 (industrial classification)
Structure Material : High-tensile steel

BRIDGE RECTIFIER
INSEL Rectifiers India manufactures high quality and cost-effective bridge rectifier, which provides full wave rectification from an AC power source for electronic equipment. Our line of bridge rectifiers can complete your electronic equipments power and case style requirements.

Rectifiers An electrical circuit used to convert AC into DC current. A rectifier is a diode that causes the current to flow in only one direction. The output of the rectifier is essentially half-AC current, which is then filtered into DC.

Bridge Rectifier A bridge rectifier makes use of four diodes in a bridge arrangement to achieve full-wave rectification. This is a widely used configuration, both with individual diodes wired as shown and with single component bridges where the diode bridge is wired internally.

Bridge Rectifier Advantage The main benefit of bridge rectifier over conventional full-wave rectifiers is that with a given transformer, the bridge rectifier generate a voltage output that is nearly twice that of conventional full-wave circuit. Another benefit of bridge rectifier is the low ratio of peak inverse voltage to average output voltage.

A half-wave rectifier is a circuit that allows only one half-cycle of the AC voltage waveform to be applied to the load, resulting in one non-alternating polarity across it. The resulting DC delivered to the load â??pulsate significantly.

Bridge Rectifiers
Three Phase Bridge Rectifier Modules (MDS)
Three Thyristor Welding Modules (Non Isolated Base)
Bridge Rectifiers (Single Phase Square Type)
Bridge Rectifiers (Three Phase Square Type)
Moulded Rectifiers For Generators (Three Phase)
Mono Block Bridge Rectifiers (Single Phase)
Mono Block Bridge Rectifiers (Three Phase)

Welcome to Insel Rectifiers: Your Premier Destination for Superior Power Solutions
Step into the world of Insel Rectifiers, where pride is taken in being a leading Bridge Rectifier manufacturer, dedicated to providing advanced power solutions. With a history marked by innovation and an unwavering commitment to excellence, we proudly hold our place as pioneers in the industry. Our specialization lies in the production of Bridge Wave Rectifiers, Full Wave Bridge Rectifiers, and Half Wave Bridge Rectifiers, making us your trusted source for diverse and high-quality rectifier solutions.

With a trusted reputation in the industry, our Bridge Rectifiers are meticulously engineered to uphold the highest standards of quality and reliability. Our unwavering commitment to technological advancements guarantees that our products consistently deliver superior performance. This dedication positions us as the top choice for industries seeking dependable and powerful solutions for their power needs.

Excel, The Leading Manufacturer And Seller Of Gym And Fitness And Play Equipments In India.

Excel, The Leading Manufacturer And Seller Of Gym And Fitness And Play Equipments In India.

Excel, The Leading Manufacturer And Seller Of Gym And Fitness And Play Equipments In India.

M812 "bridge trucks" are 5-ton

It consists of nickel plated brass strips and connecting pieces with 4mm socket terminals, fitted on wooden base. Length 100cm long with plastic scale. Supplied with jockey.

(Wheatstone Bridge) One meter long, provided with four gaps/ two gaps, plywood base and sunmica top, graduated scales, constantan wire is streched on top of meter scale brass C.P. Strip aend gaps can be closed by removable brass strips and brass terminals are provided to reduce resistance.
With Pencil Jockey
With pressing Jockey Brass

The Radio Remote Control is designed with advanced technology these design satisfies all requirements in diverse industries, its programmable systems are suitable for different function settings applied in various equipment.

Radio Remote Control can befitted as standard device for various Material Handling Equipment applications such as Overhead Crane, Bridge Crane, Jib Crane, Tow Truck, Truck Tail, Concrete Pump Truck, Tower Crane, Gantry Crane, Monorail, Hoist, Lifting equipment, Conveyor, Furnace Door Gate, Construction machineries.

Features :
Low Power Consumption.
Transmitter and Receiver are Programmable: All the functions can be configured and modified by simply using its Program. On Windows base to meet a several of applications. (Inching, interlock, non-interlock, normal, toggle etc.)
Standard modules with interchangeable parts assembly.

Goliath Cranes/Gantry Cranes

Manufacturer & Exporter of Goliath Cranes& Semi Goliath Crane. Our product range also comprises of Press Brake Machines, EOT Cranes and JIB Crane.

With 2rm commitment to quality we are manufacturing and supplying a comprehensive range of Goliath Crane.

Features :

Sturdy Construction
High load bearing strength
Rust proof

Specifications :
Standard span:18m,22m,26m,30m,35m
Max. Lifting Height:30m
Span :10-50m

Tadano Mercedez-Benz truck crane. Lifting capacity 300 tons.