Find Verified Kitchen Gloves Suppliers, Manufacturers and Wholesalers

Surgical Gloves are disposable protective gloves designed to maintain hygiene and prevent cross-contamination during medical and clinical procedures. They act as a critical barrier between healthcare professionals and patients, helping ensure a sterile environment in surgical and examination settings.

These gloves are manufactured using high-quality materials such as natural rubber latex, nitrile, or polyisoprene, depending on usage requirements and sensitivity considerations. They are engineered to offer high tactile sensitivity, allowing precise hand movements during delicate procedures. The surface is typically micro-textured or fully textured to enhance grip, even in wet or slippery conditions.

Surgical gloves are individually packed in sterile pairs to preserve cleanliness and prevent contamination before use. They are anatomically shaped for left and right hands, ensuring a natural fit and reducing hand fatigue during extended use. The cuffs are beaded to provide secure wearing and prevent roll-down during procedures.

Key Specifications:

Material: Latex, nitrile, or synthetic polymer-based compounds
Product Type: Sterile, single-use surgical gloves
Design: Anatomically shaped (left and right hand specific)
Surface: Micro-textured or textured for improved grip
Sterility: Pre-sterilized and individually packed
Powder Option: Available in both powder-free and lightly powdered variants depending on requirement
Thickness: Optimized balance between durability and tactile sensitivity
Elasticity: High flexibility for comfortable extended wear
Cuff Design: Beaded cuff for secure fit and easy donning
Usage: Suitable for surgical procedures, clinical examinations, and laboratory handling

These gloves are designed to minimize the risk of infection transmission while maintaining comfort and precision. Their durability and flexibility make them suitable for long-duration surgical tasks, ensuring reliable performance throughout medical procedures.

Surgical Gloves are disposable protective gloves designed to maintain hygiene and prevent cross-contamination during medical and clinical procedures. They act as a critical barrier between healthcare professionals and patients, helping ensure a sterile environment in surgical and examination settings.

These gloves are manufactured using high-quality materials such as natural rubber latex, nitrile, or polyisoprene, depending on usage requirements and sensitivity considerations. They are engineered to offer high tactile sensitivity, allowing precise hand movements during delicate procedures. The surface is typically micro-textured or fully textured to enhance grip, even in wet or slippery conditions.

Surgical gloves are individually packed in sterile pairs to preserve cleanliness and prevent contamination before use. They are anatomically shaped for left and right hands, ensuring a natural fit and reducing hand fatigue during extended use. The cuffs are beaded to provide secure wearing and prevent roll-down during procedures.

Key Specifications:

Material: Latex, nitrile, or synthetic polymer-based compounds
Product Type: Sterile, single-use surgical gloves
Design: Anatomically shaped (left and right hand specific)
Surface: Micro-textured or textured for improved grip
Sterility: Pre-sterilized and individually packed
Powder Option: Available in both powder-free and lightly powdered variants depending on requirement
Thickness: Optimized balance between durability and tactile sensitivity
Elasticity: High flexibility for comfortable extended wear
Cuff Design: Beaded cuff for secure fit and easy donning
Usage: Suitable for surgical procedures, clinical examinations, and laboratory handling

These gloves are designed to minimize the risk of infection transmission while maintaining comfort and precision. Their durability and flexibility make them suitable for long-duration surgical tasks, ensuring reliable performance throughout medical procedures.

Surgical Gloves are disposable protective gloves designed to maintain hygiene and prevent cross-contamination during medical and clinical procedures. They act as a critical barrier between healthcare professionals and patients, helping ensure a sterile environment in surgical and examination settings.

These gloves are manufactured using high-quality materials such as natural rubber latex, nitrile, or polyisoprene, depending on usage requirements and sensitivity considerations. They are engineered to offer high tactile sensitivity, allowing precise hand movements during delicate procedures. The surface is typically micro-textured or fully textured to enhance grip, even in wet or slippery conditions.

Surgical gloves are individually packed in sterile pairs to preserve cleanliness and prevent contamination before use. They are anatomically shaped for left and right hands, ensuring a natural fit and reducing hand fatigue during extended use. The cuffs are beaded to provide secure wearing and prevent roll-down during procedures.

Key Specifications:

Material: Latex, nitrile, or synthetic polymer-based compounds
Product Type: Sterile, single-use surgical gloves
Design: Anatomically shaped (left and right hand specific)
Surface: Micro-textured or textured for improved grip
Sterility: Pre-sterilized and individually packed
Powder Option: Available in both powder-free and lightly powdered variants depending on requirement
Thickness: Optimized balance between durability and tactile sensitivity
Elasticity: High flexibility for comfortable extended wear
Cuff Design: Beaded cuff for secure fit and easy donning
Usage: Suitable for surgical procedures, clinical examinations, and laboratory handling

These gloves are designed to minimize the risk of infection transmission while maintaining comfort and precision. Their durability and flexibility make them suitable for long-duration surgical tasks, ensuring reliable performance throughout medical procedures.

Disposable nitrile medical examination gloves suitable for hospital, clinical, and healthcare use. Powder-free, latex-free, and ambidextrous design. Available in multiple sizes (S, M, L, XL).

Products are sourced from verified manufacturers and comply with international quality standards. Packaging and branding can be customized subject to order quantity.

Suitable for medical examination, laboratory use, and general healthcare applications. Bulk supply available for international buyers. Certifications and test reports can be provided upon request

Latex-Examination Gloves, Prepowdered
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:

Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one-half of each dentin disc was subjected to Vickers microhardness (n = 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Latex material mixture
Strength Sleeve (min): 0.12-0.14
Strength Palme (min): 0.17-0.19
Strength Finger (min): 0.18-0.20
Tensile Strength: 6N min (before aging), 6N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Acc. *Loery Method 18,9 ug protein /g of glove Acc. *HPLC Method 10,9 ug protein /g of glove
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4, ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers
Packing: Hygienically packed in a dispenser, 100 pieces each, 1000 pieces in each carton
Special Remarks: Not suitable for dangerous materials (especially aggressive materials)

Size Length Width
S 240-250 80-85
M 240-250 90-95
L 240-250 100-105
XL 240-250 110-115

Latex-Surgical Gloves, Prepowdered
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:
Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one half of each dentin disc was subjected to Vickers microhardness (n = 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Latex material mixture
Strength Sleeve (min): 0.22 min
Strength Palme (min): 0.26 min
Strength Finger (min): 0.32 min
Tensil Strength: 9N min (before aging), 9N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Acc. *Loery Method 18,9 ug protein /g of glove Acc.
HPLC Method 10,9 ug protein /g of glove
Sterilization: Ethylene Oxide
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4 ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers
Packing: Wrapped by 1 pair in a cleanroom of class C, every 50 pairs are packed in box of 50 pairs, then in a 500-pairs carton


Size Length Width
6.5 280-290 80-85
7 280-290 90-95
7.5 280-290 100-105
8 280-290 110-115
86.5 280-290 115-120

Yellow cow grain leather driving gloves designed for comfort, durability and reliable hand protection. Featuring a keystone thumb, Gunn cut and unlined design for better dexterity. Suitable for driving, handling, warehouse, maintenance and general industrial work. Available in sizes 8-11 with blue binding and polyester stitching.

Cow grain leather Canadian gloves with cream fabric on the back side, designed for heavy-duty material handling, construction, mining, loading and unloading, transportation and general industrial work.

Cow grain leather driving gloves with 0.9-1.0 mm leather, Gunn cut and keystone thumb for comfort, flexibility and durability. Unlined design offers excellent dexterity. Available in sizes 8-11.

Cow split leather welding gloves designed for Industrial application.

Glove

Product Description
Glove
Product Features
Category:KITCHEN LINEN
Subcategory:Glove
Size:150x150cm

Specification:

Product Name: GLOVE
Price [in USD: On Selection of Number of Items
Part Number: G1
Weight: 1
Color: All
Size: 1
Details: Kitchen Gloves

Use Household Roll Towels in the kitchen, breakroom or anywhere else you need to tear a sheet quickly along the perforated edge. The two-ply construction facilitates fast spill pickup and greater liquid capacity. Towels are made Processed Chlorine-Free and from a high percentage of recycled fiber with post-consumer material that easily exceeds EPA guidelines. Each roll has 70 sheets.
Features:



Attribute
Value




Quantity
30/Case


Type
Household Paper Towels


Material
Recycled Materials


Color
White


Sheet Length
11 inches


Sheet Width
8 Inches


Roll Width
8 Inches


Ply
2-Ply


Sheets per Case
2\\,100 Sheets


Sheets per Roll
70 Sheets

15 x 25 Diamond Pattern 40 oz. Premier 100% Cotton Terry Kitchen Towel 6/Pack

Additional information


Weight
1.42 lbs


Quantity
6/Pack


Type
Kitchen Towels


Material
Cotton


Style
Diamond Weave


Color
Blue, Orange


Length
25 Inches


Width
15 Inches

Kitchen Paper Towels, 11 x 9, 2-Ply, White, 70 Sheets/Roll, 30 Rolls/Carton - Roll towels are 100% recycled for use in breakroom or janitorial services. Individually wrapped rolls for convenient and sanitary storage. Strong and absorbent, virtually lint-free. Whitened without chemicals containing chlorine, no added fragrances, hypoallergenic.


















Additional information



Weight
17.5 lbs


Dimensions
24.02 Ã?? 14.56 Ã?? 11.22 in


Quantity
30/Carton


Type
Kitchen Paper Towels


Material
Recycled Paper


Color
White


Sheet Length
9 Inches


Sheet Width
11 Inches


Ply
2-Ply


Sheets per Case
2,100 Sheets


Application
General Purpose

Perforated Paper Towel Roll, 11 x 8 1/2, 2-Ply, White, 250 Sheets/Roll, 12 Rolls/Carton - Absorbent kitchen roll towel for general cleaning in kitchens, bathrooms, offices, and industrial settings. White, embossed paper towel wipes to remove dirt, dust, grease grime, liquid, and soil. Use to soak up spills and wipe surfaces clean. Individually wrapped for maximum safety and cleanliness. Standard roll size fits in most holders. The economical choice that's perfect for light household clean up. Perforated roll that's easy to tear to suit the size of your spill.

Material: HDPE/LDPE
MOQ: 3000,000pcs
Feature: Durable
Port: Ho Chi Minh
Colour: White or Custom
Packing: Carton or Customized
Usage: Keep cleaning,Dust-proof,etc

Origin: Japan

Code: 2025569LD

Material: Soft PVC Gloves Natural color

Category: PVC

Type: Gloves

Color: Natural color

Quantity: 200 Tons

Loading weight: 22 Tons

Specification:Soft PVC Gloves Natural color

They are unused products

Monthly supply is 200-300 tons.

Packing: Jumbo bags



Thanks for contacting us!

We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading

Could you please give us more details about your company and demand for us to offer you the suitable material?



1.What is your company name and address?

2.Have you imported this material before?

3.If yes, which is your port of destination and HS code which you use to import this material?

4.How many tons do you need per month?

5.Which grade and color are you looking for?

6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?

Safety Protection Disposable Nitrile Latex Gloves
50 pair in a box
Carton size : 60 x 50 x 27cm

Material - Nitrile Latex
Color- white, black, blue, pink, etc
Size - S, M, L, XL

Weight: 3.5-5.5grams
Length: 9.5'' and 12"
Thickness: 2.5mil-4mil

Code 72630: Suitable for bacteria-free operations in general surgical rooms, surgical wards, laboratory, cleanroom.

Features

1. Contains no natural rubber latex protein.

2. Hypo-allergenic compounds for the most sensitive hands.

3. Excellent puncture resistance.

4. Minimize hand pressure & keeping cooler, drier

Color: Blue or white

Hand former: Textured surface in the grip area, with size embossed

Sterility: Sterile or non-sterile

Size S, M, L, XL

Overall length: 245 +/- 5 mm or 290 +/- 5 mm