Find Verified Aluminum Bars Suppliers, Manufacturers and Wholesalers

Cmmdity: Aluminum Fluride (Aluminium fluride)
ther name: Aluminum trifluride
Frmula:AlF3
M.W.:83.98

Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released.

Specificatin:

grade chemical cmpsitin % Physical character
F Al N2 Fe2342- P25 LI Bulk dity g/cm3

AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5
AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3
AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7
AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7
Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc.

Brief Intrductin f the Prductin Technics
In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water.

Packaging
packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.

Origin: Japan
Code: 20261018LD
Material: Aluminum Dross 60% recovery
Category: Aluminum
Type: Dross 60% recovery
Quantity: 50 Tons
Loading weight: 25 Tons
Specification:
Aluminum Dross -60% recovery
2 ~3 fcl per month

Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?

1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?

We can supply Aluminum Scrap of 30 series and 60 series from Korea.
We kindly ask your company to actively review this opportunity for your market.
If there is genuine interest, we will be ready to provide our price offer based on your required terms.
Please let us know your specific needs, and we will revert with detailed information including price, quantity, and shipping terms.

Aluminum Color Coated Coils

1) Alloy: 1050, 1060, 1100, 3003, 3004, 3005, 3105, 5005, 5052, 5083, 5754
2) Temper: Various status
3) Thickness: 1.0-4.0mm
4) Width: 50-2300mm
5) Weight: 2.0-2.5 tons per pallet
6) Length: 1000-6000mm
7) Frontispiece Painting: PVDF & PE (Brand: PPG)
8) Frontispiece guarantee: Coating guarantee for 20 years.
9) The Thickness of the Baffle Paint: The thickness of paint coating is 30u.
10) Face Slab For Film: Adopt PVC film, thickness for standard is 60u (can be negotiated if the client need higher thickness)
11) Color Requirements: Could according to the color board of color number of the client offer.
12) Gloss Requirements: Could do it from 20% to 60% according to the gloss request of the client
13) Dimensions and weight can be produced according to clients' specifications.
14) Applications: construction, decoration, air-conditioner and radiators,package

Water chemical

Product Description

Aluminum plate is the thickness of above 0.2mm to below 500mm, more than 200mm width, length within 16m aluminum material called aluminum plate or aluminum sheet, below 0.2mm for aluminum,200mm width within the bar or bar. Aluminum plate refers to the rectangular plate made of aluminum ingot rolling, which is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium thick aluminum plate and pattern aluminum plate.

Product Name : Aluminum plate

Price range : $350-$900 The price is favorable if the quantity is large

Minimum order quantity : 1 ton

Specifications : Thickness 0.2-500mm, width 200-1500mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade 10502A123003505260617075

Test

Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test.

Product

certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bendingï¼?stamping

Surface treatment : Passivation Chromated, Oiled, Unoiled.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : South Africa: Zambia, Angola, Zimbabwe, Malawi, Mozambique

East Africa: Ethiopia, Eritrea, Somalia, Djibouti, Kenya, Uganda

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Packing and shipping

Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

Colorless or white crystal. Insoluble in water, insoluble in acids and bases. It is very stable and can be hydrolyzed when heated. Mainly used in aluminum smelting. It can be prepared by the action of aluminum trichloride and hydrofluoric acid and ammonia.

It is mainly used to adjust the molecular ratio in aluminum electrolyzing bath as a flux. The anhydrous AlF3 supplied by our company an reduce environmental pollution;improve the production yield of aluminum smelters, and lower its electrolytic cost.

ROLETTINI WAFER BARS

Crispy wafer bars filled with different creams:

* Hazelnut Cream

* Milk Chocolate Cream

Real gourmet delicacies harmonize with the crunchy wafer.
Due to their individual cello packaging can be served on airplanes, or tea houses, coffee bars, in vending machines, etc.

Weight: 45 g

Shelf life: 12 Months

High-quality aluminum scrap sourced from industrial and post-consumer recycling. The material is clean, sorted, and free from excessive contamination, making it suitable for remelting, casting, and secondary aluminum production. Available in various grades including UBC, Tense, Taint/Tabor, Aluminum Wheel Scrap, and Mixed Aluminum Scrap. Bulk quantities are supplied with consistent quality and timely delivery for domestic and international buyers.

* Aluminum is a silver-white metal that is the third most abundant in the Earth's crust after oxygen and silicon. The density of aluminum is 34.61 percent that of iron and 30.33 percent that of copper, so it is also called light metal. Aluminum is the world's output and consumption are second only to steel non-ferrous metal. Aluminum has a density of only 2.7103g/cm, about one-third that of steel, copper, or brass. Because of its light material, aluminum is often used in the manufacture of cars, trains, subways, ships, aircraft, rockets, spacecraft and other land, sea and air vehicles to reduce weight and increase loading capacity.

Product Name : Aluminum ingot

Price range : $1000-$3000 Preferential prices are available for large orders

Minimum order quantity : 1 ton

Material : 1000 Series--8000 Series

Steel Grade : 1050106011002A16LY162A02LY6

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test.

certification : ISO,SGS,BV,TUV,

Delivery Condition : Forged +Rough Machined (Black Surface)

Application scenario : Application scenario,Residential Construction,Mining Infrastructure

Processing Service : Welding, Drilling, Cutting, Bending

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Southeast Asia: Thailand, Malaysia, Brunei

Europe: Finland, Sweden, Ireland, Netherlands

Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.

AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.

Alloy grade

Silicon Si

Iron Fe

Copper Cu

Manganese Mn

Magnesium Mg

Chromium Cr

Zinc Zn

Titanium Ti

Zirconium Zr

other

Aluminum AL

new grade

old grade

0.40

0.40

0.10

0.5-0.8

5.8-6.8

0.20

0.02-0.10
each total
5A06
LF6

0.05

0.15

margi

5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.

AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.

Alloy grade

Silicon Si

Iron Fe

Copper Cu

Manganese Mn

Magnesium Mg

Chromium Cr

Zinc Zn

Titanium Ti

Zirconium Zr

other

Aluminum AL

new grade

old grade

0.40

0.40

0.10

0.5-0.8

5.8-6.8

0.20

0.02-0.10
each
total

5A06

LF6

0.05
0.15

margi

Name : Aluminium Roofing Sheet
Standard
JIS G3141,DIN1623,EN10130
Material
1050,1060,3003, 3A21,5052.5005.5083.5A05,6061

Sheet
0.15 mm- 2.0mm
Normal sheet
2.0mm-6.0mm

Medium plate

6.0 mmt-25.0mm

Plate

25mm-200mm

Super thick plate

Customizable according to customer needs

Packing

Export standard packing or according to customers requirement

Certificate

ISO9001:2008,SGS

Shipment

Within10-15 workdays,25-30days when the quantity beyond 1000tons

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Parameter

Product Name : Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications

Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.
certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Aluminum coil is a kind of metal plate, melted by aluminum ingots, plus different alloys, through casting or rolling or hot rolling, cold rolling, annealing, transverse shear and other processes into aluminum coil, aluminum coil has low density, light weight, easy to handle, can be strengthened, plasticity, good thermal conductivity. So widely used in power plant and chemical plant pipeline insulation, heat exchanger, evaporator, heating appliances, cooking utensils and so on.

Product Name : Aluminum coil

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications

Thickness 0.1-10mm, width 600-1500,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTMB209 JIS H4000 EN573 GB/T3880

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test.

Product : certification

ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending,
Stamping,Embossing

Application : Roof , car building,curtain wall, Shelter ,oil tank,mould

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Southeast Asia: Philippines, Vietnam, Laos

Northern Europe: Finland, Sweden, Norway, Iceland

South Africa: Zambia, Angola, Zimbabwe

Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Products Description Type: 1000~7000 series
Aluminum Bar Standard: ASTM B221M, GB/T 3191, JIS H4040,etc. Grades a) 1000 Series: 1050�¯�¼?1060�¯�¼?1070, 1100, 1200, 1235, etc. b) 2000 Series: 2A12, 2014, 2024 etc. c) 3000 Series: 3003, 3004, 3005, 3104, 3105, 3A21, etc. d) 4000 Series: 4045, 4047, 4343, etc. e) 5000 Series: 5005, 5052, 5083, 5086, 5154, 5182, 5251, 5454, 5754, 5A06, etc. f)6000 Series: 6061, 6063, 6082, 6A02, etc. g) 7000 Series: 7075, etc. Diameter: 5.5 -800mm, or as required Length: 2m,3m,5.8m,6m, or as required Common Thickness: 0.15mm - 10mm, as Your Request OEM Service: Perforated, Cutting special size, Doing flatness, Surface treatment, etc.

Classification : Copper Bar
Copper bar is a kind of non-ferrous metal processing bar, has better processing performance, high conductivity. Mainly divided into brass rod (copper zinc alloy, less expensive), purple copper rod (higher copper content).

Classification : Incoloy Alloy
Incoloy Bar is a nickel-iron-chromium alloy with molybdenum and copper Incoloy Bar Sheet has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking and to pitting and crevice copper Incoloy Bar is Especially resistant to sulfuric and phosphoric acids.

Classification : Hastelloy Alloy
Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.

Classification : Hastelloy Alloy
Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.

Classification : Hastelloy Alloy
Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.