Description
The Trusted TMR analogue input module interfaces to 40 single-ended field input devices. A wide input range and programmable thresholds allow the module to be used in most voltage or current configurations. Comprehensive diagnostic tests are performed on each input channel, including tests for out of range values and stuck at failures. Fault tolerance is achieved through Triple Modular Redundancy (TMR) within the same module for each of the 40 input channels.
The module can apply a digital filter to each input channel. Individual channels can be configured for high noise immunity (50Hz or 60Hz rejection), low noise immunity (fast response) or pass-through operation (no filtering).
Each input channel has four configurable state thresholds, which may be assigned to SOE reporting. A change of state triggers an SOE entry. The on-board sequence of events (SOE) reporting has a resolution of 1ms.
Each triplicated section of the module, referred to as a slice, conditions and measures each channel independently. Each slice is optically isolated up to 2500V dc. Each slice sends its data to a safety layer hardware voter that presents the information from all three slices to the Trusted TMR processor. When a fault is detected on a slice of the module, the Trusted TMR processor will flag the error, indicating the need to replace the module. The Trusted TMR processor will continue to use the information provided by the remaining two slices until a replacement module is available. Replacement modules can be located in a standby slot next to the module or in a designated SmartSlot with a temporary connection to the same Trusted termination assembly.
Modules may be placed in any I/O module slot in a Trusted processor chassis or expander chassis. Once the I/O module configuration is set, mechanical keying is available on all I/O modules to prevent inserting a module into an incorrect slot.
Configuration of the module is carried out using the Trusted Toolset running on an engineering workstation. Once configured and loaded into the Trusted controller, replacement modules are online educated by the TMR processor.
Features
40 TMR input channels per module.
Comprehensive diagnostics and self-test.
2500V dc optically isolation.
Digital signal filtering on a per channel basis.
Four user configurable thresholds per channel.
On-board 1ms resolution sequence of events reporting.
Hot replaceable.
Front panel status LEDs for each channel.
Module fault and status indicators.
IEC 61508, SIL 3 safety applications.
Description
The Trusted Field Termination Assembly (FTA) 24V dc Digital Input T8800 is designed to act as the main interface between a field device generating a digital signal and the Trusted TMR 24V dc Digital Input Module T8403.
Features
40 input channels per FTA.
Industry standard field device connections (2-wire).
Standard DIN rail compatibility.
Simple installation and connection.
24V dc operation.
SmartSlot connection for one to many hot replacement of input modules.
Fused field power supply per channel.
On-board LED indication field power supply integrity.
 12 Month Warranty
 100% new factory sealed
 We will track the goods until you received
 All the goods will be tested before shipment
Areas of application:
Listen Think Solve , aims to better show that Moore Technology is committed to listening to what customers need, with senior spare parts supply chain experience.
Moore Technology is committed to listening to customers' needs and, with its experience in the spare parts supply chain, is fully committed to helping customers solve their spare parts problems, so that there are no hard-to-buy spare parts for industrial automation!
Advantage series:
1 Allen-Bradley (AB) Series 1756/1747/1746 Series
2 Schneider Electric Series 140 Series
3 General Electric (GE) Series  IC693/IC697/IC695/DS200..
4 Westinghouse Series 1C/5X beginning..
5 Siemens 6DD/6DP/6ES5/6DR/6GKÂ Series
6 Bosch Rexroth  Indramat, I/O module, PLC controller, Driver Module
7 Foxboro  FBM203/204/217/231, FCP240/270
8 Bently Nevada  3500/3300/330180 Cable..
9 Triconex 3008/3511/3625/3664/3721/3700A..
10 Honeywell 51/MU/MC/TC/CCÂ beginning..
1. Introduce
-sl-a07 s provide high-performance, thermally efficient amplifier solutions. It delivers 2x20w into 8 loads or 1x40w into a 4 load.
An integrated limiting circuit prevents output clipping distortion, protects small speakers from transient voltages, and reduces power dissipation.
A thermal-foldback feature can be enabled to automatically reduce the output power at above a junction temperature of +120c. Traditional thermal protection is also available in addition to robust overcurrent protection.
It operate from a single 8v to 22v supply and provide a high 67db psrr, eliminating the need for a regulated power supply. They offer up to 90% efficiency from a 12v supply.
Filterless modulation allows it to pass en55022b emi limits with 1m cables using only a low-cost ferrite bead and small-value capacitor on each output.
Both devices feature eight-digitally-controlled gain settings.
Comprehensive click-and-pop reduction circuitry minimizes noise coming into and out of shutdown.
Sl-a01 is the new design, it is new product of digital amplifier boardú¼use smt decal of main icú¼connection is very simple.High power efficiencyú¼less heat.
2. Aplication
Power speaker
Digital product
Computer and laptop
Portable product
Wireless product
Tv, dvd and the other productíí
3. Feature
Output power: maximum 15w at rl=6 , vcc=15v, btl
Rating 10w at rl=4 , vcc=12v, btl
Power efficiency is up to 82%
Low working voltage down to 5v, high working voltage up to 15v
Thermal protection functioníí
Output pin short-circuit protectioníí
Low supply current (5ma typical at 12v)íí
Low current in shutdown mode (<1µa typical)
Separate vcc & pvcc
Class-d audio design
Components use smt decal, the board dimension is very small
Ic decal is tssop20
No external heat-sink, less heat, save heat sink cost
The current is very small
The pcb design provides both bead and lc solutions
The dimension is only 42mmíß30mmíí
1. Features
*Digital audio with 64K sampling rate and 16-bit resolution.
*Low power consumption.
*GFSK digital modulation/demodulation.
*20Hz ~ 20 KHz audio frequency response.
*90dB audio dynamic range.
*Power-on function to prevent pop noise.
*Avoiding reception errors by employing forward error correction (FEC).
*Operating at 2.4GHz ISM band with 20 selectable channels.
*-85dBm receiving sensitivity, 45dB channel rejection and Application distance up to 180 meters (L. O. S. ) with perfect reception.
2. Applications
*Car Audio /Car Speaker
*Home theater rear speakers
*Wireless speakers
*Sound Card, MP3, CD player and DVD player
*Headphone
*Ordinary sound box
3. Specification
Model NO. SOYO-WT24G01-T SOYO-WT01-R
Description Transmitter Box Receiver Box
Supply voltage 3.6-12V 2.5-3.6V
Current consumption 110mA (MAX) 40mA (MAX)
Operating temperature -25 ~ 85 degree -25 ~ 85 degree
Frequency range 2400 ~ 2524MHz 2400 ~ 2524MHz
Modulation GFSK
Channel number 20 20
Channel cpacing 4MHz 4MHz
TX Power(MAX) 20dBm(Can choose from 0dBM till 20dBM)
Input impedance >10K Ohm
Input level 2.5Vp-p (MAX)
RX Sensitivity -85 dBm (Typical)
Image rejection >30dB @ the image frequency
Output impedance < 1K Ohm
Output level 2 Vp-p (MAX)
Response 20~20KHz
Dynamic range 88dB (Typical)
SN ratio 95dB (Typical)
THD 0.1% (Typical)
Hope anyone enquire from us,pls click this sales7@nseauto.com
1. lower your support costs
2, Provide on-going availability of automation replacement parts
Quantity available: 1
Warranty: 12 months.
Lead time: 1-2 working days.
Terms of payment:T/T and Western Union.
Courier partners: DHL, UPS, TNT, FedEx and EMS.
Technical specification, manuals and data sheets
Advanced dsp algorithm monishes the influence of motion artifact
All digital-signal processing improves accuracy of low perfusion
Small size easy to be assem ble
A wealth of experience in r&d, with perfect quality in the measurement precision
Product Details
This machine is suitable for cleaning of cloth shoes, casual shoes, sports shoes and other footwear; digital control system, easy to program time; adjusted according to different footwear strong decontamination, disinfection function effectively avoid footwear yellowing in the cleaning process. Hardening, the open plastic deformation.
Technical Specifications
Dimensions (mm): 526�§536�§890
Rated voltage: 220V ~
Rated frequency: 50Hz
Input Power: 340W
