Find Verified Cow Dung For Fuel Suppliers, Manufacturers and Wholesalers

LIGHT CYCLE OIL (LCO)
Light Cycle Oil available for international bulk supply.
Product: Light Cycle Oil (LCO)
Supply: Spot and Contract
Quantity: Subject to buyer requirements
Delivery: FOB / CIF / CFR subject to destination and availability
Packaging: Bulk
Inspection: Independent inspection can be arranged subject to transaction terms.
LCO is a refinery intermediate stream that can be used as a feedstock for further processing or blending, subject to its specific quality parameters and applicable regulations.
We welcome inquiries from qualified refineries, petroleum processors, fuel blenders, traders and industrial buyers.

We supply high-quality petroleum products from trusted Middle Eastern, European, and Turkish producers, ensuring compliance with international standards.

Important Notice: Due to widespread fraud in the oil industry, our procedures are non-negotiable. No upfront payment is required. TTM (Table-Top Meeting) can be arranged before LC for qualified buyers with ICPO + POF.

Key Products & Origins:
Diesel (D2, D6) Origin: Middle East
EN590 Origin: Italy, Europe, Turkiye, Middle East
Jet Fuel (Jet A1) Origin: Middle East
Our UAE office is a licensed petroleum exporter, ensuring seamless transactions and full regulatory compliance.

Sales & Purchase Procedure:

Request: Buyer submits Letter of Interest + Proof of Funds (POF) (Bank Statement, BCL, etc.).
Introduction: Seller verifies the buyer and conducts an introductory call.
Capability Assessment: Seller assesses the buyer's financial capacity.
Corporate Offer: Seller issues a Formal Corporate Offer (FCO) with prices, volume, and terms.
Sales Agreement: Buyer & Seller finalize a Sales & Purchase Agreement (SPA). The seller also issues an MFPA (Master Fee Protection Agreement) for agents/mandates.
Banking & Collateral: Buyer submits SBLC MT760, and Seller provides a 2% Performance Bond.
Loading & Documentation: Seller loads the vessel at their own cost and issues delivery documents (B/L, Ullage Report, COO, Q88, etc.).
Delivery & Payment: Buyer conducts a Dip Test, completes an MT103 wire transfer, and receives Title of Ownership upon payment.
We ensure reliable supply, competitive pricing, and seamless transactions for our global buyers.

Hallo
Good day
we supplying Jet Fuel A 1 and EN 590 10 PPM and 50 PPM - Origin Kazhakstan and other Non sanctioned Countries Very genuine refinery - we have on going contracts - Long chain brokers please dont contact unless have direct contact with END buyer or Buyer Mandate - Need ICPO from direct buyer to refinery we assure best price and mark up ( conditional )
we can provide TTV, TTT, TTO , CIF , FOB

Hallo
we supplying EN 590 10 PPM and 50 PPM AND Jet fuel A 1 - Origin Kazhakstan
Very genuine refinery - we have on going contracts - we work with 4 legit sellers
Only serious buyers who can provide ICPO with BCL
Supply capacity - 700-1000 K per month
Long chain brokers please dont contact unless have direct contact with END buyer
Need ICPO from direct buyer to refinery
we assure best price and mark up ( conditional )

We, Alma International Trading FZE, are able to supply Aviation Fuel For Gas Turbine Engines (JET-A1) as below:

AVIATION FUEL FOR GAS TURBINE ENGINES (JET-A1)
SHIPMENT: CIF FUJAHIRA /FOB ROTTERDAM - HUSTON
ORIGIN: RUSSIAN or EUROPEAN
PRICE QUOTE: ON REQUEST BY EMAIL ONLY
MIN QTY: 500,000.00 BBLS
MAX QTY: 5,000,000.00 BBLS

Please read carefully before making a request.

Information on our company policy regarding quotes.
We at Alma International Trading require a Letter of Intent (Loi) from the end purchaser before we can provide a detailed price quote.
Once we receive the Loi, our team will promptly review it and provide you with an accurate and comprehensive price quote.
We do not respond to emails and phone calls to receive information without a written request with the final buyer's details.

Important Notice Regarding False Documents

If the selling company receives any false documents from the buyer or their intermediaries, we will take swift and decisive action. It is our duty to ensure the integrity and legality of all transactions we engage in.

In the event that false documents are presented, we will not hesitate to report the matter to the local police. Furthermore, we will elevate the issue to INTERPOL and the International Chamber of Commerce. Our aim is to protect the interests of all parties involved and maintain a safe and transparent business environment.

We expect all transactions to be conducted in an honest and professional manner.

Thank you for your attention to this matter.

Best regards,

ALMA International Trading FZE LLC

Fuel Grade Petcoke Specification (Typical)
Elements, Unit Value Dry Basis
Hydrogen - 4.5
Nitrogen - <1.89
Vanadium - <500
Sodium - <100ppm
Iron (Fe), Ppm - <100
Nickel (Ni) Ppm - <200
Ash Content % - 0.6 Max
Fixed Carbon % - 86-89
Volatile Matter % - 9.0-14.0
Hard Grove Index - 60-80 Also We Can Supply With 45-65
Moisture % - 2.0 Max
Empty Volume % - 50
Sulphur % - 2.5-4.0
Gross Calorific Value Cal/kg - >8400
Net Calorific Value Cal/kg - >7500
Dimensions - 0mm to 50mm
Weight - Appx. 1000kg Jumbo Bags

International aviation turbine fuel manufactured to meet global aviation standards, ensuring safe, efficient, and high-performance aircraft operation.

Origin: Kazakhstan
MOQ: 500,000 Bbl x 12 mths
Max. Quantity: 5,000,000 Bbl x 12 mths
Delivery: CIF/FOB - Spot

Aviation Kerosene Colonial Grade 54 JET FUEL (JP54)

ORIGIN: Kazakhstan

LIFTABLE QUANTITY: 1,000,000BBLS

MONTHLY: 2,000,000BBLS

PRICE FOB: US $86 GROSS, US $84 NET PER BBL COMMISSION: US $4 � PRICE CIF: US $94 GROSS, US $92 NET PER BBL COMMISSION: US $4 SHARING: $2 ON THE SELLER SIDE AND US $2 ON THE BUYER SIDE.

DIESEL D6 VIRGIN LOW POUR FUEL Oil

Minimum Quantity: 25,000,000 Gallon
Maximum Quantity 50,000,000 Gallon FOB

FOB Price: Gros 05.4 USD Net 0.50 USD
CFI Price: Gross 0.64 USD Net 0.60 USD

Attention To Buyer & Buyer Intermediaries.

This Is To Inform The General Market Of The Availability Of The Below Products:
Aviation Kerosene Colonial Grade 54 Jet Fuel Russia Origin

Fob: Rotterdam/houston And Novorssiysk/primorsk

Transaction Procedure Fob

1. Buyer Issues Icpo Addressed To End Seller/refinery.

2. Seller Issues Commercial Invoice For The Available Quantity And Buyer Sign And Return Back Ci With Tank Storage Agreement (tsa) From A Reliable Tank Farm Company In Rotterdam Port.

3. Seller Provide Ppop Documents For The First Trail Quantity As Stated Below To Buyer Secure Email.

Statement Of Product Availability
Product Passport (test Analysis Report)
Injection Report (injection Report Of The Product In Trunks)
Notice Of Readiness (nor)
Product Injection Schedule (from A Reputable Third-party Pipeline Injection Company As A Guarantee Of Product Availability In Pipeline Trunks In Rotterdam Ready For Injection).

4. Buyer Within Maximum Of 48 Hours Upon Receiving The Above Ppop Provides Tank Storage Receipt Tsr To The Injection Company To Commence Injection From Trunks

5. Seller Provide Buyer With The Below Listed Pop Documents Within 24 Hours After Injection Is Completed Into Buyer Tanks.

EN590 10ppm Diesel is a premium ultra-low sulfur diesel fuel designed for industrial, commercial, and international transportation applications. Coordinated through refinery-linked supply channels, this fuel supports efficient engine performance, cleaner combustion, and compliance with modern international fuel standards. Mountain Top International Ltd provides reliable coordination support for logistics, shipment execution, and international transaction alignment.

Sourced and processed in Latvia, our kiln-dried birch firewood is produced through a full-cycle manufacturing process - from timber selection to finished, ready-to-burn logs - with no middlemen involved.
Key Specifications:

Species: Birch
Moisture content: <20%
Log length: 25-29 cm (custom lengths available, e.g. 24 cm or Norwegian 29 cm format)
Diameter: 5-15 cm
Packaging: Hand-stacked net bags, available in 20L, 30L, or 40L volumes
Also available: Bulk crates (1.0m³ and 2.0m³, custom sizes on request)

Our Virgin D6 Fuel Oil is a high-quality refined fuel engineered for industrial, marine, and power generation applications. Offering excellent combustion efficiency, high energy output, and reliable performance, it is an ideal solution for organisations seeking cost-effective and dependable fuel supply.

Available through established supply channels, our D6 fuel oil ensures consistent quality, competitive pricing, and reliable delivery to support uninterrupted operations.

Transactions are conducted in accordance with standard refinery procedures, with loading available at major international ports, including Houston and Rotterdam, subject to contract terms and product availability.

Qualified buyers are invited to submit their requirements for further information and transaction details.

D6 oil, also known as Residual Fuel Oil (RFO) or Bunker C Fuel Oil, is a heavy, high-viscosity fuel oil primarily used in large industrial applications and marine vessels. It is a residual product from the crude oil refining process, known for its high energy density and requiring pre-heating before use.

Key Characteristics
Viscosity: D6 oil is highly viscous (thick and slow flowing) at ambient temperatures, which means it requires pre-heating, typically to 104C to 127C (220F to 260F), to be pumped and burned efficiently.
Composition: It consists of long-chain hydrocarbons and is essentially the material left over after valuable lighter fuels like gasoline and kerosene have been removed during fractional distillation.

Purity & Pollutants: Standard D6 oil has a high sulfur content, often between 2.0% to 3.0%, making it one of the more polluting fuel types. Its use is increasingly limited in many regions due to environmental regulations, which has led to the development of lower-sulfur variants.

Primary Applications
Due to its characteristics and the need for specialized handling equipment, D6 virgin oil is best suited for large, stationary combustion systems.

Power Plants: Used in boilers and turbines to generate electricity, often as a reliable backup fuel source.
Marine Vessels: A common fuel for large ocean-going ships, tankers, and bulk carriers that have the equipment to pre-heat the fuel.

Industrial Use: Utilized in industrial boilers, furnaces, and heavy manufacturing processes that require high heat intensity.
Large Generators: Serves as a fuel source for large-scale, robust generators, such as those used in mining operations or remote locations.

Bluestone Oil And Gas Ltd provides high-performance AGO diesel designed for heavy-duty trucks, construction equipment, industrial generators, marine engines, and manufacturing operations. Our diesel offers excellent fuel efficiency, operational durability, and dependable power output for demanding industrial applications.

Kubba tactical suede desert boots
Desert boots are specifically designed for army. Full grain cow leather. Nylon fabric

Hardwood Charcoal
HS Code 4402.10.0000
PRICE = US$ 500 CIF
ORIGIN: SOUTH AFRICA
PACKAGE: 50KG
MIN ORDER: 200 TONS
Description
Hardwood Charcoal
Also known as \"lump charcoal,\" this is what you get when wood is burned down to impurity-free coal. No binders, no fillers just pure, simple, high-quality charcoal. Diehard grill masters love this stuff, both because of its simplicity and because it has a host of practical advantages.

Specification
Material 100% hardwood lump charcoal; no chemicals added
Odor Natural wood
Ash Content 7-8%
Ash Color White
Calories 7000 Kcal/kg
Fixed Carbon 80%
Moisture ± 5%
Volatile Matter 15%
Burning Time Up to 6 hours; no sparks, no smoke
Shape Hexagonal
Length 20 cm (7.9\")
Width 5 cm (2.0\")
Inner Hole Diameter 10 mm (0.4)

We offer the best hardwood charcoal
Place of Origin:South Africa
Brand Name:hardwood lump charcoal
Model Number:hardwood lump charcoal
Material:Hard Wood
Application:Barbecue (BBQ)
Shape:Lump
Type:Black Charcoal
Calory (J):7800
Ash Content (%):1.5
Fix Carbon:75%
Volatile:13.5%
hardwood lump charcoal:hardwood lump charcoal

Hide & Skin

Key attributes
Industry-specific attributes
Feature Eco-Friendly
Other attributes
Pattern Wet Salted
Use - Belt, Furniture, Handbag, Luggage, Sofa, Garment, shoes, Upholstery,
Home Textile, Dress, accessories, Bags,Purses & Totes, Coat and Jacket,
Home Decor, SKIRTS
Place of Origin Kenya
Material - COW SKIN
Type - Grain
Thickness - 1.8mm - 2.0mm
Size - 22-32 Sq Ft
Brand Name - custom
Model Number - cow skin hides
Material - COW SKIN
Minimum Price(USD): 6 USD PER PIECE
Maximum Price(USD): 10 USD PER PIECE
Price Units: USD
incoterms TT
Product origin KENYA
Harmonization System (HS) Code :410120