HYDRAULIC SHEARING MACHINE
We Are Occupied In Manufacturing Superior Quality Of Hydraulic Shearing Machine In Various Shapes & Sizes. Hydraulic Sheet Metal Shearing Machine Is Made-Up From High-Grade Components That Assure High Strength And Toughness To The Structure. Moreover, We Provide Hydraulic Shearing Machine At The Most Reasonable Price In The Industry.
FEATURES :
Mono Block Welded Steel
Easy to use and convenient to operate
Electronically adjustable rake angles
Rapid cutting facility
Adjustable cutting clamp
Activation from console and movable foot cut switch
Sheet clamped hydraulically before cut starts
Stroke length â?? position can be set for short jobs
Beam returns on releasing foot switch for smaller cuts
DESIGN FEATURES :
Mono Block Welded Steel rigid to deflection tensile movement of high tensile.
Ease of accurate gap adjustment of blades for bur-free cuts.
Polymide surfaced Hydraulic Hold down cylinders to prevent sliding of the plates during cutting operation.
Motorized back gauge with electronic digital readout.
Electronically adjustment RAKE ANGLE as per material of thickness for twist free cuts.
Synchronized Beam guided system for constant gap between blades.
Extra capacity to cut Hard-thicker plate than nominal capacity.
Blades produced from High Alloying Steel with functional four sides.
Adjustable Cutting & Clamping force for quality cutting & power saving.
Rapid cutting of short pieces by electrical stroke adjustment system.
STANDARD FEATURES & ACCESSORIES
Moving beam Synchronized by differential cylinders.
Hardened rollers guide beam for constant blade gap.
Blade gap easily adjustable by calibrated levers.
Rake angle adjustable to suit thickness and material.
Activation from consol and movable foot switch.
Sheet clamped Hydraulically before cut starts.
Stroke length - position can be set for short jobs.
Beam returns on releasing foot switch for smaller cuts.
Cutting area illuminated for clear view of ends.
First two hold downs spaced closer at both ends.
Squaring arm 1000mm at left with hardened liners.
Squaring arm 600mm at right helps distribute wear.
Front gauging by stopper-scale on squaring arm.
Hardened rods on table for safe easier feeding.
Two front supports for supporting longer plates.
Front operated motorized back gauge with NC type DRO 1000 mm
Compact, Low maintenance of silent Hydraulic system.
Digital stroke - counter.
Operation Mechanism
The control mechanism can make the machine fix rhinestones on the material by using Power Transducer, Ultrasonic generator and Vacuum generator. Positioning the red/ infrared light spot on the right point manually, ultrasonic will come out automatically and produces a high frequency vibration over the rhinestones and then is transformed to the heat energy instantly. Therefore the rhinestone is fixed on the material surface permanently.
Stone diameter available: Size 6#-30# (diameter 2mm-6mm)Glass Octagon Stone, Aluminum Octagon Stone, Round Aluminum Stone & Plastic Piece with Adhesive.
Main Features:
l Humanized large screen Chinese/English display
l Safe operation, no damaging to the material
l SANWO cylinder made in Korea
l ARK Two-position Three-way Solenoid valves made in Korea
l CKD Direct Solenoid made in Japan
l Accurate infrared positioning
l Heating system: Ultrasonic without press again
l Environment protection and noiseless; Low power consumption, smaller size
l High efficient production with 24 hours operation
l Suitable for both thin & thick fabrics.
l Instruction book: Chinese, English, Arabic.
Technical Data:
l Max Speed: 130-150 pcs/min (more than 5 workers with manual way)
l Power Supply : 220V / 50HZ, 110V/60HZ
l Gas power: 0.3-0.5MPA
l Air Pressure : 5-6kg/cm
l Ultrasonic Power: 200W
l Ultrasonic Frequency : 28KHz
l Static Capacitance: 2300-2700PF
l Five size air nozzle for various size rhinestones:
6#(¦µ1mm),10#(¦µ1.5mm),16#(¦µ2mm),20#(¦µ2.5mm),30#(¦µ3.5mm)
l Double head working table size: 1100*800mm, single head:400*350mm
l Color available: blue & green & white available
l Double head :Gross/Net Weight : 85KG /65K
l Single head: Gross/Net Weight:66KG/56KG
l Wooden package size:Double head: 0.81*0.655*1.13m, 0.6CBM; single head: 0.67*0.67*1.13m,0.51CBM
l Warranty: electricity system parts for 1 year ,air system half year
l
Packing:Carton / wooden packing with desiccant material. Wooden case is under Fumigation, ventilation treatment available.
Description of multi spindle engraving machine
engraving machine(four heads)
1.multi-spindle can be processed at the same time and also be used solely .the machine with multi spindle raises the multiple efficiencies compared to the machine with one spindle .and it is economical and practical .
2.it may use one spindle to process the large-scale work piece solely instead of other spindles.
3..adopts the imported ball screw rod with high precision ,it may play down the clearance to the smallest which is produced in the course of movement and make the precision and orentation more accurate.
4.imported line guide rail makes all sides of machine bear equally, which guarantees the precision and intensity of machine.
4.adopts the way of memory on break of point ,which guarantees continuous processing in the condition of suddenness, such as break cutter, and interval of days.
5.the machine is moving just like a gantry ,the lathe is cast wholly, ,it is firm and durable ,the machine will not deform after long playing use.
6.it may customize multi spindle according to the requirements of clients, the table of the machine can be customized.
The products have been widely used in advertisement gifts ,crafts industry, model processing industry, architecture, seal, woodcutting, stonework , decoration, and habiliment machining, and otherwise
CHARACTER:
The lathe bed is cast iron wholly. high-rigidity firmness, without deformation
Three axis adopt the imported ball screw rod with high precision and linear guide rail which ensures the precision of machine
High subdivision step motor with high speed, low noise , running firmly, and powerful torque cutting
Adopts brushless water cooled spindle with frequency conversion. With low noise, the service life is long ,and rotated steadily.
High-power, deeply incise. It can incise 30mm thickness acryl once.
The software of the machine can be upgraded so as to ensure the machine improved constantly.
Opening software interface can connect all kinds of 3D engraving software, compatible with high precision software
(SERVO MOTOR DRIVER,VACCUM TABLE, DUST ABSORBING SYSTEM ,DSP CONTROLING SYSTEM HANDLE BOARD, ATC ARE ALSO AVAILABLE)
Specification:
Model DL-1212 DL-1215B DL-1218 DL-1325
Motion positioning accuracy of XYZ 0.02/300mm 0.02/300mm 0.02/300mm 0.02/300mm
Repeat positioning accuracy of XYZ 0.01mm 0.01mm 0.01mm 0.01mm
Resolution <0.003mm <0.003mm <0.003mm <0.003mm
Max.working area 1200*1180*110mm 1200*1480*100mm 1200*1780*110mm 1200*2400*110mm
Flatbed size 1420mm*1500mm 1420mm*1650mm 1420mm*2120mm 1550mm*1650mm
Spindle motor power 1500w brushless water cooled spindle with frequency conversion
Max. speed 10m/min 10m/min 10m/min 10m/min
Power supply AC220V/AC110V
AC220V/AC110V AC220V/AC110V AC220V/AC110V
Cutter diameter 3.175mm 4mm 6mm 3.175mm 4mm 6mm 3.175mm 4mm 6mm 3.175mm 4mm 6mm
Command language G*.u00*.mmg*nc. G*.u00*.mmg*nc. G*.u00*.mmg*nc. G*.u00*.mmg*nc.
Max. power consumption 2.3KW 2.3KW 2.3KW 3.2KW
Manner of receiving data PCI PCI PCI PCI
Weight 450kg 480kg 510kg 680kg
Features
Rugged construction providing shock, dust and moisture resistance
Dual monitor position with automatic image orientation
Automatic arc calibration and iber identiication
User-selectable iber clamping method sheath clamp or fiber holders
Auto-start tube heater feature
Color LCD display with anti-relective coating for excellent visibility in bright sunlight
Simultaneous battery charge and splicer operation
Long life battery (up to 160 splice/heat cycles per charge)
Detachable work table incorporated into the transit case
Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
Green friendly RoHS & WEEE compliant
Specifications
Model FSM-60S
Applicable Fibers SM(G.652),MM(G.651), DS(G.653),NZ-DS(G.655)
Cladding Diameter 80 um to150 um
Coating Diameter 100 um to 1000 um
Fiber Cleave Length 8 to 16mm with 250um coating diameter, 16mm with 900um coating diameter
Typical Average Splice Loss 0.02dB with Sm, 0.01dB with mm, 0.04dB with DS, 0.04dB with NZDS
Splicing Time Typical 9 seconds with standard single-mode fiber
Arc Calibration method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core alignment data
Storage of Splice Result Last 2000 results to be stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification 300X for single X or Y view, or 187X for X and Y view
Viewing method Dual cameras with 4.1 inch TFT color LCD monitor
Operating Condition 0 to 5,000 m above sea level, 0 to 95 % RH and -10 to 50°C respectively
mechanical Proof Test 1.96 to 2.25N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3(40), 35-55 seconds with Fujikura micro sleeves
Protection Sleeve Length 60mm, 40mm, micro
Splice Cycles with Battery Typical 160 cycles with power save functions activated
Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery
Terminals USB 1.1 (USB-B type) for PC communication.
Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection Max. wind velocity of 15m/s. (34 mph)
Dimensions (W × D × H ) 136 × 161 × 143 mm; 5.3 × 6.3 × 5.6 inches
Weight 2.3 kg (5.1 lbs) with AC adapter; 2.7 kg (5.9 lbs) with BTR-08 battery.
Main parameters of Fedar Printer 6198
Printhead: 8*EPS3200 ( 8 Epson 4720 )
Printhead Resolution: 3200DPI
Printing Speed: 260sqm/h
Print Width:1900mm
Ink: Dye Sublimation Ink,Pigment Ink
Media:Transfer Paper ,Poster Paper
RIP Software: Maintop, Photoprint,Neostampa,Onyx,etc.
Main features of Fedar Printer 6198:
â??High Resolution Printhead
8 Epson3200 printhead,2 pass speed can reach up to 260ã?¡/h
â??Two-level Ink Supply System
Adopt two-level ink supply system to ensure continuous printing for a long time.
â??Intelligent Ink Starving Alarm
Reduces the tediousness of frequently checking the remaining amount of ink, and at the same time reminds to add ink in time.
â??Stable Media Feeding and Take-up System
Convenient and fast, the printing media is quickly stored, equipped with automatic paper measurement and anti-rubbing function.
â??Advanced Capping Station
Equipped with advanced intelligent auto printhead cleaning and moisturizing device,which can pump ink well and keep the ink flow fluently.
â??Foggy & VSDT Printing
Unique two-dimension intelligent foggy and wave-foggy function, and VSDT variable droplet technology, improve printing quality obviously.
Main details of this printer:
1.Specially Designed Car
The position of the print head can be adjusted according to different printing medias, and anti-collision devices at both ends.
2.Intelligent Air-heat Dryer
The intelligent drying system is synchronized with printing.The temperature can be adjusted in real time during the printing process.
3. Fluororubber Pressure Roller
US fluororubber pressure roller prevents static electricity.The unique lifting device can respond to the phenomenon of partial paper bulging during the printing process.
4. High Precision Platform
The printing platform is controlled within �±7.5 wires and the surface hard oxidation treatment, no deformation for a long time.
5. THK Mute Guide Rail
Using Japanese THK mute linear guide rail, the movement is more stable and the life is longer.
6. Chinese Leadshine Motor
The two-way Leadshine brushless motor has higher accuracy, smaller length error and more stable performance.
7. Large Capacity Ink Reservoirs
Four units of 3L super large capacity ink reservoirs provide ink independently and continuously.
184 Pnc (Znc+Table Movement Auto Positioning) Edm Se Suppliers
Short on time? Let Pnc (Znc+Table Movement Auto Positioning) Edm Se sellers contact you.
Sell POE Industrial Switch 1 SPF + 6 RJ45 Port
Description:
It provides a stable and reliable Ethernet transmission offered by Opticombine, with high-quality design and reliability. It is positioning in the broadband network intervention market, to offer and realize Ethernet data exchange, convergence, and long-distance optical transmission with efficient bandwidth and reliable fiber optic network solutions for users.
The Industrial Media Converter complies with various characteristics such as mini size, no fan, low power consumption, high reliability and stability, and easy maintenance. It offers redundant mechanisms for critical applications that need always-on connections.
Features:
1. Support Auto-MDIX, and full/half-duplex self-negotiation mode
2. Provide SC/LC/FC/ST interface fiber port & support single/dual fiber transmission
3. Support 10K Bytes giant frame, compatible with various extension protocol
4. Support IEEE802.3az energy-efficient Ethernet technology
5. 4K MAC address table
Opticombine was founded in 2011, owned by SI CHUAN GUANGFA TECHNOLOGY CO., LTD. Opticombine is a manufacturer and full-line distributor of communication fiber opticï¼?connectors, fiber optic consumable products, active & passive network equipment, and components.
It serves customers from all segments of the fiber optics industry including telecommunications, contractors, resellers/distributors, researchers, government, education, cable TV operations, and telephone R&D facilities.
We're committed to delivering an exceptional customer experience by consistently applying the principles of trust, partnership, expertise, and a proven reputation â?? knowing that our employees are the key to our success.CC:
CC:
Sell POE Industrial Switch 1X10/100 Base + 1 RJ45 Port
Description:
It provides a stable and reliable Ethernet transmission offered by Opticombine, with high-quality design and reliability. It is positioning in the broadband network intervention market, to offer and realize Ethernet data exchange, convergence, and long-distance optical transmission with efficient bandwidth and reliable fiber optic network solutions for users.
Features:
1. Support Auto-MDIX, and full/half-duplex self-negotiation mode
2. Provide SC/LC/FC/ST interface fiber port & support single/dual fiber transmission
3. Support 10K Bytes giant frame, compatible with various extension protocol
4. Support IEEE802.3az energy-efficient Ethernet technology
5. 4K MAC address table
6. Support IPv6 Protocol
7. Electric 8KV surge protection, easy to use in an outdoor environment
8. Complete status indicator, working state at a glance
9. Power input polarity protection design, no worry about the wrong operation
Opticombine was founded in 2011, owned by SI CHUAN GUANGFA TECHNOLOGY CO., LTD. Opticombine is a manufacturer and full-line distributor of communication fiber opticconnectors, fiber optic consumable products, active & passive network equipment and components.
It serves customers from all segments of the fiber optics industry including telecommunications, contractors, resellers/distributors, researchers, government, education, cable TV operations, and telephone R&D facilities.
We're committed to delivering an exceptional customer experience by consistently applying the principles of trust, partnership, expertise, and a proven reputation â?? knowing that our employees are the key to our success.
CC:
Main features:
1) DSP offline control system.
2) Front & Rear entry for super-long plate to pass through.
3) Safety Magnetic switch to make sure safety during work.
4) Imported Linear rail guide with high durability, stability, precision.
5) Waste collect device, easy to pick up samples and save raw materials.
6) Most advanced Dual limit switch protection on XYZ axis, preventing the bump of laser head.
7) Dual red light pointer makes laser focus much easy, accurate and more personalized, no need any focusing tools.
8) Laser Machine software: 1) Lasercut5.3 with dongle and LCD Key Board ( Leetro Card) 2) Laser work software without dongle and LCD Key Board (RD CAM)
9) Separate control system box, separate laser power box, separate control panel, External spares plug and socket much safe for machine.
10) Optional Parts: Motorized up and down table, Auto focus, Rotary clamp, water chiller, etc.
Applications:
Application Materials:
Acrylic, wood, bamboo, cloth, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass and other nonmetal materials.
Application Industry:
advertisement, arts and crafts, leather, toys, garments, model, building upholstery, computerized embroidery and clipping, packaging and paper industry.
Technical Parameter:
ModelCS1290CS1390CS1490CS1690
Working area(mm)1200 x 9001300X9001400X9001600X900
Standard Laser power:80w
Optional Laser power:100W/120W/150W
Gross power1600w
Laser type:CO2 Laser tube
Cutting depth:Acrylic 0-40mm, others material(varied according to the nature)
Engraving speed :0-1000mm/s
Cutting speed:0-600mm/s
Resetting positioning accuracy:
Demo condition fujikura arc fusion splicer with fluke fiber inspector mini- minimal use
Fsm-60s splicer with ct-30 cleaver fluke ft500 tester
Features:
Rugged construction providing shock, dust and moisture resistance
Dual monitor position with automatic image orientation
Automatic arc calibration and fiber identification
User-selectable fiber clamping method – sheath clamp or fiber holders
Auto-start tube heater feature
Color lcd display with anti-reflective coating for excellent visibility in bright sunlight
Simultaneous battery charge and splicer operation
Long life battery (up to 160 splice/heat cycles per charge)
Detachable work table incorporated into the transit case
Fsm-60s fusion splicer kit includes (with cleaver):
Ct30a cleaver
Adc-13 ac adapter
Acc-14 ac cord
Spare electrodes (pair)
Sheath clamp
Usb cable
Splicer carrying strap
Quick reference guide
Video instruction manual
Jp-05 splice sleeve cooling tray
Transit case with carrying strap
Ft500 fluke networks fiberinspector mini - information
The ft500 fluke networks fiberinspector mini video microscope puts the solution to contaminated end-faces in the palm of your hand. This portable video microscope works ten times faster than traditional scopes. Simply insert the probe and inspect installed fiber connectors through the bulkhead adapters without accessing the backside of the patch panels.
Ft500 includes:
Fiberinspector mini video microscope includes fiber probe and display, ac adapter/battery charger, probe adapter tips (st, sc and universal 2.5mm patch cord tip) and soft carrying case).
* we are selling this as a complete kit and will not separate.
Excellent Fiber Laser Metal Cutting Machine MTF3015 Fiber Laser Metal Cutting Machine China
Stability and reliability� of light path system and control system.
Raycus fiber lasers,high and stable function,lifespan is� over 100000 hours.
professional laser cutting machine Features
Stability and reliability� of light path system and control system.
Raycus fiber lasers,high and stable function,lifespan is� over 100000 hours.
Energy efficiency: greatly reduced power consumption.
Excellent cutting quality for fine thickness and medium thickness sheet metals.
Power output from 500W� to 25000W
Automatic mechanized Nesting power output control function (edges, start-ups).
Smoke extraction (included in series models).
Dual proportional valve control system for different gas pressures and special system for high pressure cutting.
Higher cutting quality and efficiency ,cutting speed is up to 60m/min� with appearance and beautiful cutting edge.
We have tube welded table for economical solution, and plate welded table for heavy-duty applications.
Single table, double auto feeding table, with or without protective cover, both available.
We have professional fiber laser cutting machine designer, laser machine designer to meet all your customized request, offer professional and fast service
Maximum simultaneous positioning speed: 160m/min� with appearance and beautiful cutting edge.
Sheet Metal Fiber Laser Cutting Machine After-sale Service:Ã?Â
36� months guarantee of the whole machine, we will provide replacement or repair service when you need it.
Software is on update for free whole life.
English manual and CD video for machine using and maintaining will send to you with the machine.
Our engineer can offer technical support in� your country if necessary,or get train in our factory for free.
7*24h online technical support via Skype,Email,WhatsApp,Phone,Team Viewer, even on weekend even on vacation.
FAQ
Q1:What is the effective cutting size of this machine?
A:1500*3000mm,it also can be customized as needed.
Q2:How long is your delivery time?
A:� � Generally it is a week days if the goods are in stock. or it is 15 working days if the goods are not in stock, it is according to quantity.
Q3:What is your after-sale service?
A:� Complete machine operation instruction manuals and videos,providing� on-site training services.
7*24h, 30 technicians online technical support.
3-year warranty, parts can be replaced or repaired.
MYST supply laser cutting machine, which include sheet & tube laser cutting machine and sheet metal fiber laser cutting machine. If your job is complicated, you can contact us and we will provide you with the best solution!
For more information on small laser cutter, please click here to browse our
Optic Fiber Media Converter 10/100BaseT/TX to 100BaseFX external power supply
Features
Supports auto MDI/MDIX crossover
1K MAC address can be storage, and automatic updated
Supports 10/100M, full/half duplex auto- negotiation
Comply with IEEE 802.1Q VLAN TAG, Spanning Tree standard
More than 50,000 hours MTBF
Supports over-sized packets up to 1600Bytes
Full duplex-flow control, Half duplex-back pressure
Link fault pass through function
Full-positioned LEDs to indicate power and network status
Same card on rack mounted and desktop
FCC part 15 Class A, CISPR Class A, VCCI Class A, CE Mark
Throughput @ 100Base: 148,800 pps (64-byte packets)
Multimode or Singlemode; single fiber or dual fiber optional
Transmission distance is from 2KM up to 120KM
Network broadcast storm protection function
High quality optical modules and chips with working stability
Specification
Standard
IEEE802.3 (10BASE-T)
IEEE802.3u 100BASE-TX/FX (Fast-Ethernet)
IEEE802.3x (Flow Control)
IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree
Fiber Connector
SC standard, ST/FC/LCoptional
10/100BASE-T
STP or UTP Category 5/5e/6 cable (Max. 100m)
100BASE-FX
50/125um, 62.5/125um multimode fiber cable (2Km)
9/125um singlemode fiber cable (20/40/60/80/100/120Km)
Conversion Mode / Delay Time
Store-and-Forward < 10us, straight-through<0.9us
Flow control
Full duplex-flow control, Half duplex-back pressure
MTBF
50,000 hours
RJ-45 Port
Auto-MDI/MDIX
The company automotive fuel storage box manufacturer DuoYuan assets of 200 million yuan, the staff 365 people, professional and technical personnel of which 53 people. The company covers an area of 104000 square meters and a building area of 45000 square meters.
Products are divided into car fuel and its accessories, auto sheet metal stamping products, automobile door and automobile electronic four categories. Production structure is divided into metal plate of kaiping workshop, fuel workshop, sheet metal workshop, car oil sensor production workshop, fuel production workshop, mold cover lock processing workshops, paint shop, electroplating workshop etc.
The factory has 1030 tons of double acting hydraulic press 1, 800 tons of double acting hydraulic press a, 650 tons of double acting hydraulic press 3 sets, and 630 tons of single movement hydraulic press machines, two 315 tons of wide mesa 2 sets, 400 tons of hydraulic press, a 250-ton press machines, two 5-100 tons of punch dozens of Taiwan, car special profile rolling mill machines, two 100 KW high frequency contact welding machine, 1 75 KW-150 KW welding machine more than 10 table, aluminum alloy stainless steel fuel welding machine 5, the metal plate with a line of kaiping open CNC plasma cutting machine, laser cutting machine, CNC 1 1, processing center, 3 sets three coordinates measuring instrument
1. The products of the company are five series 130 DuoZhong products. Fuel products are divided into deep deep drawing type, square model, circular; According to the classification of the material can be divided into lengzha steel, galvanized steel of classes, aluminum alloy, stainless steel, such as class According to use can be divided into fuel and hydraulic pressure tank.
From 80 up to 700 volume rises, length from 300 to 2200. Large stamping tensile products: steyr extended cab the cover board (2100 x 1664), steyr heightening cabin skins above (1421 x 2087), steyr engine cover, steyr wang engine cover, Mercedes QianWei grid board (400 x 200), military bumper, etc. One fuel tank cover lock, steyr engine cover 12 kinds of national patent products, DuoZhong product substitution import.
So far, the company fuel storage box products has entered into the Beijing, tianjin, chongqing, shandong, shanxi, shanxi, anhui, Inner Mongolia, guangxi, Shanghai and the northeast three provinces, 10 DuoGe province, city, and manufacturers for sinotruk, xian, north shanxi steam rush heavy card, sichuan steam hongyan, Shanghai huizhong, dandong yellow, anhui echoo, guilin daewoo, zhengzhou YuTong, domestic manufacturers. The international market has to enter Japan, Europe and America market.
Detailed Product Description of Crack and opinion CNC router for woodworking(DL-1325)
Specification:
Repeating positioning accuracy of X,Y,Z: 0.01mm
Resolution: <0.003mm
Max working area of X,Y,Z: 1200*2400*200mm
Flatbed size:1500*2950mm
Spindle motor power: 2200w
Max speed: 0- 30m/min
Power supply: AC220V/AC110V
Cutter diameter: 3.175 4 6 8 12.7mm
Max power consumption: 3.2kw
Manner of receiving data: PCI
Weight: 680kg
Detailed Product Description
1.high speed machining ,the carve and straight speed is the same ,without loading the running speed can reach 30m/minute ,high speed incising speed can reach 10m/minute.
2.the weight loading redundancy is high ,life-span is long: he holistic machine three axis adopt the imported high precision square line guiding orbit ,and three axis is rack running (without belt connection).Y axis adopt the imported the double engine driving ,machine with high rigidity ,big power ,running firmly, this can ensure the machine without deformation after along time high speed running ,without dithering .adopt eccentricity axis design ,the clearance is adjustable . decelerated by gearwheel occluding pinion, ensure the machine running in high speed and high precision ,the particular flange sliding block make the holistic machine more firmly and more durable
3. containing software :Exact JD Paint /type3/Artcam /CASTMATE and so on ,such CAD/CAM design software.
4.cotrol conveniently :can choose the advanced USB connection DSP control system ,completely offline working ,don't occupy any computer resources ,and it can achieve the DSP on -off automatism ,achieve high speed machining ,carve and straight line at the same step, he carve are more perfect.
5. Automatic Reamer Position applications: auto-feeding blade is convenient for changing cutter when machine is carving, restore from the power off, continuation on break point, the machine hour can be forecast.
The construction is building block type which may be disassembled and assembled easily ,it is not restrict by the install place.
6. The machine is used for solid wave board machining, wood door, aluminum door, wood window ,wave board, compound board etc. furniture ,also for wood product caving ,incising, enchase, stiletto etc. assistant machining ,it can also be used for metal working and stone working too.
7.we also can equip the USB control handle board concentrate all the shortcut function of the control system of engraving machine , vacuum absorbing table ,hop-pocket dust collector and so on. .
8.we also can produce the machines according to your requirements.
Detailed Product Description of Crack and opinion CNC router for woodworking(DL-1325)
Specification:
Repeating positioning accuracy of X,Y,Z: 0.01mm
Resolution: <0.003mm
Max working area of X,Y,Z: 1200*2400*200mm
Flatbed size:1500*2950mm
Spindle motor power: 2200w
Max speed: 0- 30m/min
Power supply: AC220V/AC110V
Cutter diameter: 3.175 4 6 8 12.7mm
Max power consumption: 3.2kw
Manner of receiving data: PCI
Weight: 680kg
Detailed Product Description
1.high speed machining ,the carve and straight speed is the same ,without loading the running speed can reach 30m/minute ,high speed incising speed can reach 10m/minute.
2.the weight loading redundancy is high ,life-span is long: he holistic machine three axis adopt the imported high precision square line guiding orbit ,and three axis is rack running (without belt connection).Y axis adopt the imported the double engine driving ,machine with high rigidity ,big power ,running firmly, this can ensure the machine without deformation after along time high speed running ,without dithering .adopt eccentricity axis design ,the clearance is adjustable . decelerated by gearwheel occluding pinion, ensure the machine running in high speed and high precision ,the particular flange sliding block make the holistic machine more firmly and more durable
3. containing software :Exact JD Paint /type3/Artcam /CASTMATE and so on ,such CAD/CAM design software.
4.cotrol conveniently :can choose the advanced USB connection DSP control system ,completely offline working ,don't occupy any computer resources ,and it can achieve the DSP on -off automatism ,achieve high speed machining ,carve and straight line at the same step, he carve are more perfect.
5. Automatic Reamer Position applications: auto-feeding blade is convenient for changing cutter when machine is carving, restore from the power off, continuation on break point, the machine hour can be forecast.
The construction is building block type which may be disassembled and assembled easily ,it is not restrict by the install place.
6. The machine is used for solid wave board machining, wood door, aluminum door, wood window ,wave board, compound board etc. furniture ,also for wood product caving ,incising, enchase, stiletto etc. assistant machining ,it can also be used for metal working and stone working too.
7.we also can equip the USB control handle board concentrate all the shortcut function of the control system of engraving machine , vacuum absorbing table ,hop-pocket dust collector and so on. .
8.we also can produce the machines according to your requirements.
1.AC110V/220V/240V
2.Power: 180W
3.Size:1600*800*1190mm
4.Program: Auto /Manual
5. SL-type super-long rail technology massage distance is 130cm
6.2D movement: 4 massage balls, body position detection
7.One button design, slip against the wall & zero gravity
8.Auto-adjustment of leg degree
9.Auto-telescopic footrest, auto-sensing plantar position
10.Three rows of rolling massage on the sole of the foot
11.Shoulder, hip, leg, hand, whole body air pressure massage
12.Bluetooth Music
13.Hot compress function of leg and waist
High spindle rotation. Cut two 45° (one 45°at left and right respectively) simultaneously with one movement. Accurate cutting angle. Smooth cutting section and burr-free. No need for secondary processing. High efficiency: 3 times of productivity of common single-head machine. Be suitable for 45°saw cutting (sliding door and window frame, photo frame, picture frame, display case, air outlet, light boxes, screens, strips, aluminum binding, extruded aluminum â?¦â?¦ ).
1. Double-pole synchronous saw cutting: cut two 45° (one 45°at left and right respectively) simultaneously with one movement and save 2/3 of time compared to general cutting.
2. Stamp foot switch to auto press and saw materials, which is safe and easy.
3. Air-pushed hydraulic saw feeding and steady cutting speed. Auto-spray atomized cutting oil during cutting to cool and lubricate saw blade to keep it clean and sharp.
4. Clamp with cylinders at top and bottom, front and back, steady materials, never deform, accurate cutting angle and pressing pressure adjustment available to prevent hollow material from deforming.
5 . 2.5*2.5m feeding and discharging rack are specially installed on right and left of the machine. Set positioning plate on discharging rack for convenience of determining cutting dimensions (transfer table is steel platform).
Model ZG-350SA2
Sawing angle 45Ã?2
Max. sawing width 90mm
Max. sawing height 140mm
Spindle speed 3300R.P.M
Saw blade tungsten steel head; alloy saw blade
Dimension of work surface 870Ã?190Ã?800mm
Machine motor 2HPÃ?2
Air pressure 6kg/cm2
Machine dimension 1410Ã?900Ã?1300
Packing dimension 1500Ã?980Ã?1420mm,2500*150*100
NW/GW 390/460kg
High spindle rotation. Cut two 45° (one 45°at left and right respectively) simultaneously with one movement. Accurate cutting angle. Smooth cutting section and burr-free. No need for secondary processing. High efficiency: 3 times of productivity of common single-head machine. Be suitable for 45°saw cutting (sliding door and window frame, photo frame, picture frame, display case, air outlet, light boxes, screens, strips, aluminum binding, extruded aluminum â?¦â?¦ ).
1. Double-pole synchronous saw cutting: cut two 45° (one 45°at left and right respectively) simultaneously with one movement and save 2/3 of time compared to general cutting.
2. Stamp foot switch to auto press and saw materials, which is safe and easy.
3. Air-pushed hydraulic saw feeding and steady cutting speed. Auto-spray atomized cutting oil during cutting to cool and lubricate saw blade to keep it clean and sharp.
4. Clamp with cylinders at top and bottom, front and back, steady materials, never deform, accurate cutting angle and pressing pressure adjustment available to prevent hollow material from deforming.
5 . 2.5*2.5m feeding and discharging rack are specially installed on right and left of the machine. Set positioning plate on discharging rack for convenience of determining cutting dimensions (transfer table is steel platform).
Model ZG-350SA2
Sawing angle 45Ã?2
Max. sawing width 90mm
Max. sawing height 140mm
Spindle speed 3300R.P.M
Saw blade tungsten steel head; alloy saw blade
Dimension of work surface 870Ã?190Ã?800mm
Machine motor 2HPÃ?2
Air pressure 6kg/cm2
Machine dimension 1410Ã?900Ã?1300
Packing dimension 1500Ã?980Ã?1420mm,2500*150*100
NW/GW 390/460kg
High spindle rotation. Cut two 45° (one 45°at left and right respectively) simultaneously with one movement. Accurate cutting angle. Smooth cutting section and burr-free. No need for secondary processing. High efficiency: 3 times of productivity of common single-head machine. Be suitable for 45°saw cutting (sliding door and window frame, photo frame, picture frame, display case, air outlet, light boxes, screens, strips, aluminum binding, extruded aluminum â?¦â?¦ ).
1. Double-pole synchronous saw cutting: cut two 45° (one 45°at left and right respectively) simultaneously with one movement and save 2/3 of time compared to general cutting.
2. Stamp foot switch to auto press and saw materials, which is safe and easy.
3. Air-pushed hydraulic saw feeding and steady cutting speed. Auto-spray atomized cutting oil during cutting to cool and lubricate saw blade to keep it clean and sharp.
4. Clamp with cylinders at top and bottom, front and back, steady materials, never deform, accurate cutting angle and pressing pressure adjustment available to prevent hollow material from deforming.
5 . 2.5*2.5m feeding and discharging rack are specially installed on right and left of the machine. Set positioning plate on discharging rack for convenience of determining cutting dimensions (transfer table is steel platform).
Model ZG-350SA2
Sawing angle 45Ã?2
Max. sawing width 90mm
Max. sawing height 140mm
Spindle speed 3300R.P.M
Saw blade tungsten steel head; alloy saw blade
Dimension of work surface 870Ã?190Ã?800mm
Machine motor 2HPÃ?2
Air pressure 6kg/cm2
Machine dimension 1410Ã?900Ã?1300
Packing dimension 1500Ã?980Ã?1420mm,2500*150*100
NW/GW 390/460kg
High spindle rotation. Cut two 45° (one 45°at left and right respectively) simultaneously with one movement. Accurate cutting angle. Smooth cutting section and burr-free. No need for secondary processing. High efficiency: 3 times of productivity of common single-head machine. Be suitable for 45°saw cutting (sliding door and window frame, photo frame, picture frame, display case, air outlet, light boxes, screens, strips, aluminum binding, extruded aluminum â?¦â?¦ ).
1. Double-pole synchronous saw cutting: cut two 45° (one 45°at left and right respectively) simultaneously with one movement and save 2/3 of time compared to general cutting.
2. Stamp foot switch to auto press and saw materials, which is safe and easy.
3. Air-pushed hydraulic saw feeding and steady cutting speed. Auto-spray atomized cutting oil during cutting to cool and lubricate saw blade to keep it clean and sharp.
4. Clamp with cylinders at top and bottom, front and back, steady materials, never deform, accurate cutting angle and pressing pressure adjustment available to prevent hollow material from deforming.
5 . 2.5*2.5m feeding and discharging rack are specially installed on right and left of the machine. Set positioning plate on discharging rack for convenience of determining cutting dimensions (transfer table is steel platform).
Model ZG-350SA2
Sawing angle 45Ã?2
Max. sawing width 90mm
Max. sawing height 140mm
Spindle speed 3300R.P.M
Saw blade tungsten steel head; alloy saw blade
Dimension of work surface 870Ã?190Ã?800mm
Machine motor 2HPÃ?2
Air pressure 6kg/cm2
Machine dimension 1410Ã?900Ã?1300
Packing dimension 1500Ã?980Ã?1420mm,2500*150*100
NW/GW 390/460kg
The Positive Type of Gravity Separator is a new gravity machine of positive pressure independently developed by our company. The structure of the equipment is optimized and the capacity have greatly improved basis on previous machine. Blowing gravity table produce specific gravity segregation phenomenon according to air movement and vibration, through adjusting wind pressure, amplitude and other technical parameters, larger proportion materials sink down and smaller proportion drift upward, then different proportion finished products discharge from corresponding outlets. gravity separator can effectively remove mildew grain, Shrivelled seeds, empty seed, moth eaten grain, immature grain and other impurities, widely used in wheat, corn, watermelon seed, sunflower seed, pumpkin seed, all kinds of beans and various oil crops selection processing.
184 Pnc (Znc+Table Movement Auto Positioning) Edm Se Suppliers
Short on time? Let Pnc (Znc+Table Movement Auto Positioning) Edm Se sellers contact you.
