1.Wide operating temperature range: -20 to +105íµ
2.Dielectric strength: 1, 500v ac for one second
3.Short thermal response time in water, high stability in moisture
4.Suitable for use in low and high-temperature and moisture environments
5.High accuracy, different tolerancr available , cost-effective
6.Ul approval , rohs compliant
7.Customized specifications are welcome
8.Climatic category:iec60068-1
9.Resistance tolerance ú¦ía1%í½ía10%
10.Insulation resistance: í²100mª+
11.Dissipation constant:min. 5mw/íµú¿in airú¬
12.Thermal time constant :85seconds max ( in water )
13.Moisture resistance:(40íµ 95% rh)1000 hours
H2,3,4 humidity and temperature transmitters are designed for environment monitoring and controlling in industrial, commercial and other buildings. These transmitters can be
used for:
Humidity and temperature monitoring of supply, exhaust
and return air(H2, duct mount)
Humidity and temperature monitering in critical
environment such as outside air(H3, outside mount)
Other applications of immersion humidity and temperature
monitoring(H4, separate probe)
Features:
High performance digital sensors and circuits, ensure
accurate measurement and temperature compensation
Good long term stability and reliability
100% field changeable sensors, no re-calibration needed
Fast response
Multiple output signals selectable
Industrial design, SS probe and sintered filter
High protection rate to IP65
Temperature:
Sensor: Solid state band gap, NTC20K, PT1000/100 or Ni1000
Range: 0~50ípC/transmitter
Output: 4~20mA/0~10V/RS485, NTC20K, PT1000/100 or Ni1000
Accuracy: <í+0.5ípC@25ípC
Power: Voltage 24VAC/DCí+10% Current 24VDCí+10%
Current Output Load: 500ª+
Temperature Limit: -10~70ípC, 0~95%RH (Non condensing)
Storage Temperature: -20~80ípC
Housing: ABS Enclosure, SS probe, SS Sintered Filter
Protection: IP65
MODELS: Code Temperature Range
0 NA
1 0-50ípC
7 Other
Code Temperature Output
0 No.
1 0-10VDC
2 4-20mA
3 PT1000,í+0.2ípC@25ípC
4 PT100,í+0.2ípC@25ípC
5 NTC20K,í+0.2ípC@25ípC
6 Ni 1000,í+0.4ípC@25ípC
7 Other thermistors
8 RS485/Modbus
Code Humidity Output(0-100%RH)
1 0-10VDC
2 4-20mA
8 RS485/Modbus
Code Humidity Accuracy
2 í+2%RH
3 í+3%RH
Code Descriptions
H2 Duct mount H/T transmitter
H3 Outside Air H/T
H4 Separate Probe H/T
The MS20 is a high precision and high sensitivity of soil moisture & temperature sensors. By measuring the dielectric constant of the soil, it shows stable real moisture content directly. The MS20 can measure the volume of soil moisture. The FDR soil moisture measurement method is in line with present international standards. Apply to the soil moisture monitoring, scientific experiment, water-saving irrigation, greenhouse vegetables, flowers, grass, fast measure, plant cultivation, greenhouse control, precision agriculture and the other measurement of water, weather or particulate matter content.
Support customer soil type, the user can calibration
Contain moisture & temperature measure. High precision, quick response and good compatibility.
Seal with Fire-retardant Epoxy Resin, IP68 water proofing. Long term usage.
Special treatment of probe material can be against acid and alkali corrosion.
Widely used in many kinds of soil because of the imported advance tech which correct the effect of different salt content.
Multiple protection functions including Power supply, communication, analog output. High reliability.
2 Technical parameter
Technical parameter
Signal output typeRS485 interfaceVoltage outputVoltage output
(Low-voltage)Current output
Output rangeModbus Protocol0-2V
0-5V
0-10V
Customize0-1V
0-2V4-20mA
Customize
Input voltage4.2-30V/DC4.2-30V/DC2.7-16V12-30V/DC
Average working current
About MT-10
We designed the MT-10 to measure the water content, electrical conductivity, and temperature of soil. The MT-10 uses an oscillator running at 70 MHz to measure the dielectric permittivity of soil to determine the water content. A thermistor in thermal contact with the sensor prongs provides the soil temperature. The Polyurethane coating on the MT-10 circuit board protects the components from water damage and gives the sensor a longer life span.
2.1 Specifications
Volumetric Water Content
Range: 0 (air) to 100 (water)
Temperature
Range: -40 to 80
Resolution: 0.01
Accuracy:±0.5
General
Dimensions: 10 cm (1) x 3.2 cm (w) x 0.7 cm (d)
Prong Length: 5.2 cm
Dielectric Measurement Frequency: 70 MHz
Measurement Time: 150 ms (milliseconds)
Power requirements: 3.6 to 30 VDC, 0.3mA quiescent, 10mA during 150 ms measurement
Output: SDI-12 / RS485 MODBUS RTU
Operating Temperature: -40 to 80
Connector Types: 3.5 mm (stereo) plug or stripped & tinned lead wires (Pigtail)
Cable Length: 5 m standard; Maximum 75 m. Please contact if you need longer cable lengths.
PHYSICAL CHARACTERISTICS
SENSOR IMAGE
SENSOR NAMEMT10
DIMENSIONS10 cm X 3.2 cm
CABLE LENGTH5 meters
Description of Industrial Thermocouple RTD PT100 Temperature Sensor with 1/4" Thread
Product Name :Thermocouple
Type :PT100
Temperature Range :0�°C-150�°C
Probe Size : 0.5 x 10cm / 0.2" x 3.9" (D*L)
Thread Diameter: 8mm/ 0.31"
External Material Plastic, Metal, Rubber
Total Length 1M / 39.4"(we can customize other length)
Fork Terminal Spacing 0.5cm
Typical Applications
* Contactless measurement of surface temperatures
* Temperature measurement of moving objects
* Remote measurement due to small angle of view
* Climate control
* Medical instruments
Introduction
The Smartec infrared sensor type SMTIR9902SIL is a standard Smartec SMTIR9902 sensor equipped with a silicon lens for measuring radiation temperatures within a small angle of view (7.27'). The SMTIR9902SIL contains a NI1000 temperature sensor for measuring the temperature of the sensor itself. The temperature range of this internal sensor is -20 to 100 'C. The sensor is mounted in a modified TO-05 encapsulation.
HTG3535CH Humidity and Temperature Sensor Module with voltage output
DESCRIPTION
Based on the rugged HUMIREL humidity sensor, HTG3535CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications.
FEATURES
* Voltage Supply: 5 Vdc
* Nominal Output @55%RH: 2.401 - 2.559 V
* Humidity Average Sensitivity: +26 mV/%RH
* Current consumption: 1.2 mA dc
* Humidity Measuring Range: 0 - 100 %RH
* Humidity Operating Range: 0 - 100%RH
* Temperature Operating Range: -40 - 110'C
* Suitable for small bulk assembly
* Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS
* Full interchangeability. Better than +/-3%RH and +/-0.25'C
* Humidity calibrated within +/- 3% RH @ 55% RH
* Temperature measurement through NTC direct output
* Demonstrated reliability and long term stability
* Reliability not affected by repeated condensations
APPLICATIONS
* Automotive
* Home Appliance
* Printers
Description
TSEV01CL55 is a contact-less temperature measuring system for OEM use based on the detection of infrared radiation.
TSEV01CL55 is equipped with an infrared sensor (Thermopile) in front. The Thermopile Sensor has to be pointed at the target object of interest.
The basic working principle is:
Detection of infrared radiation with a Thermopile sensor, which turns incoming radiation to an analogue voltage
Determination of sensor temperature using a thermistor
Further analogue signal processing and conditioning
Calculation of ambient and object temperature using a processing unit
Providing the ambient and objects temperature at digital output bus (I2C)
The TSEV01CL55 is suitable for a wide range of application where non-contact
The TSEV01CL55 is equipped with a silicon lens (back focal length = 5.5mm) to narrow the field of view.
I2C pull-up resistors are provided on the sensor.
The I2C interface does not block the clock for clock-stretching.
FEATURES
* 0'C - 300'C Measurement Range
* 4V - 16V Supply Voltage Range
* Up to 1.5% Accuracy
* 2mA Current Consumption
APPLICATIONS
* Contact less Temperature Measurement
* Climate Control
* Industrial Process Control
* Household Applications
Temperature Sensor WZP2-8496
YOYIK widely adopts automation and CNC technology in production, and strict quality inspection processes ensure that each product meets the highest standards of the industry, winning wide recognition in the global market. In order to quickly respond to market demand, YOYIK has established an efficient supply chain system and a global service network, which can ensure fast and timely delivery of products both in the domestic and international markets. In addition, the company's 24-hour online technical support and all-round customer service further enhance customer satisfaction and trust.
Yoyik can offer many spare parts for power plants as below:
#DF-Temperature Sensor WZP2-8496-DF
Pressure Switch 1246214-HK2027
speed sensor CS-3-M10-L220
LVDT Sensor TD-1-30
Load Cell part CS05721OL
Tempered glass (accessories included) SFD-SW32-(ABC)
Water temperature sensor 32302002001
Camera probe assembly EIIS-2-CP
Eddy Current Sensor PR6424/119-141
Infrared array probe HSDS-30/T
Automatic leveling instrument AT-B3
RTD WZPK2-1016
use of lvdt sensor 191.36.09.03
Eddy Current Sensor PR6422/104-040
cheap electric heater RJ-14.5-140
Probe 81724-00-07-10-02
CONVERTER GD2133007
Motor management relay WDZ-5232
LVDT Sensor mounting bracket Z25.4-1
LVDT Sensor TD-1-200-15-01
best oil tank level monitor 397001-SA8SH9
Protector Gauge CWY-D0-810806-01-10-02
DEH speed sensor DF6101-005-065-01-03-00-00
Eddy Current Signal Converter CON031/916-200
eddy current probe CWY-DO-810801
pt100 rtd probe WZPK2-230
TEMPERATURE CONTROLLER BWR-04JJ(TH)
boiler heating element RJ-14.5-140
Eddy Current Sensor PR6423/000-141
Turbidity meter 1720E
Bolt electric heating rod ZJ-22-29
PRINTED CIRCUIT BOARD IO PORT PCB JD10095
Transmitters with sensors 3051TG3A2B21AB4K5M5
MAIN IGNITOR FLIXIBLE CABLE XDL-3000
Pulse Module Advantech 6 Channels ADAM 5081S-BE
Digital Position Monitor DM-5
LVDT TDZ-IE-32
Temperature Sensor WZP2-8496
temperature sensor GPEAS7FS0650
Facing the changes in the energy industry, YOYIK keeps pace with the times, not only focusing on the optimization and upgrading of traditional power generation equipment, but also deeply studying new energy technologies and developing a series of accessories suitable for new energy power generation systems, showing the company's keen insight and forward-looking layout of future energy development trends. While promoting its own development, YOYIK does not forget to fulfill its social responsibilities, is committed to environmentally friendly production, implements energy-saving and emission reduction measures, uses environmentally friendly materials, and reduces environmental pollution.
Yoyik can offer many spare parts for power plants as below:
#DF-temperature sensor GPEAS7FS0650-DF
Seismic pressure gauge HM100-25-B-G1/2-FF
LIMIT SWITCH YBLXW-5/11G2
TSI Card 3500/53
Embedded touch screen HSDS-30/C
LVDT sensor ZD-5000TD
current tranfer LJB1 2000A/10V 0.5
Digital Position Monitor DM-5
Pressure Switch 0166-40303-1-011
Eddy Current Sensor PR6424/101-030
Displacement Travel Sensor ZDET200B
Eddy Current Signal Converter CON011/914-060
sensor eddy current CWY-DO-811404
TEMPERATURE MODULE HY-6000VE/41
Eddy Current Sensor PR6422/001-101
PLC COMMUNICATION MODULE HY-6000VE/03
LVDT Sensor CZTD-3A-200
speed sensor CS-1H-D-075-02-02
speed sensor QBJ-CS-2-2S
speed meter DZA8011-B-62
Rotor Position proximity Probe ES-11-M14x15-B-00-05-10
surface thermocouple with self adhesive backing TC03A2-KY-2B/S13
Thermocouple WREKD2-04
Bolt electric heating rod ZJ-22-38
LVDT Sensor 181.36.06G03
ELECTRONIC CARD ATC 20A â??ZK
Pressure controller LTDN4GG10A7030 XBX 65/125C
TRANSMITTER H2 ANALYZER S-H2
Sensor DF310880-50-01-01
DEH speed probe ZS-04-075-3000-005
Eddy current sensor 330103-00-18-05-02-05
MODULE, AUTOMATIC VOLTAGE CONTROL ESP I/O PORT PCB DN2001
Pressure Switch 0821097
Sensor Proximity Turbin TM0180-08-00-05-10-02
Flowmeter OPTIFLUX4000F
Steam turbine bolt electric heating rod ZJ-17-3R
Relay for distribution network RMD/C-66H
temperature sensor GPEAS7FS0650
Water temperature sensor 32302002001 turbine part
The use of advanced technology, absolutely first-class service quality, is our constant faith over the years. Production is in strict accordance with national standard, line standard and technical standards. The main technical backbone are retired senior engineer and senior technicians, who has participated in the design, manufacture and installation of Gezhouba, Ertan, Three Gorges and other power plants. We have served hundreds of hydropower stations, thermal power plant overhaul, and technical transformation to provide high quality equipment, construction design, installation, spare parts, and after-sales service.
Yoyik can offer many spare parts for power plants as below:
#DF-Water temperature sensor 32302002001 turbine part-DF
Travel switch L*19-001
Turbidimeter LPV417.99.00002
LVDT transmitter XCBSQ-04/300-01-11
Gauge transmitter 3051TG1A2B21AB4M5
RTD WZPM2-08-120-M18-S
Eddy Current Sensor PR6423/004-000
power card 24VDC HZD-8500B-TX
pendant 12 botton COBP-66BHS
Sensor DF312580-90-01-00
Bolt electric heating rod ZJ-20-56
Annunciator CJX-9
non contact linear sensor LVDT TDZ-1-H 0-200
Bending spring type heating rod ZJ-15.5
LVDT transmitter XCBSQ-04/300-02-00
make turbine thermal expansion DF9032
SENSOR, VIBRATION VELOCITY SDJ-SG-2H
LVDT transmitter XCBSQ-04/200-01-12
Intermediate relay UEG/A-4DPDT/110VDC
Wind speed sensor YF6-4
linear displacement transducer sensor A156.33.01.28
CIO Input/Output Card PC D235
Differential expansion probe WT0110-A01-B00-C05-D10
Sensor DF312580-90-11-00
Sensor DF312580-90-02-02
FOXBORO Card FBM233
Infrared sensor HSDS-40/T
Rotor Position proximity Sensor Extension Cable ESY-80
M8410 Input Source Board ME8.530.031
SERVO VALVE CONTROLLER XSV-813-01
Temperature element W2PM2-001
LVDT 186.33.01.06G01
LVDT Sensor TH-3GN-100-15-01
Temperature probe WZPM2-003, L=10 M
Sensor speed turbine ZS-01 L=80
type j thermocouple metals WREK2-191
Thyristors KP500 -16
Water temperature sensor 32302002001 turbine part
Engine coolant temperature sensor elongated head contact with the cooling liquid, the temperature of the coolant is detected by the change of the resistance value, and this signal is sent to the ecu, used to detect the engine coolant temperature.The ecu corrects the fuel injection time and the ignition time after receiving the temperature signal.
The normal use of the coolant temperature sensor is -30 â° c to 120 â° c, the corresponding output voltage is 0.3v ~ 4.7v.When the ecu detects an output voltage signal beyond this range, you can determine the sensor circuit failure.
Weichai water temperature sensor 612600090673/612600090673
Dongfeng tianlong, day kam water temperature sensor water temperature plug / 0281002209 / d5010412450
Weichai europe three cooling water temperature sensor 612600090919/612600090919
Nanchong natural gas engine 36.2d-02012 water temperature sensor assembly (ecu) / 36.2d-02012
Faw xichai engine 6110 accessories water temperature alarm sensor / 3818010-001-0010
Dongfeng warrior accessories eq2050 - water temperature is too low / too high sensor / 3839c21-010
Cummins water temperature sensor diesel generator set temperature alarm switch / 3408627
Natural gas engine water temperature sensor 3602160-55d
Heavy duty hau wo lng natural gas engine cooling water temperature sensor / r61540090004
Weichai wp10 water temperature sensor 612600090358
Nanchong natural gas engine water temperature sensor 36.2d-02012 / 36.2d-02012
Weichai engine country 3 efi cooling water temperature sensor 612630060035
Chongqing cummins engine m11 water temperature sensor 4921477 shiyan auto parts city / 4921477
â? Car intake air temperature sensor (IATS)
â? Automotive coolant temperature sensor (CTS)
â? automobile exhaust gas temperature sensor (Ex-haust Air Temperature Sensor, EATS)
â? car was NTC thermistor / temperature sensor
Car temperature sensor,Respectively, water temperature sensor,Exhaust | intake air temperature sensor,These types of sensors are thermistors with the same characteristics,The temperature coefficient is negative temperature coefficient.The water temperature sensor is mounted on the engine cooling water passage,Its role is to detect the engine cooling water temperature,The water temperature sensor housing is fully enclosed,Use the change of resistance value to detect water temperature.The signal temperature value generated by the water temperature sensor is input to the ECU,ECU according to the cooling water temperature ignition control,Correction fuel injection amount to real-time control of the engine,To ensure the normal operation of the engine under different conditions.
Intake | outlet temperature sensors are installed,Within the housing of the air cleaner box or regulator,The air flow meter or an intake manifold,Used to detect the temperature of the engine inhaled air.As the intake air temperature changes will affect the air density,The hotline, hot film cooling strength and the degree of atomization of the mixture have an impact,Intake air temperature sensor,Provide a signal to correct this effect.
The coolant temperature sensor consists of a negative temperature coefficient thermistor that is very sensitive to temperature changes.When the engine coolant temperature gradually increased,Thermistor resistance will gradually decline,On the contrary increases,When the engine coolant temperature changes,The output voltage of the sensor also changes accordingly.
Engine coolant temperature sensor elongated head contact with the cooling liquid,The temperature of the coolant is detected by the change of the resistance value,And this signal is sent to the ECU,Used to detect the engine coolant temperature.The ECU corrects the fuel injection time and the ignition time after receiving the temperature signal.
The normal use of the coolant temperature sensor is -30 , C to 120 , C,The corresponding output voltage is 0.3V ~ 4.7V.When the ECU detects an output voltage signal beyond this range,You can determine the sensor circuit failure.
Weichai water temperature sensor 612600090673/612600090673
Dongfeng Tianlong, day Kam water temperature sensor water temperature plug / 0281002209 / D5010412450
Weichai Europe three cooling water temperature sensor 612600090919/612600090919
Nanchong natural gas engine 36.2D-02012 water temperature sensor assembly (ECU) / 36.2D-02012
FAW Xichai engine 6110 accessories water temperature alarm sensor / 3818010-001-0010
Dongfeng warrior accessories EQ2050 - water temperature is too low / too high sensor / 3839C21-010
Cummins water temperature sensor diesel generator set temperature alarm switch / 3408627
Natural gas engine water temperature sensor 3602160-55D
Heavy Duty Hau Wo LNG Natural Gas Engine Cooling Water Temperature Sensor / R61540090004
Weichai WP10 water temperature sensor 612600090358
Nanchong natural gas engine water temperature sensor 36.2D-02012 / 36.2D-02012
Weichai engine country 3 EFI cooling water temperature sensor 612630060035
Chongqing Cummins engine M11 water temperature sensor 4921477 Shiyan Auto Parts City / 4921477
Application:Application ? air conditioners, refrigerators, freezers, water heaters, water dispensers, heaters, dishwashers, disinfection cabinet, washing machines, dryers and other appliances on. ? car air conditioners, water temperature sensor, intake air temperature sensor, engine ? Switching power supply, UPS uninterruptible power supply, inverter, electric boilers, etc. ? smart toilet, electric blankets, etc.
The Product Sells Point:
Key Specifications/Special Features:
A: Size chart
MF52 NTC with epoxy to lead
Note: The size and wire color according to customer requirements!
II: Product Features:
1: MF52 series of products for the lead with an epoxy coating type
2: Wide range of resistance: 0.1KO ~ 500KO
3: Resistance and B value of high accuracy
4: moisture proof, good insulation, high reliability, small time constant
5: small, reflecting the speed
6: is stable for a long time, consistency
7: Operating temperature range: -40 ~ 125 ?
3: Product Applications:
Air-conditioning equipment, heating equipment, medical equipment, temperature control instrumentation, electronic gifts, electronic hygrometer, car thermometer, electronic calendar, rechargeable battery pack and charger, laptop batteries.
Four: Model Description
MF 52 103 F 3950
? ? ? ? ?
?MF ¬-- negative temperature coefficient (NTC) thermistor Code.
?52-- epoxy encapsulated NTC thermistor temperature sensor.
?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O).
Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5%
?3950-- thermal resistance index (material factor) B is: 395 × 10 (K)
Five: MF52 Series Model Specification
Note: according to customer requirements, provide different resistance, B value precision, customization.
NTC thermistor measurements must note the following:
• can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation.
• After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement.
• Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC.
• High temperature measurement, required temperature bath thermometer correction, check
The sensor temperature measuring of the steel equipment or axle bearing is designed to measure the temperature of axle boxes with the transferring data to wagon controller. The temperature sensor is attached directly to the axle box cover with a bolted connection. The power element of the temperature measuring sensor is a built -in battery.
Fastening type bolted joint;
Range of working temperatures 40 + 85 C
Range of measured temperatures 40 + 125
Accuracy of temperature measurement 0.5
Frequency plan EU433 ;
The period of communication is adjusted;
Type of antenna built-in ;
Sensitivity -114 dBm ;
Radio communication range in the tunnel up to 100 m ;
Transmitter output power up to 20 mW ;
Built-in battery capacity 2700 mAh ;
Continuous battery life p to 2 years ;
Dimensions, mm not more than 119 x 32 x 32 ;
Weight, g, not more than 300 ;
Total service life, years, not less than 10 ;
The operating mode is long ;
Dust and water protection rating IP65.
G7-H2 Wireless Temperature Sensor System
With G7 temperature wireless sensor and Base Station, you can start monitoring your premises environmental condition online.
Wireless sensor G7 transmits measurement to Base Station via wireless signal. Base Station collects all the wireless sensors readings and uploads to central server in interval via Modbus TCP protocol.
G7-Centre App receives data from Base Station over Internet or LAN.
G7 Client App for Windows10, iOS, Android displays and stores all the incoming data in computer/tablet/smartphone for data analysis. By monitoring and understanding how environmental changes, you can adjust your air conditioner or heater to save energy and money.
Applications
water pipes network real time monitoring - water in and out temperature
oil/gas pipes network, pump stations
underground water level real time monitoring
environmental monitoring system - wind/temperature//CO2/pressure
remote Industrial equipment monitoring
rural equipment monitoring e.g. power plant, antenna tower
measuring equipment data capture and report via Wi-Fi
food chain, storage, transport industry, building management
agricultural, farming, laboratory, medical industry
Take temperature readings from a distance, or underwater, using this Waterproof DS18B20 Digital Temperature Sensor. It's got a 90cm (0.9m) cable with a stainless steel, PVC coated probe at the end. You'll be able to use it with any 3V-5V system, and take temperature readings with an accuracy of 9-12 Bits (configurable in code). The best part is that it's digital, meaning you won't suffer any signal degradation over the longer distance.
Waterproof - Take the temperatures of liquids/moist environments with the stainless steel probe. It's shrouded in PVC plastic too, meaning it will hold it's own in temperatures up to 100 degrees Celsius.
Temperature - Usable from -55 degrees Celsius to 125 degrees Celsius. Accuracy of 0.5 degrees.
Digital - The digital interface used to relay the readings guarantees minimal signal degradation over the longer distances (90cm for this standard cable)
1-wire interface - You can have multiple DS18B20s connected to the same central micro-controller pin as each device has a unique identifier hard-coded in.
Long range - 1.5 meters of cable by default, but you can make it longer if needed
Maker friendly - The DS18B20 chip is able to be powered with 3v - 5.5v which is perfect for maker platforms .
HOOK-UP GUIDE
This sensor is simple, you've got 3 wires (Power, Ground and Data). You simply need to connect the data pin to an input pin on your micro-controller and the power and ground to power and ground
You'll also need to connect a resistor between power and signal wires, as shown in the circuit diagram on the Sensor's wiki page.
Specifications
TECHNICAL SPECIFICATIONS
Compatible with 3.0V to 5.5V systems (development board etc)
Within 0.5 degrees Celsius accuracy
Recommended usable temperature range: -55 to 125 degrees Celsius
Select-able 9-12 bit resolution (Factory Default at 12-bit)
1 Wire Interface
Unique 64 bit ID for each sensor
Query time is less than 750ms
Stainless steel tube 6mm diameter by 35mm long
Cable diameter: 4mm
Cable Length: 90cm 100cm 200cm or Customized
Technology character
58361 Temperature Sensors Suppliers
Short on time? Let Temperature Sensors sellers contact you.
