Find Verified Motor Stator And Rotor Segment Lamination Suppliers, Manufacturers and Wholesalers

V9-V10 Borewell Submersible Pumpset

Falcon Dlx. 250 mm ( 9 & 10) Borewell Submersible Pumpsets are powered by water filled, rewindable submersibleMotor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressureand rigidly locked in stainless steel stator shell. T-Bolt design in all motor ensures rigid construction.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow MRS series 27Mtr head per stage in radial flow series.
- FG 250 Cast Iron Bowl with CED Catted and SS-304 Grade Impeller in Mix flow FMC Series 22Mtr head per stage in
Mix flow series.
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set.
- Dynamically balanced rotating parts ensures minimum vibration and longer life.
- Designed for wide voltage fluctuations.
- Motor portion covered with corrosive resistance Stainless steel (SS 304) shell.
- More durability and hygiene & High operating efficiency.
- Specially designed thrust bearing to withstand high axial thrust load.
- Extremely hardwearing water lubricated bearing.
- Thread type motor construction ensures service feasibility.
- Designed for wide voltage operation.
- Best alternative for JET & Compressor pump set.
- Additional intermediate bearing in higher stage pumps.

Specification
- Power Range : 55 kW to 112 kW (75 HP to 150HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2900 RPM
- Head Range : 12 mtr. To 300 mtr.
- Discharge Range : 3600 LPM to 960 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Maximum Starts Per Hour : 10 Times

Magnetic rotor of permanent magnet motor
1.355-1000 permanent magnet moto stator iron core
2. Grade: 50w470, 50w400, 50w350, 50w310
3. Frame size: 355-1000
4. Type: electrical steel stator lamitations
5. Certification: iso9001, ce
Material
Cold rolled non-oriented silicon steel
Supplier
Wisco, bao steel , shougang group, tisco
Standard
Din gb iso jis
Process
Cutting - blanking - punching - stacking- welding / aluminum die-casting
Capacity
8000 tons monthly
Range
Φ 590mm -- î¦ 3000mm
Stacked length
Max 1100mm

V5 Borewell Submersible Pumpset
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are
assembled under pressure and rigidly locked in stainless steel stators shell.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series)
- 9 Mtr. Head Per Stage In Radial Flow Series.
- Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads.
- Dynamically balanced roating parts ensure minimum vibration and longer life
- Motor Portion covered with corrosion resistant S.S. J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS pumps are available in (GRS - Series)

Specification
- Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply
(Single Phase available in 3 HP to 5 HP)
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 640 Mtr.
- Discharge Range : 690 LPM to 80 LPM
- Outlet Size in Inch : 1.5 , 2.0" & 2.5"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2
kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star
Delta (SD) upto 9.3 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series)
- 9 Mtr. Head Per Stage In Radial Flow Series.
- Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial
thrust loads.
- Dynamically balanced roating parts ensure minimum vibration and longer life
- Motor Portion covered with corrosion resistant S.S. J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS pumps are available in (GRS - Series)

Specification -
- Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply
(Single Phase available in 3 HP to 5 HP)
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 640 Mtr.
- Discharge Range : 690 LPM to 80 LPM
- Outlet Size in Inch : 1.5, 2.0" & 2.5"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW â?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2
kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star
Delta (SD) upto 9.3 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m²/sec (max.)
- Ph Value : 6.5 to 8.5

V6 Borewell Submersible Pumpset
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade

Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.)
6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade

Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

Hardware stamping tool,for ceiling fan,air condition,wash machine etc motor core,have high precision,high speed.


Wooden Box

Details of HOT SALE MOTOR STATOR AND ROTOR FOR HAIR DRIER

Materials: carbon steel,  SECC, silicone steel, aluminum(according to your needs)
Quality standard: ISO9001:2008.
Nearby port: Shekou (Shenzhen, China)
Shipment: Your goods will be shipped in 35 days after payment.
Package: We usually use wooden cases for packing; your own special requirements are available.
 
Production Manufacturing Services
Once your prototype achieves functionality, efficiency and quality, our manufacturing centers can quickly and cost effectively scale-up production to high-volume runs. We will help you determine the best manufacturing process available for your project, and assist in tailoring a customized manufacturing solution using our Lamination Stamping manufacturing method.

 If you need us to open mould, quote, design the motor, or need our cap m aking machine please send us the drawing or the sample, and tell us which material you would like us to use.Welcome to check our price and technology.

more information : www.szjiarun.com

Details of NEW & TOP QUALITY rotor and stator for DC motor

auto interlock stack lamination

Materials: carbon steel,  SECC, silicone steel(according to your needs)
Quality standard: ISO9001:2008.
Nearby port: Shekou (Shenzhen, China)
Shipment: Your goods will be shipped in 35 days after payment.
Package: We usually use wooden cases for packing; your own special requirements are available.
 
 If you need us to open mould, quote, design the motor, or need our cap making machine please send us the drawing or the sample, and tell us which material you would like us to use.Welcome to check our price and technology.

About stamping Die for Motor Rotor and Stator, new punching machine


Service life:150,000,000
Stroke speed: 250~350/min
Materials: carbon steel, SECC, silicone steel, aluminum(according to your needs)
Quality standard: ISO9001:2008
Nearby port: Shekou (Shenzhen, China)
Shipment: Your goods will be shipped in 35 days after payment.
Package: We usually use wooden cases for packing; your own special requirements are available.
 

  If you need us to open mould, quote, design the motor, or need our cap making machine please send us the drawing or the sample, and tell us which material you would like us to use.Welcome to check our price and technology.

more information : www.szjiarun.com

Product name
Silicon steel stator and rotor lamination for motor and generator
Material
Cold rolled non-oriented silicon steel
Supplier
Wisco, bao steel , shougang group, tisco
Process
Heat treatment, annealing and turning surface
Standard
Din gb iso jis
Range
Customized
Stacked length
Max 1100mm
Service
Oem&odm
Packing
Pp + solid sea-worthy carton with special process of antirust
Delivery time
10 days if existing compound tools are available/50 days if we need to making tools

X-TEAM  brushless motors have precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts. With X-team rc motors you can be assured that quality and performance has not been compromised and that these motors represent outstanding value.

Instructions:Place of Origin: Dongguan    Brand: X-TEAM  Package: 1 piece Item Model :1708     Delivery (Lead Time): 4 days after payment     Material : Aluminum alloyProduct Type :Brushless DC Motor    3C rated voltage range:  DC below 36VProduct Certification : CE& FCC &ROHS   Production Capacity:10000 pieces /per month

Features:1. Hand-wound for maximum copper fill.2.Precision-balanced rotor will boost the efficiency and power performance of the motor.3.Nickel-plated neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

X-TEAM  brushless motors have precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts. With X-team rc motors you can be assured that quality and performance has not been compromised and that these motors represent outstanding value.

Instructions:Place of Origin: Dongguan    Brand: X-TEAM  Package: 1 piece   Rated power :400 (W)Item Model :2220     Delivery (Lead Time): 4 days after payment    Rated Voltage :11.1(V) Material : Aluminum alloyProduct Type :Brushless DC Motor    3C rated voltage range:  DC below 36VProduct Certification : CE& FCC &ROHS   Production Capacity:10000 pieces /per month

Features:1. Hand-wound for maximum copper fill.2.Precision-balanced rotor will boost the efficiency and power performance of the motor.3.Nickel-plated neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

X-TEAM  brushless motors have precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts. With X-team rc motors you can be assured that quality and performance has not been compromised and that these motors represent outstanding value.

Instructions:Place of Origin: Dongguan    Brand: X-TEAM  Package: 1 piece   Rated power :360 (W)Item Model :3007    Delivery (Lead Time): 4 days after payment      Material : Aluminum alloyProduct Type :Brushless DC Motor    3C rated voltage range:  DC below 36VProduct Certification : CE& FCC &ROHS   Production Capacity:10000 pieces /per month

Features:1. Hand-wound for maximum copper fill.2.Precision-balanced rotor will boost the efficiency and power performance of the motor.3.Nickel-plated neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Product Name
electric motor stacking stator laminated iron core
Material
cold rolled non-oriented silicon steel
Supplier
WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO
Process
Heat treatment, Annealing and Turning Surface
Standard
DIN GB ISO JIS
Range
Φ 100mm -- Φ 590mm
Stacked length
Max 1100mm
Service
OEM&ODM
Packing
PP + Solid Sea-worthy Carton with special process of antirust
Delivery Time
10 Days if existing compound tools are available/50 Days if we need to making tools

Product Name
high voltage motor stator and rotor core laminated silicon steel
Material
cold rolled non-oriented silicon steel
Supplier
WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO
Process
Heat treatment, Annealing and Turning Surface
Standard
DIN GB ISO JIS
Range
Φ 100mm -- Φ 590mm
Stacked length
Max 1100mm
Service
OEM&ODM
Packing
PP + Solid Sea-worthy Carton with special process of antirust
Delivery Time
10 Days if existing compound tools are available/50 Days if we need to making tools

Product Name
80-355 IE4 super preminum efficiency motor stator and rotor core
Material
cold rolled non-oriented silicon steel
Supplier
WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO
Process
Heat treatment, Annealing and Turning Surface
Standard
DIN GB ISO JIS
Range
Φ 100mm -- Φ 590mm
Stacked length
Max 1100mm
Service
OEM&ODM
Packing
PP + Solid Sea-worthy Carton with special process of antirust
Delivery Time
10 Days if existing compound tools are available/50 Days if we need to making tools