LID / LeTID mitigation
Up to 50% lower degradation
Utility grade
Guaranteed compatibility
Improved shade tolerance
Built to withstand real-world conditions.
Rated for heavy snow loads up to 5400 Pa and
wind loads up to 2400 Pa
Advanced manufacturing technology minimizes
chances of micro-cracks resulting from impact or heat.
Power Warranty - Guaranteed power
98% for 1st year
< 0.5%/yr. to year 25
Enhanced coverage on materials and workmanship
984 Modbus To Profibus Dp Built In Module Suppliers
Short on time? Let Modbus To Profibus Dp Built In Module sellers contact you.
compatible with various discs such as DVD,VCD,SVCD,CD,MP4,MP3,CD-R/W,DVD-R/RW,etc
with USB port and Card Reader
Full-system TV reception (PAL/NTSC/SECAM:D/K.I.B/G.M)
4.3-inch 16:9 TFT color LCD screen with auto slip panel,the
machine gives an excellent visual effect,as well as vivid
bright colors.(Display Format:960*234*3R.G.B dot)
Can connect to 6/10 CD or DVD changer.
Multi-function infrared remote control ,whole instruction type setting.
The electronic music EQ,available tocut over:Classical music(Class),POP,music(PoP),Rock music(Rock),etc.sound field modws.
Big power 4 tarck audio output port:60W*4 channels,driving speaker.
large screen colorful LCD function,the time display screen is sharp,gorgeous and motive.
The AM/FM tuning is provided with manual of auto tuning and saving.
*USB port compatible, Can be connected with IPOD
*TV module built-in with high sensitivity TV tuner
*Bluetooth function ,can be dial-up by touch screen
**built -in GPS(optional)+85USD
A pure sinewave inverter (HUPS) is the combination of two innovative technologies - eliminating the need for separate Power Backup systems for sophisticated home appliances, computers, LED televisions, music systems, and all other electronic devices. Home UPS systems are equipped with Advanced DSP Technology to monitor and control hardware modules in real-time. Power loss can be detected automatically through this intelligence.
Home UPS system and the system switches to backup mode to provide pure sine wave output that is 100% clean, regulated, totally stable, distortion-free and is totally safe to use with sensitive appliances.
A built-in AC MCB provides input mains protection, and the system charges the battery in three stages: boost, absorption, and float for optimum charging. Special features are zero Switch Over Time in UPS mode, ABS Automatic Bypass System, 20KHzfrequency design that ensures Tranquillity, and A high crest factor of 3:1 enables to run of loads that require a high starting current, and compliance with Global standards.
A pure sinewave inverter (HUPS) is the combination of two innovative technologies - eliminating the need for separate Power Backup systems for sophisticated home appliances, computers, LED televisions, music systems, and all other electronic devices. Home UPS systems are equipped with Advanced DSP Technology to monitor and control hardware modules in real-time.Power loss can be detected automatically through this intelligent. HomeUPS system and the system switches to backup mode to provide pure
sine wave output that is 100% clean, and regulated, totally stable,distortion-free, and is totally safe to use with sensitive appliances.A built-in AC MCB provides input mains protection, and the system charges the battery in three stages: boost, absorption, and float for optimum charging.Special features areZero Switch Over Timein UPS mode, ABS Automatic Bypass System, 20KHzfrequency design ensures noiseless operation, A high crest factor of 3:1 enables to run loads that require a high starting current, and compliance Global standards
Simatic dp, terminal module tm-p15c23-a0 for et 200s for power modules 15mm wide, spring-load terminals (cage clamp), 2x3 terminal connections with terminal lead to aux1, aux1 interrupted
Introduction:
Cp5512 is the isolated profibus/mpi/ppi/fwl communication card specially for laptop, use icoupler isolators eliminate optocoupler limitations instead of photoelectric isolation, with small dimension, wide temperature range, and have anti-lightning and surging protective circuit and overcurrent protection with restoration function on the rs485 interface, all use industrial ic in order to apply to wider temperature range, is used to achieve profibus/mpi/ppi/fwl communication connection between laptop and simatic.
Cp5512 insert laptop pcmcia slot from outside. Its function and features is the same as siemens original cp5512(siemens part nr 6gk1551-2aa00 ), and have the following new characters.
Technical specification:
Transmission rate: 9.6kbps12mbps, the corresponding largest communication distance accord with profibus standard.
Interface:connect profibus/mpi/ppi, isolated 9 pin sub-d connector.
Isolated voltage:1000vdc
Interface protection:have anti-lightning and surging protection(ipp=100a 10/700us, 4kv) on the rs485 interface.Itu-tk20/21, vde 0433 standard. 15kv esd protection. Overcurrent protection with restoration function£ºrs485 port can withstand up to 60v voltage caused by continuous over-current.
Support hardware of cp5512:
different from pc adapter and pc adapter usb, cp5512 supports much more hardwares, such as siemens s7-200/300/400plc, ppi/mpi/profibus interface of touch panel, em277, et20 and other hardwares with profibus/mpi/ppi/fwl interface.
It need profibus cable or mpi cable(siemens part nr 6es7 901-0bf00-0aa0) when cp5512 communicates with fieldbus devices.
Usb/ppi+ programming cable simulates usb port as traditional serial port (usually com3), which enables existing programming software(step 7-microwin) to communicate through simulated traditional port and plc devices.
The working power supply of this cable is from the usb port and plc programming interface. The two-color led on the converter box indicates datas transceiving status.
Usb/ppi+ is optoelectronic isolated, suitable for siemens s7-200 series plc, especially for the strong interfere and easily damaged communication interface industry scene.The safeguard in the circuit guarantees the safely running of the system.
Functions
Support windows2000/windows xp
Support step7 micro/win v3.2 and higher
Fully compatible with usb v1.1 and usb cdc v1.1
Power supply by usb bus and plc programming port.
Baud rate: 300 bps ~ 1mbps automatically adapt to the standard baud rate.
Support uart data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
Support long distance communication up to 2000m(9600 bps).
Working temperature -20~+75'c
Length 3 meters.Color:black
One pc supports one usb programming cable only
System requirement
Please make sure your pc is ibm pc compatible and has the following system requirements before using the usb programming cable.
Intel is compatible with 586dx4-100mhz cpu or higher
A standard usb port (4-pin a plug)
Operating system is windows2000 or windows xp
Simatic dp, bus connector for profibus up to 12 mbit/s 90 degree angle outgoing cable, 15, 8 x 64 x 35, 6 mm (wxhxd), terminat. Resist. With isolat. Function, without pg socket
Can electric limited has large stock and big advantages in supplying 6av6642-0ba01-1ax1
Pls contact us immediately if you need it.
Mr. Allen
Tel: 0086-20- 3835 7063
Skype:can-alllen1
Homepage: http://www.Can-electric.Com
Can electric limited (www.Can-electric.Com)
Is one of the largest distributor of plc, hmi, frequency inverter, converter, servo motor, touch screen, soft starter, drive, software, cable of brands
Allen bradley, siemens, delta, mitsubishi, omron, schneider.
Universal input pid process controller
With smart i/o module system
- 4 digits process (pv) and
4 digits process set (sv) display
- universal process input
(tc, rtd, mvz , vz , maz)
- optional secondary sensor input
- dual or multi point calibration
For zvoltage / current input
- configurable on/off, p, pi, pd and
Pid control forms
- adaptation of pid coefficients to the system
With auto-tune and self-tune
- manual/automatic mode selection
For control outputs
- bumpless transfer
- smart i/o module system
- programmable heating, cooling and
Alarm functions for control outputs
- motorized valve control function
- 8 steps profile control ( ramp & soak ) function
And start-hold-stop by using logic input module
- remote set point function by using analogue input modules
- retransmission of process value or process control
By using 0/4...20 maz current output module
- detection of heater failure by using 0...5a vct input . Module
- hardware configuration by using input/output modules
- rs-232 (standard) or rs-485 (optional) serial communication with modbus rtu protocol
Application fields applications
Glass motorized valve control
Plastic profile control
Petro-chemistry pid process control
Textile heater failure detection
Automative
Machine production industries
1.Lamp head built-in:solar panel+li battery+light control sensor+infrared(pir) sensor
2.Eensor control principle:
Daytime:ight control automatic operate solar panel charge for li battery, light bright close
Night: light control automatic operate solar charge close, light bright in save mode(<2w). When man near 8-10m , infrared sensor control operate light bright at full power when man left, the light will work at save mode again after 30 seconds.
Size:540*320*55mm to 1170*330*140mm
Weight: 5.8kg-17kg
Platform 300 is built on high performance hardware with 1gbps throughput. It is installed with quad-port fiber module or quad-port copper module, platform 300 brings carrier-class qos features and reliability for middle-sized isp networks.
Solution platform with a fully integrated range of functions
• comprehensive bandwidth management
• subscriber management (provision flexible qos policy rules with ease, monitor and report on subscriber traffic)
• flexible and open system (comprehensive soap-based api)
• visibility of network performance (dpi analysis and layer 7 reporting)
• manageability (centralized management, redundancy and failover)
Model: JMY680H
1.Product introduction
JMY680H is a RFID read/write module with an UART/IIC/RS232C serial port. The module has various functions and supports the ISO/IEC14443A&B and ISO15693 and ISO7816 contactless cards. Users operate the module via simple command. The module embedded with SAM slot that operate contact smart card according to ISO7816. The module builds in antenna.
2.Characteristics
PCD model:NXP CL RC632
Working frequency: 13.56MHz
Card supported:Mifare 1K/4K, FM11RF08, Ultra Light, DesFire, Mifare ProX, SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, T=CL smart cards(both ISO14443A & ISO14443B) , TI TagIt, I.Code SLI, ST LRI and other tags according to ISO15693 and ISO7816 SAM cards (both T=0&T=1)
Anti collision ability:Full function anti collision; be able to process multi-cards; be able to set operate single card only
Auto detecting card:Supported, default OFF
SAM slot:1 slot
SAM baud rate:9600bps/38400bps
ISO7816 PPSS set:supported
EEPROM:512 Bytes
Power supply:DC 5V
Interface:IIC/UART/RS232C (select when place order)
Communication rate:IIC:400Kbps
UART: 19.2Kbps/115.2Kbps
Max. command length:254 Bytes
Interface level:UART/IIC: 3.3V (TTL level; 5V tolerance)
Power consumption: 150mA
Operating distance:150mm (depending on card)
Dimension:70mm*50mm*16.5mm
Weight:About 120g
ISP:Supported
Operating temperature: -77 ~ +185¡ãF
Storage temperature: -104 ~ +257¡ãF
RoHS:Supported
3.Protocol
There are UART, IIC or RS232C three optional types of interfaces between the host and module. IIC has the advantage of high communication rate and convenient operation. RS232C has long operation distance. Users select the interface according to the special system.
4.Automatic detecting card
The automatic detecting card function supports the ISO14443A and ISO15693. This function supports only one card operation.
Inner package: box (size: 17.5*14*7cm)
Outer package: carton (size: 48*32*24mm)
Weight: 330g
Terms of delivery: dhl, tnt
Delivery time: 5 working days after receive payment.
