oxygen pressure range 2 mbar - 3bar
zirconium dioxide (zro2 ) sensing elements
non-consumption technology
integral heating element
no need for temperature stabilisation
no reference gas required
high accuracy
linear output signal
operates with external interface boards
Specifications
Heater supply*
Full porous cap 4.35v dc +/- 0.1v dc (1.85a)
Stand by 2 v dc (0.85a)
Food meat smoker oven machine cooking ,drying ,baking ,fumigation ,exhaust,cleaning and other functions.
The fast and slow cycle procedure can be selected according to the process requirements to achieve the best cycle and smoke effect .2.can monitor the smoke temperature,prevent the temperature is too high ,safe and sanitary .3.various types of temperature sensors are available for users to choose. 4.add water circulation cleaning device .
capacity 50-1000kg
Taste - Neutral
Impurities - Negative
Free Fatty Acid ( % ) - max 0,10
Moisture ( % ) max - 0,05
Peroxide Value ( meq O2/ kg - max 5
Specific gravity at 20 degr C - 0,91 - 0,93
Iodine value ( g / 100 g ) 110 - 126
Colour Lovibond 5 1/4 " Red - max 1,5
Colour Lovibond 5 1/4 " Yellow - max 20
Taste - Neutral
Impurities - Negative
Free Fatty Acid ( % ) - max 0,10
Moisture ( % ) - max 0,05
Peroxide Value ( meq O2/ kg ) - max 5
Specific gravity at 20 degr C - 0,91 - 0,93
Iodine value ( g / 100 g ) 110 - 126
Colour Lovibond 5 1/4 " Red max 1,5
Colour Lovibond 5 1/4 " Yellow max 20
Do sensor dissolved oxygen sensor water quality control sensor kds-25b
Model number: kds-25b
Description
The gs yuasa dissolved oxygen sensor kds-25b is a unique
Galvanic cell type sensor which was developed for water quality
Control. Its most notable features are long life expectancy and it
Is not influenced by co2.
Features:
* long life
* virtually no influence from co2
* no external power supply required for sensor
Operation
* no warmup time is required
Applications:
* water quality control
14643 O2 A3 Oxygen Sensor (O2 Sensor) Suppliers
Short on time? Let O2 A3 Oxygen Sensor (O2 Sensor) sellers contact you.
Sensors have an internal thermistor fully sealed for temperature monitoring. Sensors are housed in a polypropylene body for long-term use underground. Two head options include a diffusion head for field use and a flow-through head for laboratory use.
2-head packaging machine (also can 4-18head according different capacity choice)
Packaging speed 15bags/min
Bag length 90-320mm
Bag width 80-210mm
Overall weight 400kg
Power 1.8kw/220v
Packaging capacity 20-1000ml
Outer packaging size 820 x1220 x 2500mm
Packaging form Back sealing
This machine is an intelligent weighing automatic quantitative packaging machine with four scales and microcomputer control. Suitable for quantitative packaging of granular materials such as miscellaneous grains, nuts ,pesticides, fertilizers, veterinary drugs, premixes, additives, laundry detergent, salt, monosodium glutamate, white sugar, seeds, rice, snacks, hardware, etc.
Performance characteristics:
1. High precision digital sensors enable precise measurement to be achieved instantly.
2. The microcomputer control system is technologically advanced, easy to operate, and more reliable to use.
3. Fast and slow vibration feeding, automatic correction of errors, achieving high-precision packaging.
4. Four scales work alternately, with fast packaging speed.
5. High quality stainless steel is used for the material contact part, which is anti-corrosion, dust-proof, and easy to clean.
Host configuration:
This machine is equipped with a dual CPU microcomputer control system, a 5-inch LCD display in Chinese or English, a user-friendly operation interface, automatic cursor detection and tracking, and simpler operation. Equipped with high-precision stepper motors to ensure the accuracy of the cutting position of each packaging bag.
Blood glucose testing strip designed to eliminate the risk of a false reading by checking each sample twice.
one Touch Ultra 100 Test Strips is a brilliant diabetic care product for diabetic patient to examine the blood sugar level on a regular basis and keep a check on it. The pack consists of 50 blood glucose monitoring strips. The Onetouch Ultra 2 is one of the best in class glucometers which makes self-monitoring of blood glucose very easy.
OEM Meter Diabetes Sensor Blood Glucose Test Strips
Packing:24Sets / CTN
CTN Dimension:37X32.5X20.5CM
G.W:4.7 KGs N.W:4.2 KGs
Reliable galvanic sensing technology
Compact 12mm design
For portable, laboratory or on-line use
Optional integral atc element
Easy to use pre-membraned replacement caps
The do1200 and do1200tc feature dependable galvanic technology. No warm up period is required. Sensors are supplied with fast responding hdpe membrane caps for portable or lab use. Optional ptfe membrane caps are available for on-line or heavy uv exposure applications. Fill solution is replaceable when required.
The do1200 is supplied without internal temperature compensation. The do1200tc can be supplied with a variety of user defined atc elements. Standard cable length is 2.5 feet with a tinned lead termination. Longer cable lengths and connectors are available for an additional charge. For on-line use, our fc75p 3/4 inch in-line fitting may be ordered to provide for mounting into 3/4 inch fnpt threaded tees.
Do1200 laboratory dissolved oxygen sensor specifications
Range: 0-20 mg/l
Body material: epoxy and noryl
Max temperature: 50 degrees c
Saturation output:
Hdpe = 47mv +/- 9mv,
Ptfe = 33mv+/-9mv
Pressure: 0-100 psig (7.5 bar)
Calibration: single point in air
Response time: after equilibration, hdpe 1 minute for 2mv, ptfe 2 minutes for 2mv
PCFS-IR2125A level sensor contact type, it is used for tube. The principle is infrared, output signal is analog. When there is no water, the sensor outputs low voltage value; When there is water, the sensor outputs a high voltage signal. The size can be customized. The photoelectric liquid level switch has high precision, low price, high reliability and wide application environment, it is less affected by strong acid, alkali and viscosity. Photoelectric level sensors can be used for higher liquid level accuracy requirements.
vibration sensors for bearings HD-ST-A3-B3
Facing the changes in the energy industry, YOYIK keeps pace with the times, not only focusing on the optimization and upgrading of traditional power generation equipment, but also deeply studying new energy technologies and developing a series of accessories suitable for new energy power generation systems, showing the company's keen insight and forward-looking layout of future energy development trends. While promoting its own development, YOYIK does not forget to fulfill its social responsibilities, is committed to environmentally friendly production, implements energy-saving and emission reduction measures, uses environmentally friendly materials, and reduces environmental pollution.
Yoyik can offer many spare parts for power plants as below:
#DF-vibration sensors for bearings HD-ST-A3-B3-DF
speed sensor JNJVS5300-11
Bolt electric heating rod ZJ-20-19
LVDT Sensor TH-6N-200-15-01
Inverter Power Module HWPM580
thermal resistance WZPK2-325
Steam turbine bolt electric heating rod ZJ-22(T)(R)
Anti freezing wind direction sensor YH9120-CMM
Temperature Transmitter JM-B-T010-562D2
Eddy Current Sensor PR6426/000-000
Eddy Current Sensor PR6424/100-140
Display Unit 71386715
PRESSURE SWITCH BH-013044-013
board ME8.530.014 V2_0
Operation Board GP
coil tachometer WZ-1D
LVDT Sensor TD-1G-0200-15-01
Dual input series control power supply PSMC2-7-5-220V/240W
Shaft Displacement Transmitter JX5111-02-50
lvit sensor TD-1100S
Embedded controller HSDS-30/Q
Reluctance speed probe SZCB-01-00-060-05
Bolt electric heating rod ZJ-17-1A
Axial Displacement Sensor WT0112-A90-B00-C01
LVDT transmitter XCBSQ-04/300-02-02
Bolt electric heating rod ZJ-14.5-180
Sensor DF312580-50-06-00
CONTACTOR LG SMC20P
thermocouple C03A2-KY-2B/S1B
Eddy current speed sensor 143.35.19
Trigger Board BSC6M-1
Differential pressure sensor RC861CZ089HYR
CARD MODULE 2SC5010-9CE10-3AA4-Z
Turbine Speed Monitor MSC-2B
Magnetoelectric speed sensor CS-1(D-065-05-1)
Alarm Horn BC-8
Speed Sensor SZCB-02-B117-C01
vibration sensors for bearings HD-ST-A3-B3
China supplier Sensor D-100-02-01 for Kothagudem power
Deyang YOYIK is a strong technical force, first-class product quality, brand reputable large-scale mechanical and electrical equipment Limited. Company products covered a wide range of products sold worldwide, a number of users trust. Acting foreign first-class brand, EATON VICKERS, star, and so on products. Guarantee genuine, the spot sale.
Yoyik can offer many spare parts for power plants as below:
Agecho ultrasonic sensors salient features:
Agecho ultrasonic sensors are available with output options such as analog current 4-20ma analogue voltage 0-5v on/off signal trigger output for multi-sensor application pulse width serial ttl serial rs 232c.
Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available.
Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band).
Agecho accuracy is 1% of the full scale.
Agecho operating voltage 12v dc with reverse polarity protection.(24v dc optional)
Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module.
Agecho is very easy to install rugged design for use in dusty and humid conditions suitable for outdoor as well as indoor use.
Agecho very useful for non-contact distance/level measurement. The distance of the target is measured not just its presence but gives directly 4-20ma serial or pulse width data proportional to the distance of the target.
Agecho operating temperature 0 to 65 degree celsius.
Agecho temperature compensated measurement for better accuracy (optional).
Agecho unaffected by ambient light object color or any other optical characteristic. Works with hard materials like metal sheet plywood or soft materials like cloth and paper rubber etc.
14643 O2 A3 Oxygen Sensor (O2 Sensor) Suppliers
Short on time? Let O2 A3 Oxygen Sensor (O2 Sensor) sellers contact you.
