This Hydraulic Pump A4VSO71DR/30R-PPB13N00 can replace REXROTH A4VSO71DR/30R-PPB13N00
Product Features:
1. Axial piston pump with swashplate design for hydraulic drive in open circuit
2. Optional installation location
3. Excellent oil absorption characteristics
4. Low noise level
5. Long service life
6. Modular design
7. Short response time
8. Variable speed drive options
9. Visible swing angle indicator
10. The flow rate is proportional to the input transmission speed and displacement. By adjusting the swashplate angle, the output flow can be steplessly adjusted.
11. Use of HF oil in the case of reduced operating data There is a special model that can be used to run with HFC oi
Packaging & Shipping:
Packaging details: Standard export wooden case or as your requirements
Delivery details: 28 days after payment
Our products support wholesale, we will provide more discounts if ordering 2 sets or more.
Please contact us, thank you very much.
We offer replacement Rexroth Piston Pumps and Pump Spare Parts.
Suitable for high-capacity hydraulic pump
Attachable to both sides of the front and rear of the engine
Directly attachable with pump pad
Extend extract port with external gearbox (Option)
SAE C D pumps are available (if required, needs processing).
SAE C D adaptor provided
Application
Workboats that use high-capacity hydraulic accessories
Diesel power unit system
The hydraulic enema/ sausage machine is the main equipment for processing intestinal products, which can fill all kinds of large, medium and small intestinal products. The machine is driven by piston type hydraulic pressure. Under the action of the hydraulic cylinder, the materials in the cylinder will be squeezed out after the pressure is generated by adjusting the working pressure. The upper part of the machine is equipped with a storage hopper and butterfly valve, which can realize continuous filling without lifting the cover and improve the working efficiency
The hydraulic enema/ sausage stuffer machine / sausage filler machine is the main equipment for processing intestinal products, which can fill all kinds of large, medium and small intestinal products. The machine is driven by piston type hydraulic pressure. Under the action of the hydraulic cylinder, the materials in the cylinder will be squeezed out after the pressure is generated by adjusting the working pressure. The upper part of the machine is equipped with a storage hopper and butterfly valve, which can realize continuous filling without lifting the cover and improve the working efficiency.
Capacity 150-300kg , 1.5kw .
O ring, seal, mechanical seals, seal kits, hydraulic breaker, drilling machinery and construction machinery spare parts and components, crushing and screening spare parts..
Plunger Type Pumps, Hydraulically Actuated Diaphragm Type Pumps, Mechanically Actuated Diaphragm Type Pumps, Solenoid, Operated Diaphragm Dosing Pumps, Complete Skid Mounted Dosing Systems, Chemical Process Pumps, Seal free Magnetic Drive Pumps, Progressive Pumps, Y Type Strainers, Pulsation dampners, etc.
V4 Borewell Submersible Pumpset
Falcon Premium 100 mm (4) Borewell Submersible pump is firmly coupled to a submersible electric motor and Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosive resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and
Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
Power Range : 0.37 kW to 4.4 kW (0.50 HP to 6.0 HP)
- Version : Single Phase 160V to 230V, Three Phase 350 to 415V, 50Hz AC Supply.
Single Phase available in 0.5 HP to 5.0 HP
Three Phase available in 1.0 HP to 6.0 HP
- Speed : 2880 RPM
- Head Range : 10 Mtr. To 340 Mtr.
- Discharge Range : 450 LPM to 12 LPM
- Outlet Size in Inch : 1.0 , 1.25, 1.5 & 2.0
- Degree of Protection : IP 58
- Direction of Rotation Minimum Cooling : Counter clockwise from driving end -1ph: Electrically Reversible -3ph
- Thrust Load : 0.37 kW â?? 0.75 kW- 650 lbs, 1.1 kW -1.5 kW -1000 lbs,
2.2kW, 7.5 kW -1500 lbs.
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR): 3ph
Direct Online (D.O.L)
- Maximum Starts Per Hour : 20 Times
Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m�²/sec (max.)
- Ph Value : 6.5 to 8.5
V3 Borewell Submersible Pumpset
Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Power steering system consists of a cylinder, a pump and handle. The oil is pressured from hydraulic pump and a
handle(orbitrol) control a cylinder.
The cylinder helps rudder move and the required oil is supplied from the hydraulic pump.
Cylinder is classified Single, Rotary, Twin, Two rudders by torque and appearance
Pump is classified Pulley type drived by engine and Power unit drived by electric motor
We offer 7 kinds of handles with various appearance and functions.
Features
Narrow handle diameter helps you operate with small energy and power steering system offers light operation
On where you put the handle, the rudder is fixed
Structure that the rudder does not rotate even when the tide power the rudder
When engine stops, manual steering is capable (Handle becomes heavy)
You can choose the combination fit to your vessel
Application
Vessel above 350 HP
A wide range of vessel from fishing boat to ferry
Electric steering system is equl with the power steering system equipped a solenoid valve.
It is the system which steers with solenoid valve by comparing resistance values of electric handle and rudder angle sensor
It consists of a cylinder and a pump, an solenoid valve and a electric handle.
The cylinder makes the rudder move and the pump supplies the oil to the cylinder. Handle is to swap the direction of hydraulic pressure
Cylinder is classified Single, Rotary, Twin, Two rudders by torque and appearance
Pump is classified Pulley type drived by engine and Power unit drived by electric motor
We offer 7 kinds of handles with various appearance and functions.
You can choose the combination fit to your vessel
Key features
Narrow handle diameter helps you operate with small energy and power steering system offers light operation
The number of rotation wheel is 2.8 like the hydraulic handle
Analogue type of a indicator for handle and a rudder angle indicator are applied.
Controlled by Joystick / Autopilot
USB port
Autopilot can be used together.
Application
Vessel above 350HP
A wide range of vessel from fishing boat to ferry
The moog radial piston pump, also known as rkp, has served the industrial market for over two decades and is widely known for its robust and reliable design. Moog demonstrates its commitment to this product line by offering product improvements such as low noise and compact designs, while offering rapid response times and high volumetric efficiencies.
Hydrolic pump repair and reconditioning, and we are manufacturing spare parts like piston sets, distributors, servo pistons, servo chambers, cylinder blocks for rkp type pumps.
Engine Brand WEICHAI
Power 75 KW, 60 KW, 55 kw, 70 KW
Other attributes
Applicable Industries Building Material Shops, Manufacturing Plant, Food & Beverage Factory, Farms, Construction works
Showroom Location Germany
Condition Used
Place of Origin Germany
Type Backhoe Loader, Front Loader, Mini Loader, Skid Steer Loader
Warranty 1 Year
Machine Weight 4380 kg
Hydraulic Pump Brand POCLAIN
UNIQUE SELLING POINT High load Moment
Machinery Test Report Provided
Video outgoing-inspection Provided
Marketing Type New Product 2019
Warranty of core components 1 Year
Core Components Engine, Gear, Motor, Pump, Gearbox
Brand Name SKID LOADER
Moving Type Wheel Loader
Dimension(Long * Breadth * High) 5
Hydraulic Cylinder Brand POCLAIN
Hydraulic Valve Brand POCLAIN
