Find Verified Closed Loop Stepper Motor Servo Driver Suppliers, Manufacturers and Wholesalers

Vid23 is a precise stepping motor of patent design. It is specially designed with transparent pointer shaft, pointer lumination intensity is superior to tranditional way. It also bring cost reduction in saving number of leds.
Vid23 with a gear reduction ratio of 1/180. Its mainly used in dashboard instrumentation or other digital indicator equipments, to transfer digital signals directly and accurately to analog display output.
Vid23 is driven by 2 sequent logic pulse signals. It can be driven in 5v ~ 10v providing shaft stepping angle resolution 1/12. The pointer can move with a speed more than 400hz.


1000pcs/ctn, gross weight 10.5kg,
430*314*478mm

Hybrid Stepping Motor(110BYGH)
Features:
Model: 110BYGH99-001; 110BYGH150-001; 110BYGH202-001
Step angel ( íp) : 1.8
Motor Length L(mm): 99/150/201
Rate Voltage (V): 4.95~5.44
Rate Current (A): 5.5~8
Phase Resistance ( ª+ ): 0.67~0.9
Phase Inductance (mH): 12~15
Holding Torque (N.m): 11.2~28
Lead Wire (NO.): 4
Rotor Inertia (g. c¬O): 5.5~16.2
Detent Torque (kg.cm) 5~11.7
Motor Weight (kg): 5~11.7.


110mm,5-11.7kg,28n-m.

Modelú¦85BYGH450A-001ú+85BYGH450A-002 ú+85BYGH450B-002ú+85BYGH450B-004ú+85BYGH450B-00885BYGH450C-001ú+85BYGH450C-012ú+85BYGH450D-002ú+85BYGH450D-007
Step angel ( íp ): 1.8
Motor Length L(mm): 75~151
Rate Voltage(V): 1.9~7.8
Rate Current (A): 2~6
Phase Resistance ( ª+ ): 0.43~3.9
Phase Inductance (mH): 2.5~22
Holding Torque (N.m): 2.1~9.3
Lead Wire (NO.): 4/8
Rotor Inertia (kg. c¬O): 1.4~3.6
Motor Weight (kg): 2.3~5.


85mm,9.3n-m.

Stepper motor drive
-Bipolar Motor Drive
-Microprocessor based Design
-Operating Voltage up to 80V DC
-Programmable Motor current up to 8A
-Up to 64 Microsteps - Selectable through DIP Switch
-Microstepping for Smooth Operation



Carton Box

Byj series stepper motor
Model 35BYJ46
Rated voltage 12VDC
Number of Pole 4
Speed Variation Ratio 1/85.25
Stride Angle 7.5fp /85.25
DC resistance 130ohmf+7%(25k)
Idle In-traction Frequency >500Hz
Idle Out-traction Frequency >800Hz
In-traction Torque >78.4mN.m(120Hz)
Self-positioning Tor >39.2mN.m
insulated resistance >10ohm(500V)
insulated electricity power 600VAC/1mA/1s
Insulation grade A
Rise in Temperature <40K(120Hz)
Noise <40dB(A)
Weight about 60g
BYJ stepping motor mainly used in wind guiding board of fission air conditioner in house,wind heat fire placesing board etc.,
Note:
1,Colour&length of conducting ire can be made according to the requirement of users.
2,The output shaft can be made according to the consumers need.
3,Working voltages and frequencies can be made as per users' requirements.
4,Installation dimension can be made according to user's requirements

This range of Soap Cutting Machineries can be availed in single/double/three table based design choice and mechanical/manual controlling mode based specifications. These equipment comprise of standard components like PLC controller, servo drive, servo motor, electrical parts and angle encoder. All the contact accessories of these Soap Cutting Machineries are made of 304 grade stainless steel to maintain required hygiene. Belt conveyor type motor of these equipment requires 0.55 kW power to function. Offered in three phase design, these systems have long working life. Standard of these equipment has been verified on the basis of their service life, production method and user friendliness.

Raw Material Used: Cast Iron, Mild Steel & Stainless Steel

Hand operated

Cuts soap slabs into bars and cakes

Gives fine accurate cuts

Simple in operation and use

Easy to maintain

Cutting operation performed by wire

Bearing & Double Gearing System for hassle free feeding the soap toward the wire cutting frames

The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion

The cut is clean and sharp

For smooth operation the gear arrangement is provided

Stainless Steel 304 Contact Parts & Mild Steel

Belt Driven

3 hp 3 ph motor

It is used for Screening of after mixed detergent powder and which is used to pulverize material like detergent powder, dyes, paint, bulk drugs and inorganic chemicals among others

These machines are used to break lumps of solid and make it a fine and free flowing powder

It is a closed unit and hence no loss of material

The beaters are so designed that, the material does not get hot during screening/pulverising, hence no change in the characteristics of product at the final stage detergent powder machine detergent powder mixer machine

Coconut Peeling Machine (No. B-10 & B-11)

Peeling Machine quick controlled peeler (Removal) with minimal yield loss of coconut and other products.
To peel outer (skin) layer of Fruits & Vegetables and other products.
Highly recommended to peel brown outer (skin) layer coconut fruit (after deshelling outer shell) and other Fruit & Vegetable.
Removes layer faster.
Loading and unloading manually.
Peeling off (Process/Operation) can be watched through the window provided on LID which can be opened or closed easily.
Easy cleaning.
Contact parts are either S.S. or aluminum. Working parts are safe guarded.
A wave shaped S.S. disc mobilizes the product to expose maximum surface to the S.S. barrel wall for uniform peeling.
Capacity 25 to 35 Coconut Pieces/Batch in 2 to 4 min Approx. (600 Pieces/60 min Approx.)
Machine can be run on domestic power supply.
Electric motor: 1 H.P.
Variable speed control.
Digital display of RPM on panel.
Less floor space required approx. size: L 100 cms x B 78 cms x H 96 cms
Can peel other PEEL ABLE Fruits & Vegetables too on trialing.

Leading Rapeseed Meal Manufacturers, Suppliers & Exporters From India
Rapeseed meal is the byproduct from the production of crude rapeseed oil, obtained by the subsequent extraction of rape seeds after the pressing process. it is used as a feed ingredient for the preparation of feed mixtures for all farm animals. it supports the digestion process and contains a balanced proportion of nutrients. the product has a typical brown color and a natural, typical aroma without any extraneous odours. rapeseed meal is wide usage in the cattle feed industry. it is second most widely traded protein ingredients after soybean meal in world market. rapeseed meal is produced by crushing fine quality rapeseed having correct moisture and oil content. these seeds are crushed in newly designed expellers under a close watch of highly experienced staff team. indian rapeseed meal is a coarse powder material, produced from rapeseed cake after series of preparatory physical processes followed by multistage extraction of oil under hygienically controlled conditions. rapeseed meal is having a extremely good amino acid composition, often compared to the milk protein, contributes to it is high nutritive value. the amino acid profile showing adequate lysine and methionine is very much favorable to the non-recruitment poultry feed. rapeseed meal is being used in india as an ingredient for cattle and poultry feed. it is also exported to various far east and mediterranean countries and is well accepted by millers. our rapeseed lecithin is used as a release agent for plastic, a dispersing agent in paints and inks, anti-sludge additive in motor lubricants, an anti-gumming agent in gasoline, an emulsifier, a spreading agent, and an antioxidant in the textile and rubber industries.

Rapeseed Meal Specifications:
PROPERTIES VALUES & LIMITS
Product Type: Rapeseed Meal
Moisture: 12% Max
Oil & Albuminoids: 36% Min
Place of Origin: India
Sand Silica: 2.50% Max
Fiber: 12% Max
Ash: 8% Max
Packaging Details:
TYPES OF BAGS QUANTITY
PP Bag 25 & 50 KG in New PP Bag
As Per Customer Requirement
Container Capacity:
TYPE OF CONTAINER QUANTITY
20 FT Container 21-22 Metric Tons
40 FT Container 27 Metric Tons

Product model: 17HS3401S-PGXXX
Stepper motor length: 34 mm
Shaft size: "D" shaft 16x8mm
Motor lead: plug
Including connection: 1M double dot line
Gear reducer ratio
Gearbox model: 3.71-1 5.18-1 14-1 19-1 27-1 51-1
Decrease: 3.71 5.18 14 19 27 51
Transmission length: 29 29 37 37 37 45

- High Torque Density - High torque to inertia for quicker start and atops. - Ruged design and long life bearing. - Holding torque up to 300 kg-cm. - Smallest frame size. Applications Printing Machines Coding, Marking Machines Packaging Machines CNC Machines Labelling Machines Diamond Machines SPM also.

As per motors specification sheet.

Burner Servo Motor from Tepskart, Nirmal Energy Limited, Ahmedabad, India.

Panasonic minas servo motors are amongst the highest performance motors in the world. The product line-up offers a motor suitable for most high performance applications.


Package wight:6.5kg (13.228lb.)
Package size:
35cm x 30cm x 25cm (13.78in x 11.81in x 9.84in)

Mechanical dimension & rated power:
Frames Size Rated Power
60cm X 60cm 200-600 W
80cm X 80cm 400-1,000 W
90cm X 90cm 750-1,000 W
110cm X 110cm 600-1,800 W
130cm X 130cm 1,000-3,800 W
180cm X 180cm 2,700-4,500 W
For more information, please be free to contact us for detailed PDF datasheets.

Standard package.

250w, 550w, 750w
160-250v available
200-5500rpm adjustable
Auto neddle stop, auto needle positioning, auto trimming, auto backtacking

2kg

Rated torque : 0.1nm-100nm
Rated speed : 2000rpm, 3000rpm

Carton

S series 2-quadrant bldc speed driver


¡ôspecification:
S series is simple compact speed driver with fixed parameters and pi
Close-loop. The reference can be 0-5v analog voltage or 0~100%pwm.
Also it can be 0~3khz frequency by adding a f-v unit on pcb. Motor's
r and easy use.
control functions of f/r enable, brake, speed reference and output functions of speed pulse (pg), alarm
three kinds of reference inputs:analog voltage, pwm, frequency
suitable for 3-phase bldc motors with hall sensors
use of industrial grade chips

Stepping motor driver cw250

Technical data:
1. Input voltage: 20 ½ 40vac or 24~60vdc
2. Phase current: adjustable from 1.5a to 5a
3. Running mode: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 steps
1/5, 1/10, 1/25, 1/40, 1/50, 1/100, 1/200 steps
4. Protection mode: overheat, overpressure and overcurrent protection
5. Overall dimension: 150mmß98mmß45mm
6.Weight: <600g
7. Ambient: temperature: -15 ½ 40, humidity<90%
8. Input method: one/twin impulses input compatible



It's different according every model

Part No. 20BYGH408Single Shaft
Frame Size:  NEMA8
Step Angle:  1.8 degree
Voltage:  4.32VDC
Current: 0.8A/phase
Resistance: 5.4Ohm/phase
Inductance:  1.5mH/phase
Holding torque:  30Kg-cm
Rotor inertia: 3.6  g-cm2
Detent torque: 5� kg-cm
Number of wire leads:   4
Weight:  0.2KG
Length:40mm
Front  shaft diameter: 4mm
Front shaft length: 20mm round shaft
This model is for Single shaft, with 4mm motor shaft, 20mm front shaft length, round shaft!

More Order Quantites, more  discount!

Part No.:  20BYGH206  Single Shaft
Frame Size: NEMA8
Step Angle:  1.8 degree
Voltage:  1.92VDC
Current:   0.6A/phase
Resistance:   3.2 Ohm/phase
Inductance:  0.9  mH/phase
Holding torque 14Kg-cm
Rotor inertia  9  g-cm2
Detent torque: 2 kg-cm
Number of wire leads   4
Weight:  0.05KG
Length:28mm
Front  shaft  diameter: 4mm (1/4'')
Front shaft length:  20mm round shaft
This model is for Single shaft, with 4mm motor shaft, 20mm front shaft length, round shaft!