Find Verified Knitted Gloves Suppliers, Manufacturers and Wholesalers

Surgical Gloves are disposable protective gloves designed to maintain hygiene and prevent cross-contamination during medical and clinical procedures. They act as a critical barrier between healthcare professionals and patients, helping ensure a sterile environment in surgical and examination settings.

These gloves are manufactured using high-quality materials such as natural rubber latex, nitrile, or polyisoprene, depending on usage requirements and sensitivity considerations. They are engineered to offer high tactile sensitivity, allowing precise hand movements during delicate procedures. The surface is typically micro-textured or fully textured to enhance grip, even in wet or slippery conditions.

Surgical gloves are individually packed in sterile pairs to preserve cleanliness and prevent contamination before use. They are anatomically shaped for left and right hands, ensuring a natural fit and reducing hand fatigue during extended use. The cuffs are beaded to provide secure wearing and prevent roll-down during procedures.

Key Specifications:

Material: Latex, nitrile, or synthetic polymer-based compounds
Product Type: Sterile, single-use surgical gloves
Design: Anatomically shaped (left and right hand specific)
Surface: Micro-textured or textured for improved grip
Sterility: Pre-sterilized and individually packed
Powder Option: Available in both powder-free and lightly powdered variants depending on requirement
Thickness: Optimized balance between durability and tactile sensitivity
Elasticity: High flexibility for comfortable extended wear
Cuff Design: Beaded cuff for secure fit and easy donning
Usage: Suitable for surgical procedures, clinical examinations, and laboratory handling

These gloves are designed to minimize the risk of infection transmission while maintaining comfort and precision. Their durability and flexibility make them suitable for long-duration surgical tasks, ensuring reliable performance throughout medical procedures.

Surgical Gloves are disposable protective gloves designed to maintain hygiene and prevent cross-contamination during medical and clinical procedures. They act as a critical barrier between healthcare professionals and patients, helping ensure a sterile environment in surgical and examination settings.

These gloves are manufactured using high-quality materials such as natural rubber latex, nitrile, or polyisoprene, depending on usage requirements and sensitivity considerations. They are engineered to offer high tactile sensitivity, allowing precise hand movements during delicate procedures. The surface is typically micro-textured or fully textured to enhance grip, even in wet or slippery conditions.

Surgical gloves are individually packed in sterile pairs to preserve cleanliness and prevent contamination before use. They are anatomically shaped for left and right hands, ensuring a natural fit and reducing hand fatigue during extended use. The cuffs are beaded to provide secure wearing and prevent roll-down during procedures.

Key Specifications:

Material: Latex, nitrile, or synthetic polymer-based compounds
Product Type: Sterile, single-use surgical gloves
Design: Anatomically shaped (left and right hand specific)
Surface: Micro-textured or textured for improved grip
Sterility: Pre-sterilized and individually packed
Powder Option: Available in both powder-free and lightly powdered variants depending on requirement
Thickness: Optimized balance between durability and tactile sensitivity
Elasticity: High flexibility for comfortable extended wear
Cuff Design: Beaded cuff for secure fit and easy donning
Usage: Suitable for surgical procedures, clinical examinations, and laboratory handling

These gloves are designed to minimize the risk of infection transmission while maintaining comfort and precision. Their durability and flexibility make them suitable for long-duration surgical tasks, ensuring reliable performance throughout medical procedures.

Disposable nitrile medical examination gloves suitable for hospital, clinical, and healthcare use. Powder-free, latex-free, and ambidextrous design. Available in multiple sizes (S, M, L, XL).

Products are sourced from verified manufacturers and comply with international quality standards. Packaging and branding can be customized subject to order quantity.

Suitable for medical examination, laboratory use, and general healthcare applications. Bulk supply available for international buyers. Certifications and test reports can be provided upon request

Premium Japanese Technology Performance Fabric

100% Polyester Tricot Knit Fabric

Product Overview

This premium-performance fabric is manufactured using advanced Japanese textile technology and is engineered to provide exceptional comfort, durability, and easy maintenance.

Designed for both fashion and workwear, it combines the appearance of woven fabric with the flexibility of knitted construction, making it suitable for garments that require comfort, elegance, and long-lasting performance.



Key Features

100% Polyester

* High-strength synthetic fiber
* Long service life
* Excellent color retention
* Lightweight construction
2-Way Stretch

* Stretch in both length and width
* Improved freedom of movement
* Comfortable for daily wear

Superior Breathability

* Allows continuous airflow
* Reduces heat buildup
* Keeps the wearer cool throughout the day
Moisture Wicking & Quick Dry

* Absorbs perspiration efficiently
* Dries rapidly after washing
* Suitable for hot and humid climates

Wrinkle Resistant

* Maintains a clean appearance
* Helps garments retain their shape
* Ideal for travel and business wear

Easy Care

* Machine washable
* Low maintenance
* Minimal ironing required

UV Protection

* Blocks a high percentage of harmful UV rays
* Suitable for outdoor use

Dimensional Stability

* Resists shrinkage
* Maintains garment shape after repeated washing

Soft Yet Structured

* Comfortable against the skin
* Provides a premium, elegant drape


Recommended Applications

Suitable for manufacturing:

* Arabic Thobes
* African Kaftans
* Men's Shirts
* Women's Fashion
* Uniforms
* Corporate Wear
* Medical Apparel
* Hospitality Uniforms
* Sportswear
* Jackets
* Lightweight Trousers
* School Uniforms

Advantages

* Premium Japanese textile technology
* High-performance knitted construction
* Long-lasting durability
* Fast production capability
* Suitable for both small and bulk orders
* Consistent quality standards
* Available in multiple colors
* Excellent sewing performance
* Premium appearance with everyday comfort

Latex-Examination Gloves, Prepowdered
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:

Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one-half of each dentin disc was subjected to Vickers microhardness (n = 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Latex material mixture
Strength Sleeve (min): 0.12-0.14
Strength Palme (min): 0.17-0.19
Strength Finger (min): 0.18-0.20
Tensile Strength: 6N min (before aging), 6N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Acc. *Loery Method 18,9 ug protein /g of glove Acc. *HPLC Method 10,9 ug protein /g of glove
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4, ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers
Packing: Hygienically packed in a dispenser, 100 pieces each, 1000 pieces in each carton
Special Remarks: Not suitable for dangerous materials (especially aggressive materials)

Size Length Width
S 240-250 80-85
M 240-250 90-95
L 240-250 100-105
XL 240-250 110-115

Latex-Surgical Gloves, Prepowdered
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:
Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one half of each dentin disc was subjected to Vickers microhardness (n = 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Latex material mixture
Strength Sleeve (min): 0.22 min
Strength Palme (min): 0.26 min
Strength Finger (min): 0.32 min
Tensil Strength: 9N min (before aging), 9N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Acc. *Loery Method 18,9 ug protein /g of glove Acc.
HPLC Method 10,9 ug protein /g of glove
Sterilization: Ethylene Oxide
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4 ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers
Packing: Wrapped by 1 pair in a cleanroom of class C, every 50 pairs are packed in box of 50 pairs, then in a 500-pairs carton


Size Length Width
6.5 280-290 80-85
7 280-290 90-95
7.5 280-290 100-105
8 280-290 110-115
86.5 280-290 115-120

Yellow cow grain leather driving gloves designed for comfort, durability and reliable hand protection. Featuring a keystone thumb, Gunn cut and unlined design for better dexterity. Suitable for driving, handling, warehouse, maintenance and general industrial work. Available in sizes 8-11 with blue binding and polyester stitching.

Cow grain leather Canadian gloves with cream fabric on the back side, designed for heavy-duty material handling, construction, mining, loading and unloading, transportation and general industrial work.

Cow grain leather driving gloves with 0.9-1.0 mm leather, Gunn cut and keystone thumb for comfort, flexibility and durability. Unlined design offers excellent dexterity. Available in sizes 8-11.

Cow split leather welding gloves designed for Industrial application.

All new clips, 80% are solid colors and easy sortable into family shades. Material is packed in big bales 450kg each.

Advantages:

Consists of clean, new fine wool and synthetic knitted textile clips.
Suitable as a secondary raw material for textile recycling and fiber recovery.
Soft textile material with good fiber characteristics, depending on composition.
Can be sorted by material, color, and fabric type for specific processing requirements.
Suitable for spinning mills, textile recyclers, nonwoven manufacturers, and fiber processors.
Bulk supply and customized packing can be arranged for industrial buyers.

Material: HDPE/LDPE
MOQ: 3000,000pcs
Feature: Durable
Port: Ho Chi Minh
Colour: White or Custom
Packing: Carton or Customized
Usage: Keep cleaning,Dust-proof,etc

Origin: Japan

Code: 2025569LD

Material: Soft PVC Gloves Natural color

Category: PVC

Type: Gloves

Color: Natural color

Quantity: 200 Tons

Loading weight: 22 Tons

Specification:Soft PVC Gloves Natural color

They are unused products

Monthly supply is 200-300 tons.

Packing: Jumbo bags



Thanks for contacting us!

We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading

Could you please give us more details about your company and demand for us to offer you the suitable material?



1.What is your company name and address?

2.Have you imported this material before?

3.If yes, which is your port of destination and HS code which you use to import this material?

4.How many tons do you need per month?

5.Which grade and color are you looking for?

6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?

Safety Protection Disposable Nitrile Latex Gloves
50 pair in a box
Carton size : 60 x 50 x 27cm

Material - Nitrile Latex
Color- white, black, blue, pink, etc
Size - S, M, L, XL

Weight: 3.5-5.5grams
Length: 9.5'' and 12"
Thickness: 2.5mil-4mil

Code 72630: Suitable for bacteria-free operations in general surgical rooms, surgical wards, laboratory, cleanroom.

Features

1. Contains no natural rubber latex protein.

2. Hypo-allergenic compounds for the most sensitive hands.

3. Excellent puncture resistance.

4. Minimize hand pressure & keeping cooler, drier

Color: Blue or white

Hand former: Textured surface in the grip area, with size embossed

Sterility: Sterile or non-sterile

Size S, M, L, XL

Overall length: 245 +/- 5 mm or 290 +/- 5 mm

Code 16150: Improved treatment to allow wet hands to slip in easily.

Features

1. Triple-layered design consists of double-dipping latex technology and polymer coating.

2. Made by natural rubber latex with low protein content.

3. Excellent hand-fitting made by perfection

Color: Natural latex

Hand former: Anatomic shape, beaded/non-beaded cuff, textured surface in the grip area, with size embossed

Sterility: Sterile

Size 6.0, 6.5, 7.0, 7.5, 8.0, 8.5

Overall length: 290 +/- 5mm / or 310+/-5mm

Suitable for hairdressing, tattooing and industrial use

Features
Made by natural rubber latex.

Excellent hand-fitting.

Safe grip with textured surface, easy donning and comfort.

Color: Black

Hand former: Ambidextrous shape, beaded cuff, textured surface in the grip area

Sterility: Non-sterile

Size: S, M, L, XL

Overall Length: 245 +/- 5mm

Code 13150: Excellent hand fitting

Features

1. Made by natural rubber latex.

2. Excellent hand-fitting.

3. Safe grip with textured surface, easy donning and comfort.

4. No sensitization response conducted in conformance with ISO 13

Hand former: anatomic shape, beaded cuff, textured surface in the grip area, with size embossed

Sterility: Sterile

Size: 6.0, 6.5, 7.0, 7.5, 8.0, 8.5

Overall length: 290 +/- 5mm

Code 23630: Suitable for bacteria-free operations in general surgical rooms, surgical wards, laboratory, cleanroom.

Features
1. Made from natural rubber latex.

2. Excellent chemical-resistance compounded by special treatment.

3. Low protein level-less than 50µg/g.

4. Lowest allergen content..

5. Excellent han

Color: Natural latex

Hand former: Textured surface in the grip area, with size embossed

Sterility: Sterile or non-sterile

Size S, M, L

Overall length: 245 +/- 5 mm

Compared with conventional PVC gloves, PVC nitrile synthetic gloves can provide more durability, anti-ability, and feel softer and more comfortable.

Compared with nitrile gloves, this product has stronger anti-perspiration ability, more flexible wearing, and more price advantage.

PVC nitrile synthetic gloves are a new generation of synthetic gloves developed on the basis of the existing PVC production process. PVC nitrile mixed gloves are made by mixing PVC raw materials and nitrile raw materials, so they have the advantages of both PVC and nitrile gloves.

Suitable for medical examination, dentistry, first aid, nursing, gardening, cleaning, etc.

This product is a disposable glove. Non- toxic, harmless and tasteless.