This "Solar Sensor Wall Light" has an intelligent energy saving mode which charges the solar light under both strong sunlight and dim sunlight. This is best suited for lighting up dark or sensitive areas around the house. This solar light is made of high-quality PVC plastic which makes it durable against sunshine, rain, snow, ice, and wind. This solar light is waterproof and heatproof. These solar light can be placed in your garden, yard, aisle or driveway. This lantern emits a white bright light. It's lightweight and portability makes it perfect for your camping and trekking. The built-in solar panel charges the battery to provide 8-10 hours of light. The solar panel needs only 6-8 hours of charging for a full charge.
The installation of this solar light is easy and requires no extra equipment. You just need to screw it to hold it against any surface or wall.
This "Solar Sensor Wall Light" is equipped with Day/Light sensor, When there is Sunlight available the solar light will charge itself and when it becomes dark, the solar light turns itself On and provide a bright white light of 20 LED lights.
Besides the solar sensor, this solar light has motion sensor inside it which runs on infrared. When you move away from the solar light it will automatically shut down and when you go near to the solar light, it will automatically turn on.
SKU YN2092
Weight 150 Grams
Height 12 cm
Width 5 cm
Length 9 cm
Watt 5 Watts
Material Plastic
In Pack 1 Solar Sensor Wall Light
6W super wide input range regulated signgle output DC/DC converters
TP06DE series is 6W, 8:1 wide input range efficiency up to 87%, 1500VDC isolated voltage , at operating temperature -40 to+85 With input undervoltage protection, output overcurrent, short circuit protection, widely used in communications, medical, industrial control, power, instrumentation,etc.
FEATURES
Super wide input range ï¼?8:1ï¼?
Low Ripple &Noise 1500VDC isolated voltage
High efficiency, high power density Output over-load,short circuit protection Operating temperature -40â?? to+85â??
Regulated parts RoHS compliant /
SELECTION GUIDE
Part Number Input Voltage (VDC) Output Efficiency (Typ. )
% Ripple &Noise
MV
Rated Range values Voltage VDC) Current
TP06DE48S03W 48 9-75 3.3 1.8 78 50
TP06DE48S05W 48 9-75 5 1.2 81 50
TP06DE48S12W 48 9-75 12 0.5 85 50
TP06DE48S15W 48 9-75 15 0.4 86 50
TP06DE48S24W 48 9-75 24 0.25 87 50
Notes 1. Do not meet the conditions for full load start when input @9-10VDC only Can start at full load when voltage above 11V.
2. When the working temperature 30 , the maximum output power can be 10W for a long time.
3.It is necessary to add A voltage-stabilizing diode 5.1V / 0.5W between â??Vin pin and CTR pin,See the application circuit for details.
3w isolated wide input single and dual output dc/dc converters
Tp2l series are a range of isolated 3 watt converters in a sip package, 2:1 wide input range and tightly regulated output voltage qualifies these converters for many cost critical applications in industrial and consumer electronics. Operating temperature range from -40to 85.The internal smd construction makes it possible to offer a product with high performance at low cost.
Part numberInputOutput Efficiency (typ.)
Voltage(vdc)Voltage
(vdc)Current(ma)
AC Input Microwave Motion Sensor - Highbay Version
AC Input Microwave Motion Sensors
Microwave Motion Sensors AC Input
HNS203HB
5.8GHz C-band microwave motion sensor, tri-level dimming control.
Operating voltage: 120~277V AC, 50/60Hz.
Rated load: 400W @ 120VAC, (capacitive)
Features
5.8GHz C-band microwave motion sensor, tri-level dimming control.
Operating voltage: 120~277V AC, 50/60Hz.
Rated load: 400W @ 120VAC, (capacitive)
800W @ 200~277VAC, (capacitive)
Stand-by power: 1w.
Dual-PD technology, real Daylight monitoring function for built-in application.
Zero-cross point operation, protect the sensor relay against the in-rush current, secure the max. load and life time of the relay .
Detection range up to 18m in diameter.
Mounting height: 10~12m.
Operation temperature:-20??+70??
RoHS compliant.
IP rating: IP20.
Setting
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range.
In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor function.
"Disable": The sensor works always, even during daylight.
"50lux": The sensor works only in twilight.
"10lux, 2lux": The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.
"+" : means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in the absence of people.
*0% means on/off control.
10%--Vdim=1.5Vdc 30%--Vdim=3.0Vdc50%--Vdim=5.0Vdc
-
8516 Dc Input Motion Sensor Module Suppliers
Short on time? Let Dc Input Motion Sensor Module sellers contact you.
Quick Sense Wardrobe Cabinet Hinge LED Motion Sensor Night Light System (White, 0.25 W) - Set of 10 Pack Smart Sensor Light
Specifications:
Material: ABS; Color: Grey
Lighting Color: Warm white/Cool white (Optional)
Battery: 12V 23A(Not Included)
Type: Smart Sensor; Bead Quantity of Each Light: 3pcs
How to Installation:
Step1: First open the hinge screws on the backsheet
Step2: Put the back sheet screws and hinges screwed together
Step3: Put the battery into the LED hinge light
Step4: Make LED lighting into the card pre-installed on a good film
Step5: Put the thickest chucking and complete
Can be used in your home cabinet, closet, cupboard, or wardrobe with a hinge. Note: suitable for hinges like the picture, the screw in the hinge must be screwed off, the led light base need to be mounted in there
HM612 is a newest smart digital motion detector. This Smart digital detector offers a complete motion detector solution, with all electronic circuitry built into the detector housing. Only a power supply and power-switching components need to be added to make the entire motion switch, a timer is included. The series has versions which can include ambient light level and sensitivity adjustments.
Senba Pyroelectric Infrared Sensors with high sensitivity, low noise and reliable performance. We have our own research and development department, with international technology and Hybrid IC technique expertise developed more than 15 years. The goods come standard with enhanced immunity to RFI (Radio Frequency Interference) and 2.4G high frequency interference. Senba PIR sensor suppport delay time, sensitivity adjustable, lighting adjustable.
Senba Pyroelectric Infrared Sensors with high sensitivity, low noise and reliable performance. We have our own research and development department, with international technology and Hybrid IC technique expertise developed more than 15 years. The goods come standard with enhanced immunity to RFI (Radio Frequency Interference) and 2.4G high frequency interference. Senba PIR sensor suppport delay time, sensitivity adjustable, lighting adjustable.
5.8GHz C-band microwave.
Input voltage: 12 - 24V DC .
Input current: 30mA.
*0~10V / PWM output signal.
Super compact size(o50 only), easy and small enough to be used built-in.
Specially designed for UFO highbay fixtures, shoeboxes, wallpacks, simple plug and play.
If the lighting fixture manufacturers / contactors do not want the sensor function, they just need to easily remove the sensor head and put the cover cap on, the fixture becomes standard non-sensor control fixture.
Intelligent photocell to measure and differentiate natural light from LED light even when used built-in.
Memory function with one button commissioning, easy operation and user friendly.
IR remote commissioning, easy setting and user friendly.
Detection range up to max. 16~18m in diameter.
Mounting height: max.12m.
Operation temperature: -20 c ~ + 70 c.
RoHS compliant.
IP rating: IP65.
1. Push button as trigger function, single, double,triple-click to advertise ble packet
2. Mutil frequency LF FRID(125KHz), HF(13.56MHz), UHF(868~915MHz) RFID
3.Mutil protocol: Ibeacon, eddystone, accelerometer sensor
4.Waterproof IP65 housing with key-chain hole
5.Sweet programmable button design, the wearable can not swich off the beacon via button.
6.Customize logo via laser printing
Body / Housing: DKP Sheet Metal Body Sensor Type : Motion Light Source : SMD LED Color Temperature : 3000 K / 4000 K / 6500 K CRI >80 IP Value : IP 20 Installation: Surface Mounted POWER: 18W LUMINOUS FLUX(lm) : 2.000 DIMENSIONS : 290*290*50,5 mm BEAM ANGLE : 360° DETECTION RANGE : 9 m INSTALL HEIGHT : 2.8 m SENSOR ON/OFF TIME OPTIONS: 5 Sec- 5 Min .Emergency Light Time : 3 Hours
Body / Housing: DKP Sheet Metal Body . Optic: Glass / Polycarbonate /Opal Diffuser . Sensor Type : Motion. Light Source : E27 .IP Value : IP 20. Installation: Surface Mounted DIMENSIONS : 290*290*90,8 mm .BEAM ANGLE : 360° .DETECTION RANGE : 9 m. INSTALL HEIGHT : 2.8 m. SENSOR ON/OFF TIME OPTIONS: 5 Sec- 5 Min. Emergency Time : 3 Hours
Body / Housing: DKP Sheet Metal Body .Sensor Type : Motion Light Source : E27 (25W*2 Max.) IP Value : IP 20 Installation: Surface Mounted DIMENSIONS : 290*290*90,8 mm BEAM ANGLE : 360° DETECTION RANGE : 9 m INSTALL HEIGHT : 2.8 m SENSOR ON/OFF TIME OPTIONS: 5 Sec- 5 Min
Item NO. ZLU05035
PackingEach in a single blister card. Normal inner box and master carton.
Product Name Motion sensor night light
Certificate UL/CUL Material ABS flame retardant & PC, PS.
Light Source With 2pcs white LED Size 58*45*105mm
LED Power 0.6W Logo OEM Plug US/EU
MOQ 5000pcs Vlotage 230V
