Find Verified Laser Marking Machine Suppliers, Manufacturers and Wholesalers

The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.

Features of Laser Marking Machine Evan

EVAN laser provides a fast, flexible and efficient way to permanently mark a wide variety of materials such as Metals, Plastics, Ceramics, Silicon etc.

Features

• First and last pulse equally useable
• Bitmap marking compatible.
• High repeatability/stability design.
• Status monitoring and safe shut down.
• High speed marking (MHz repetition rate).
• Long using time: the average using time more than 100000 hours
• Good stability and free maintenance: No need to maintenance for laser advice High quality gray scale marking

Technical Specifications of Laser Marking Machine Evan 20

Model No. : EVAN-20
Laser average output power: 10 W
Wavelength: 1064 nm
Power Adjustment: 0 to 100 %
Cooling: Air Cooled
Min. Line: Width Min. 0.03 mm (Depend on Material)
Max. Speed: Max. 10000 mm/s (Max. Linear Speed)
Marking Depth : 0.01~0.3mm (Depends on Material)
Min Character Height : 0.5mm
Marking Range : 145 mm X 145 mm(Standard)
Optional : 175 X 175 mm & 300 X 300 mm
Supporting Format : Support PLT, DXF, BMP File etc., Using SHX TTF Character Storage Directly
Marking Area : 145 x 145 (standard) 175 x 175 / 300 x 300 (Optical)
Single Pulse Energy (mj) : 1 to 20KHz
Repetition Frequency Range : 20-80 KHz
Output Power Stability : < 3%
Beam Quality(M2 ) : < 1.5
Pulse Width(ns) : < 130 to 20 KHz
Power Supply : DC 24 Volt AC 220 Volt
Max Power Consumption : 200 Watt


Application : Fast, flexible and efficient way to permanently mark a wide variety of materials such as Metals, Plastics, Ceramics, Silicon, Auto Parts, Hardware, Watch & Clock, Marking anodized & painted material, Serial Numbers, Manufactures Information, Barcodes, Logos, Packaging, Solar Industry, Medical Device, Marking Metal & Plastics, Data Codes, Materials Flow, 2D Data Matrix, Graphics and more.

Category
Miscellaneous
Manufacturer
Gutenberg
MODEL
FC-50G
YEAR
2021

DESCRIPTION:
FC-50G CO2 lasers offer consistent, high-quality marking on many types of materials on the production line, including plastics, ceramics, rubber, paper and fiber products. CO2 laser marking systems are designed for easy integration into production lines and automation cells with their sturdy cabinets, rotating marking heads, and internet-ready controls.

Advantages
1. High precision and fast speed. Marking depth is controllable optionally.
2. Wide application. It can mark most non-metals.
3. No consumption and pollution.
4. The marking lines are clear, it can withstand heavy wearing.
5. English software. The software works in Windows environment and it is compatible with many file formats, for instance, PLT, PCW, DXF, BMP and others saved by CORELDRAW, AUTOCAD, PHOTOSHOP and other software. Meanwhile, SHX and TTF can be imported into the software directly.

Marking and Engraving FC-50G is suitable for laser marking and surface-engraving.
This laser machines apply precise, permanent and abrasion-proof marks on nearly every material by Annealing, Color Change/Frothing, Color/Material Removal, Carbonizing or Surface-engraving.
CO2 laser marking machine adopts CO2 RF laser and high-speed scanning galvanometer system imported from the United States. It is equipped with high quality optical devices, high stability laser power supply and automatic control system.

Category
Miscellaneous
Manufacturer
Gutenberg
MODEL
FG-20/30/50T
SIZE
650x1400 mm.
YEAR
2021
Laser ring engraving machine is a new generation laser marking system developed with the world's most advanced laser.
Jewelry laser marking electromechanical light conversion efficiency is extremely high with high reliability. The laser ring engraving machines overall size is small.

Advantages
1. Laser ring engraving machine can work continuously for 24 hours without consumables. More than 10,000 hours service time can meet long-term and stable work requirements.
2. Gold laser marking machine equipped with special rotary system to support mark on ring.
3. Laser ring engraving machine powerful software compatible with Coreldraw, AutoCAD, Photoshop and other software files.
4. The gold laser marking machine structure has been greatly improved: the optical system adopts a fully sealed structure with a red light preview function, a more beautiful appearance and a more convenient operation.
5. The photoelectric conversion efficiency is high, the beam quality is good, the lines are fine, the spot is small, and the laser has long service life.
6. The laser ring engraving is equipped with the latest precision constant temperature chiller, low operating noise and high temperature adjustment accuracy.
7. Jewellery laser marking machine high-speed scanning galvanometer, suitable for industrial mass production. No mechanical stress, small thermal stress, no damage to the processed material, no deformation. To maintain your best jewelry effect

FLY CO2 Online Fiber Laser Marking Machine

CATEGORY
Miscellaneous
MANUFACTURER
Gutenberg
MODEL
FC-20F/30F/50F
SIZE
800x1060 mm.
YEAR
2021



DESCRIPTION:
More professional industrial CO2 Fly high stability laser machine.

CO2 lasers typically used for beverage bottles including PET, PVC, and also for marking packaging card and clear glass.

Fly CO2 capable of marking products on faster production lines or with more complex coding or substrate requirements such as metals like steel and aluminum, and medication blister pack printing.

Advantages
- Laser Technology Refined
Application of the system can fully or partially replace the traditional inkjet coding, especially for the new material which inkjet cannot coding and remain permanent traceable code.

- LCD Touch Screen
Software installed on the LCD touch screen. The marking speed, power, frequency... all can be adjusted on the screen. It s very convenient.

- Scanner Head
Adopt advanced digital high speed scanning, galvanometer, small volume , quick speed, good stability, performance reached the international advnaced level.

- High Quality Alloy Case
The laser source, controller card and other electric circuits all setup in the case. Also there are exhaust fan in the case.

- Lifting Handle Design
Shake Hand Wheel
Laser Focus Distance can be adjusted easily. Operation is simple and convenient

Fly Fiber Laser Marking Engraving Machine

CATEGORY
Miscellaneous
MANUFACTURER
Gutenberg
MODEL
FG-30/50/100F
SIZE
420x130 mm.
YEAR
2021
AVAILABILITY
2021-10-15

DESCRIPTION:
Flying Fiber Marking Machine is especially suitable for users requiring mass production and marking in food packaging, pharmaceutical packaging, cigarette code, wine industry, mineral water, daily cosmetics, wires and cables and various production lines. Using imported fiber laser and customized marking conveyor belt can achieve the goal of rapid marking, and increase the processing capacity per unit time, improve the benefit conversion rate.

Advantages
1. On-line flying optical fiber marking machine can realize the marking work of large-scale production line. It adopts a special split structure. The laser head has the function of automatic induction. When the work piece passes through the laser head, it will automatically mark.
2. Optional high-quality conveyor belts can be selected for on-line flying optical fiber marking machine to meet the needs of various users.
3. Convenient bracket can adjust the distance between upper and lower conveniently, meet the marking requirements of different work pieces, one machine is multi-purpose.
4. On-line flying optical fiber marking machine adopts imported optical fiber laser, which is of good quality and can be processed stably for 24 hours continuously.
5. High photoelectric conversion rate, zero consumables.
6. Simple operation, the operator can skillfully start in one day.
7. Online Flying Fiber Marker supports 2D coding and supports any computer operating system and languages.

3KW CNC Fiber Laser Cutting Machine ? 3015Professional industrial fiber laser cutting machine designed for high-precision sheet metal cutting, stable performance and continuous production.Main Specifications:? Model: LF3015LN? Working Area: 3000 Ã? 1500 mm? Laser Power: 3KW? MAX Fiber Laser Source ? International Version? Raytools BM111 Cutting Head? CypCut Control System with Nesting Software? INOVANCE Servo Motor & Driver? Computer Control System? Power Supply: 380V / 50Hz / 3 Phase? 50KVA Voltage Stabilizer? 15KW Inverter Air Compressor? Air Compressor Pressure: 1.6MPaCustomization Available:Machine color, accessories, spare parts and configuration can be customized according to buyer requirements.Suitable for professional metal fabrication workshops, sheet metal processing factories, steel fabrication and industrial manufacturing.MOQ: 1 SetFOB Price: USD 34,000?39,000 / SetLoading Port: Qingdao Port, ChinaFinal price depends on selected configuration, accessories and buyer requirements.Contact us with your required material type, maximum cutting thickness and preferred configuration for a detailed quotation.

Product Details:
Eco Friendly : YES
Usage & Applications : Stationery/ Gift Wrapping/ Box Packaging
Tape Type : PVC Floor Marking Tape
Material : PVC
Color : Multicolor
Tape Length : 5Y 5m 10Y 10m Meter (m)
Tape Thickness : 0.3 - 2 Micrometers (um)
PVC Floor ; Marking Tape Price And Quantity
Price : 47 INR/Piece
Minimum Order Quantity : 50 Box

PVC Floor Marking Tape Product Specifications

Tape Type : PVC Floor Marking Tape
Color Multicolor : Usage & Applications Stationery/ Gift Wrapping/ Box Packaging
Eco Friendly : YES
Tape Length : 5Y 5m 10Y 10m Meter (m)
Tape Thickness : 0.3 - 2 Micrometers (um)
Material : PVC
PVC Floor Marking Tape Trade Information
Supply Ability : 5000 Box Per Month
Delivery Time : 15 Days
Main Domestic Market All India
Thickness : 130 micron - 170 micron
Single Color : Red/white/blue/yellow/green/orange etc
Double Color : White & green/red & white/yellow & black
Application : Warning and marking of harardous area

UV-3A/UV-5A/UV-10A/UV-5AS/10w UV laser
DAT UV laser printer offers marking solutions with seamless integration, superior code quality, and durable quality for unmatched production reliability.

The seamless integration can greatly save space and is very friendly to manufacturers with small factories.

Permanent and high-contrast codes enable product lifetime track and trace for pharmaceutical, medical device, and cosmetic products.

Features of 3w UV laser marking machine
01
The focusing spot is extremely small: the wavelength of the ultraviolet laser is 355nm, and the diameter of the focusing spot can be less than 3�¼m, which can achieve ultra-fine marking.

High contrast: Good beam quality, clear and fine marking, meeting the precision processing needs of the high-end market.

Stable performance: Advanced optical system and control technology are adopted to ensure the consistency of the marking effect.

Low energy consumption: Low power, low power consumption, and low operating cost.



02
No thermal effect: Ultraviolet laser breaks the chemical bond of the material through photochemical reaction, and there is almost no heat-affected area in the processing process, avoiding material coking, deformation, and other problems, and is especially suitable for heat-sensitive materials.

No mechanical stress: Non-contact machining reduces physical damage to the material and maintains the integrity of the workpiece.

No pollution: No ink or other chemicals are required; the marking process is environmentally friendly and pollution-free.

Special material processing: Suitable for the surface marking of cosmetics, drugs, and food packaging bottles; the effect is fine and firm, which is better than ink printer.

03
Applicable to a variety of materials: Markable metals, non-metallic and polymer materials, such as glass, ceramics, plastics, silicon wafers, flexible PCB boards, LCD LCD glass, etc.

Features of Elita 32

• Special design of carriage where 2" lens or 5" lens both can be used. 5" lens gives you better quality of cutting, if the thickness of material is more than 10mm and 2" lens should be used for cutting media less than 10mm thickness.
• High quality touch panel display - very easy to use
• Pass through design for long length of work piece in Y-axis direction
• Machine is provided with foot-mounting legs so that there is no vibration in machine and machine can be adjusted on zero level
• As it is made in India, No waiting period for spare parts & quick service support
• Machine is provided with heavy duty compressor which has Air-assist combining adjustable focus systems in coaxial jet air to prevent cutting edge from burning down
• Laser cut software with window based software enhance cutting speed and angel / curve performance
• Laser seals the edges of fabric while cutting
• Maximum cutting thickness of acrylic - 20mm
• High quality of chillier unit for better performance and long life of laser tube

Technical Specifications of Elita 32

X, Y Cutting Area : 3' x 2' (918 x 610 mm)
Laser Power : 80W
Travelling Speed : 0.1 to 400 mm/s
Reposition Accuracy : ±0.025mm
Minimum Letter Size : 1 mm (English Font)
X Y Movement System : Linear guide way
Z - Axis Movement : Manual
Power Adjustment : 0.1 to 100%
Maximum Cutting Thickness : Up to 20mm Acrylic
Driving System : Stepper Motor
Operating System : Windows XP, Windows 7 32bit
Interface : USB interface
Supported Format : PLT, AI, DXF, BMP
Working Voltage : Single Phase 220V/50Hz (Require Earthing)
Running Environment : 45°C, Humidity 5% - 80%
Operating Display : Touch Panel
Memory Buffer : 100 MB (Max. 33 Files)
Overall Dimension : 1200 x 1780 x 1060 mm
Weight : 243 Kg
Power Consumption : 2 KW


Application : Acrylic Engraving, Acrylic Cutting, Paper Cutting, MDF Cutting, and more.

Features of Elita-21

Elita 21 is with high speed USB and offline control system, the split frame structure, working is stable and reliable, and it has wide range of application and economical – utility model. Elita 21 is of high accuracy, fast, stable performance, simple operation and easy maintenance. Elita 21 can engrave and cut variety of non-metallic materials like Acrylic, MDF, Paper, Fabric, Leather etc. Elita 21 is best for Letter Cutting, Trophy and Awards, Plaques, Gifts, Photo Album Cover etc.

Technical Specifications of Elita-21:

Model ELITA-21
Working Area 600 x 400 mm
Laser Type Sealed-off Glass CO2 Laser Wavelength : 10.6um
Laser Power 60 W
Laser Tube Cooling Water Cooling
Control System and Driver High Speed DSP Control System, Stepper Motor, High Sub division driver
Engraving Speed 0-900 mm/s
Cutting Speed 0-400 mm/s
Reposition Accuracy <±0.01 mm
Minimum Letter Size 1 mm (English Fonts)
Machine Power =1000 W
Supported Format and Software PLT, DST, DXF, BMP, AI, Support AutoCAD, CorelDraw output directly
Working Environment Temperature: 0-45°C. Humidity: 5%-95% (No condensed water)
Voltage AC220V/110V±10%, 50HZ/60HZ


Application : Acrylic Engraving, Acrylic Cutting, Paper Cutting, MDF Cutting, and more.

Features of Elita-480

X, Y Axis adopt round rail and belt transmission to make machine more stable
Stable and full equipped design concept, equipped with advanced industrial cooling system with anhydrous alarm automatic protection system, improve the stability and safety of continuous work. Full-equipped dust, anti-pollution exhaust system, more attention to environmental protection.

Perfectly Cutting Material

• 30 mm Acrylic
• 10 mm MDF

Technical Specifications of Elita-480

Model : LIBRA-480
Laser Tube : 60, 80 , 100, 130, 150, 180 Watt
Power Working Area : 4 x 8 Feet
Laser Type : CO2, Sealed Laser Tube, Wavelength 10.6um
Cooling System : Water Cooling
Power Adjustment : 0-100% Stepless Control, 0-100% Adjustable in Software
Control and Driving : High Speed DSP Control, Stepper Motor High Subdivide Driving
Engraving Speed : 0-70000 mm/min
Cutting Speed : 0-18000 mm/min
Working Voltage : AC220V/110V ±10% 50Hz/60Hz
Position Accuracy : =± 0.01mm
Consuming Power : = 2000 W
Running Environment Temperature : 0-45°C. Humidity: 5%-95% (free of condensed water)
Supported Format: PLT, DST, DXF, BMP, and AI. Support AutoCAD, CorelDraw output directly


Application : Acrylic Engraving, Acrylic Cutting, Paper Cutting, MDF Cutting, and more.

Features:

• Special design of carriage where 2" lens or 5" lens both can be used. 5" lens gives you better quality of cutting, if the thickness of material is more than 10mm and 2" lens should be used for cutting media less than 10mm thickness.
• High quality touch panel display - very easy to use
• Pass through design for long length of work piece in Y-axis direction
• Machine is provided with foot-mounting legs so that there is no vibration in machine and machine can be adjusted on zero level
• As it is made in India, No waiting period for spare parts & quick service support
• Machine is provided with heavy duty compressor which has Air-assist combining adjustable focus systems in coaxial jet air to prevent cutting edge from burning down
• Laser cut software with window based software enhance cutting speed and angel / curve performance
• Laser seals the edges of fabric while cutting
• Maximum cutting thickness of acrylic - 20mm
• High quality of chillier unit for better performance and long life of laser tube

Technical Specifications of Elita 43:

X, Y Cutting Area : 4' x 3' (1220 x 918 mm)
Laser Power : 80W
Travelling Speed : 0.1 to 400 mm/s
Reposition Accuracy : ±0.025mm
Minimum Letter Size : 1 mm (English Font)
X Y Movement System : Linear guide way
Z - Axis Movement : Manual
Power Adjustment : 0.1 to 100%
Maximum Cutting Thickness : Up to 20mm Acrylic
Driving System : Stepper Motor
Operating System Windows XP, Windows 7 32bit
Interface : USB interface
Supported Format : PLT, AI, DXF, BMP
Working Voltage : Single Phase 220V/50Hz (Require Earthing)
Running Environment : 45°C, Humidity 5% - 80%
Operating Display : Touch Panel
Memory Buffer : 100 MB (Max. 33 Files)
Overall Dimension : 1525 x 1920 x 1100 mm
Weight : 332 Kg
Power Consumption : 2 KW

Application : Acrylic Engraving, Acrylic Cutting, Paper Cutting, MDF Cutting, and more.

Features of Erina 100

• Based on laser tube beam design, this system direct accept the beam of laser tube, without the beam expander, highly improves the optical light transmittance.

Technical Specifications of Erina 100

Laser Power : 100 W (Rf / Metal laser Tube USA) Water cooled
Laser Energy Regulator : 0 to 100%
Field size (mm) : 300 x 300 400 x 400 450 x 450 500 x 500 600x 600
Working Distance (mm) : 350 450 500 550 660
Speed : 5000 mm/sec
Motion Control : 3 Axis Dynamic Galvano System Meter System
Graphic Format Supported : AI, BMP, JPG, PLT, DFX, DST, DWG
Power supply : AC 220 V ± 5% / 50 Hz / 60 Hz
Working Environment : 15 ° C - 30 °, Humidity : 30-80%


Application : Major Cutting & Engraving on paper (Thin & Thick), Fabric, Jeans, Leather, PU and dot marking on Acrylic, LGP (light guide plate) and more.

Features:

• 4 Axis laser Welding
• High magnification system
• Adjustable waveform
• Uses military grade water tank
• Imported compressor
• Pulsed laser power supply
• Internal Microcontroller

Technical Specification

Model : Galaxy:3400A-500W
Whole Power Consumption : 12KW
Laser Wavelength: 1064nm
Laser Power : 200W-650W
Laser Point : Size>=0.15mm
Laser Type Nd : YAG
Repeating Frequency : 1- 200Hz
Positioning Accuracy : 0.01mm
Working Table : 300*300mm(Customization)
Sight Positioning : CCD Monitor (Standard Configuration)
Four Axis : X Y Z C Axis
The Diameter of Rotation Axis : 40mm
Focus Length : 200mm
Note: *Also available in 250W (1200 x 1200mm working area)


Application : Multi-function laser welding machine

PRODUCT DETAILS
A pair of black round-toe flats, has regular styling, slip-on closure
Synthetic upper with laser cuts
Cushioned footbed
Textured and patterned outsole

Material & Care : Synthetic
Wipe with a clean, dry cloth to remove dust

Specifications

Type : Ballerinas
Toe Shape : Round Toe
Fastening and Back Detail : Slip-On
Pattern : Solid
Occasion : Casual
Ornamentation : Laser Cuts
Ankle Height : Regular
Sole Material : Rubber

PRODUCT DETAILS
A pair of gunmetal-toned round-toe flats, has regular styling, slip-on detail
Synthetic upper with laser cuts and bow detail
Cushioned footbed
Textured and patterned outsole

Material & Care : Synthetic
Wipe with a clean, dry cloth to remove dust

Specifications

Type ; Ballerinas
Toe Shape : Round Toe
Fastening and Back Detail : Slip-On
Pattern : Solid
Occasion : Casual
Ornamentation : Laser Cuts
Ankle Height : Regular
Sole Material : Rubber

Portable Fiber Laser For Big Size - Metal Marking And Etching

CATEGORY : Miscellaneous
MANUFACTURER : Gutenberg
MODEL : FG-20/30/50H
SIZE : 200x500 mm.
YEAR : 2021

* Portable Fiber Laser Etching machine adopts the third generation solid-state fiber laser to create the superfine effect of marking. This model is a small compact structure, with no pollution, no optical power coupling loss, air-cooling, high efficiency, and stability. The software is easy to use and can work with any content such as graphics, charters, letters, barcodes, QR codes, etc. It can widely be used in various metal and some non-metallic surfaces to create a permanent mark.

Advantages
1. Compact and portable: this laser marker with small size, light weight, laser marking machine is easy to carry, galvanometer can be rotated 90 degrees according to the requirements, this laser marker is suitable for side marking and pipeline work.
2. Desktop and handheld design: this laser marking machine with removable fixed bracket, to meet a variety of marking needs.
3. Fixed automatic focusing bracket: the laser-marking machine adopts fixed automatic focusing bracket, and the laser marker is flexible and convenient to use.
4. Laser beam stabilization: laser stability, small loss, free from the outside dust and mechanical impact, laser marker beam stability.
5. The laser marker is maintenance-free, no supplies, and no need to adjust or clean the lens.
6. The laser marker processing speed is 2-3 times of the traditional laser-marking machine.
7. The spot quality of laser marker is excellent and the peak power is high, and the best marking effect can be achieved in the same material.
8. Using automatic lift platform, integrated air-cooled system, integrated design; the appearance of laser marker is simple and beautiful

Product name: Marking machine

Detailed product parameter description:

Product model: marking machine

Marking Machine

Features of Gloria-510F

• FSCUT closed – loop control loop
• Powerful hardware configuration
• CYPCUT Software
• Start processing immediately without waiting
• Fast & practical scanning cutting
• BCS100 height controller

Technical Specifications of Laser Engraving Machine Gloria Series

Model: GLORIA-510F
Working Area: 4 x 8 Feet 5 x 10 Feet
Laser Type: Imported Original Fiber Laser
Laser Wavelength: 1070 nm
Laser Output Power: 300w / 500W / 750W / 1000W / 1200W
Cutting Thickness 0.2-5 mm
Max. Cutting Speed : 30000 mm/min (Adjustable according to different cutting thickness)
Position Accuracy : = ± 0.04 mm
Minimum Line Width : = 0.12 mm
Cooling System : Water Cooling
Driving System : MITSUBISHI / YASKAWA Servo motor and Drivers
Transmission : X axis with imported ball screw, Y axis is imported square rail
Working Voltage : 380V / 220V
Total Power Consumed : 9 KW

Application : Fast cutting on plate or tube in metal, mainly for cutting on SS, Carbon steel, Manganese steel, galvanized plate, alloy plate, rare metal. Widely used in kitchen appliance, electric control box, high-resolute device, mechanical equipment, hardware and metal processing.