Dewatering vibrating screen is specifically designed for mineral screening and dewatering processes, which can realize the separation of different size particles and dehydration to conveyable discharge cake of material at one screen panel and at the same time. Screening and dewatering is a process in which water and materials detached when the material passes through screen surface in a thin layer.
Dewatering vibrating screen is ideal for applications in sand, gravel, aggregate, frac sand, mineral, ore, coal, tailing, clay, etc. The screening mesh is usually 0.16mm, other mesh all can be customized to meet your needs.
Working principle
Two mutually unconnected vibrators that driven by the tape coupling shaft for synchronous reverse operation, and the centrifugal forces generated by the two sets of eccentric mass are superimposed along the component of vibration direction, and reverse centrifugally canceled, thereby forming a single excitation vibration to make the dewatering vibrating screen as a reciprocating linear motion.
The concentrated materials are continuously threw up and down on the screen, and the materials are loosen and crashed to the sieve, the small size materials are filtered away from the sieve holes. Finally it reaches the aim of classifying, dehydrating and desliming.
Features & Benefits
1.Effectively separate several different size particles.
2.Water content of final products as low as 12%-15%.
3.45 angle install increases the screening and dewatering area.
4.High efficiency, large processing capacity and strong vibrating force.
5.Adjustable vibrating frequency to meet different requirements.
6.Torsional shear type high strength bolts are used between side plates and beam.
7.Polyurethane screen with better elasticity and less blocks. The PU side push plates protect the equipment from the rushing material and guard the long life of the whole device.
8.Simple structure and easy operation and maintenance.
Dewatering vibrating screen is specifically designed for mineral screening and dewatering processes, which can realize the separation of different size particles and dehydration to conveyable discharge cake of material at one screen panel and at the same time. Screening and dewatering is a process in which water and materials detached when the material passes through screen surface in a thin layer.
Dewatering vibrating screen is ideal for applications in sand, gravel, aggregate, frac sand, mineral, ore, coal, tailing, clay, etc. The screening mesh is usually 0.16mm, other mesh all can be customized to meet your needs.
Working principle
Two mutually unconnected vibrators that driven by the tape coupling shaft for synchronous reverse operation, and the centrifugal forces generated by the two sets of eccentric mass are superimposed along the component of vibration direction, and reverse centrifugally canceled, thereby forming a single excitation vibration to make the dewatering vibrating screen as a reciprocating linear motion.
The concentrated materials are continuously threw up and down on the screen, and the materials are loosen and crashed to the sieve, the small size materials are filtered away from the sieve holes. Finally it reaches the aim of classifying, dehydrating and desliming.
Features & Benefits
1.Effectively separate several different size particles.
2.Water content of final products as low as 12%-15%.
3.45 angle install increases the screening and dewatering area.
4.High efficiency, large processing capacity and strong vibrating force.
5.Adjustable vibrating frequency to meet different requirements.
6.Torsional shear type high strength bolts are used between side plates and beam.
7.Polyurethane screen with better elasticity and less blocks. The PU side push plates protect the equipment from the rushing material and guard the long life of the whole device.
8.Simple structure and easy operation and maintenance.
Yks serial circular motion vibrating screen is widely applied in material grade operation in coal, mine, metallurgy, chemical and building material industry.
Yks circular motion vibrating screen is designed by combining actual demand of production on the base of absorbing international new technologies and structures. They are:
The screening machine is mainly composed of screen box, vibrator, supporting system and motor.
The screen plate includes pur plate, punched plate, round steel welding plate and stainless welding plate and so on.
Block eccentric-type vibrator can adjust amplitude by adding or reducing weight plate within a certain range.
It adopts flexible coupling and tire coupling in connecting vibrator and motor.
It adopts rubber spring in decreasing vibration.
It adopts tor-shear type high-strength bolt in connecting beams and lateral plates.
It adopts nylon nut locking, etc.
Vibrating Screen
SANYYO screens for scalping, separating and sizing aggregates, minerals and coal come in several different types and a wide range of sizes. We offer screens for both wet and dry applications, and the screening media for optimum end product quality. We also offer both individual units and complete systems, as well as expert advice on choosing the right screen for the job. Our equipment is easily adaptable for stationary and mobile crushing plants. Its main function is to separate different sizes of products. SANYYO vibrating screen has the ability of seperating six different sizes of products in the same time.
Features and values
1) Simple and dependable Eccentric type system.
2) High screening capacity.
3) High durability.
4) No transmission of screen panels.
5) Ready changing of screen plates.
6) Rigid and vibrating resistance screen body.
Vibrating screens operating principle:
In screen grading, the material is separated mechanically on screen plates. Rolling bearings in vibrating screens are stressed by high, mostly shock-type loads. Moreover, the bearings, while rotating about their own axis, perform a circular, elliptical or linear vibrating motion. This results in high radial accelerations which additionally stress the bearings, and especially the cages, considerably. The operating speeds are usually very high. As a result, the bearing temperatures are up to 20 to 30 degrees Kelvin higher than in normal applications. In addition, considerable misalignments between the bearing locations and considerable shaft deflections have to be accommodated.
Vibrating screen
This series of vibrating screen moves round, has multi-layers and is high efficient . The eccentric shaft vibration exciterand partial block help to adjust amplitude . The material drop down the long line . This machine bears the features of different specificaitons , reliability , strong exciter , high effiency , little noise , durability , convenient maintenance and safety . It is widely used for classification in mining , construction material , transportation , energy and so on .
Standard container, nude packing, can pack as the customers' requirements.
Vibration screen is vibrated by the circling motion. The screening line of material is long and has a lot of sieve specification. The screen of every shelf specification is clear, and it adopts the style of the barrel to surge.
It had the characteristics of reliable structure, strong vibrating strength, low noise in vibration, easy maintenance, safety operation and it is widely used in mining, building materials, traffic energy, chemical industry, etc.
Omniscient International, an ISO & CE certified manufacturer, produces Long Life Brush Holders for Industrial Use, engineered for durability and consistent performance in demanding environments. Manufactured from high-quality brass or stainless steel, with a golden or silver metallic finish, these brush holders are designed to maintain stable brush contact, reduce wear, and extend service intervals. They offer excellent resistance to heat, vibration, and corrosion, making them ideal for motors, generators, pumps, and heavy-duty machinery used in industries like manufacturing, mining, and power generation. Available in standard and custom sizes, with options for spring tension and terminal configuration as per OEM requirements.
Specification
Size : as clients
Aperture : 3mm - big
Wire Diameter : according to aperture
Strip Material : Polyurethane or
Strip Width : 1.5cm - big
Strip Thickness : 8mm - big
Strips Quantity : as client's requests
Description
Self-cleaning screens are a non-blinding, high quality screening surface that provides accurate screening and sizing.
Having many advantages over other screen types, self cleaning mesh gives higher production rates while eliminating the problem of Large unwanted flat
material that contaminates the finished product. We also can add some pu strips on the bars, it will be more wearproof to improve the life.
Advantage:
Anti-clogging
Anti-pegging
Increased wear life
Accurate sizing
Available to suit all types of mobile and static screens
With high quality, non-blinding screening surface the Flexi-Harp is the perfect mesh. The combination of different size wire used in manufacture means that
they vibrate at varying frequencies to produce a self-cleaning surface. Due to its flat surface (no knuckles Self-cleaning screens can use a smaller wire diameter
than woven wire for some applications. Separates flakes and slivers from finished product while greatly reducing problems like plugging and blinding.
Specification
Material : polyurethane coated wire rope
Aperture shape :square or rectangular
Aperture range : 2mm to big
Wire rope diameter range : 1.5mm to big
Description
Tufflex is polyurethane coated stainless steel wire rope screen with the same open area as woven wire and huge advantages over traditional screens.
The Tufflex screen is made up of two types of ropes welded together. The rope running from hook to hook is a wire rope with a thick polyurethane covering.
This rope, with the wire, allows the hooked edge screen to be tensioned like other hooked edge screens, with no modifications to machinery required.
The same maintenance procedures of checking the screen tension applies to Tufflex screens. The other rope is made up of a fine synthetic cord, also with thick polyurethane covering, and runs parallel to the hooked edge. For side-tensioned set-ups, this rope acts like rider bars for larger stones to slide down the deck, channelling smaller ones closer to the apertures. This increased stratification improves screening efficiency. With the end-tensioned screens, this rope can be used on top,
running in a cross-flow orientation, or positioned underneath the rope with the wire.
Features
Tufflex is a polyurethane-coated screen media that can be substituted for traditional woven wire screens with minimal adjustment to the screen deck.
Available in several combinations of both rope and wire diameter and aperture size, Tufflex offers additional customisation options via partially or fully welded screen cloths.
The smooth surface of the polyurethane prevents sticking and blinding, which is further enhanced by the flexibility offered by Tufflexs cloth construction.
The Tufflex cloths not only improved the quality but also minimised blinding, improved efficiency and have great wear. this provides the site with longer
periods between changeover and less downtime during busy screening periods.
The available range of Tufflex screens is extensive, with aperture sizes ranging from 1.5mm to 45mm and square and rectangular aperture shapes,
similar to woven wire. The wire rope diameter ranges from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide.
The construction varies with either fully or partially welded wires.Sheets of poly can also be welded on for impact protection or enhanced abrasion
protection along the hooks.
Brief introduction
Double deck dewatering screen for tail slurry materials, is my company new screening equipment, with low energy consumption, the characteristics of large capacity, belong to the domestic same industry leading products.
This series widely used in tailings processing, coal slime dewatering, washed quartz sand and mud dehydration processing link, etc.Suitable for dewatering, medium drainage , spraying, dry and wet classifying for medium and fine material.
Working principle
Double deck dewatering screen adopts dual-motor self-synchronization technology.The motors coordinate with universal eccentric and adjustable amplitude vibrator.When the two motors start to work, the vibrators move reversely at the same time.The centrifugal force is generated by the eccentric blocks superpose themselves and form a single direction vibration. The high frequency vibration drives the screen move back and forth in line repeatedly. So the sand will be dehydrated and filtered.
Feature
1.Choose polyurethane screenas its vibrating screen.
2.Customized sizes.
According to different situation, not only polyurathane screen mesh can be adjustable,
But also its length, width and screen layers can be manufactured for different needs.
3.Simple structure, easliy installation and lower invest.
4.Bending a whole steel plate as its main body, no welding and no leaking.
5.Final sand water content down to 15%, convenient in packing and delivery.
Brief introduction
Personalized portable chassis are designed to to suit specific applications.
Highly portable units are designed for fast setup and take down from site to site.Achieve moisture content as low as 10% for a saleable product in less than a day.Deeper bed depth allows screens to remove more moisture. Aggressive throw allows for higher feed tonnage and faster drying cycles.Urethane screen sidewalls for additional dewatering along the sides of the bed.
Working principle
This special new vibrating screen design is based on our (three layers circle vibrating screen, it is installed a steel base under vibrating screen body with high pressure wheels for moving and column with hole for fixing on cement-based when working. Top feature is that it can be convenient to be moved in certain range of working site, save the project budget. This sand screening machine is best choice for separating the gravel and also suitable for mining, construction material, transportation, etc.
Features
1.High working frequency, heavy vibrating intensity, low moisture of product on the screen, high capacity. When used for tailing dehydration, it can get higher solid recycle.
2.The adoption of auto-synchronization principle, motor drives vibrator by tyre coupling, the structure is simple and the noise is low.
3.Can be easily moved to the new workplace.
In addition to the performance of ordinary dewatering screen, polyurethane dewatering screen is mainly used for tailing dry discharge with thickener, which is the main accessory of dewatering screen and tailing dry discharge equipment.
Polyurethane dewatering screen is a special equipment for coal slime dewatering, which is widely used for the recovery and dewatering of slime and other extremely fine materials.
Polyurethane dehydration screen adopts double electrode self synchronization technology, universal eccentric block and adjustable amplitude vibrator. It is mainly composed of screen box, vibration exciter support system and motor. Two unconnected vibrators are respectively driven by the belt coupling shaft for synchronous reverse operation. The centrifugal force produced by two groups of eccentric mass is superposed along the vibration direction and counteracted by reverse centrifugation, so as to form a single exciting vibration along the vibration direction and make the screen box move in a reciprocating straight line.
Product Name High precision plastic test sieve for laboratory
Type : Vibrating screen
Material : Stainless steel, 304 stainless steel
Weave Style : Plain Weave
Screen material : Wire woven web
Application : Material screening for Aluminum powder, Zinc powder, Vegetable Powder, Food, Medicine and so on.
More detailes please contact
Dewatering vibrating screen is specifically designed for mineral screening and dewatering processes, which can realize the separation of different size particles and dehydration to conveyable discharge cake of material at one screen panel and at the same time. Screening and dewatering is a process in which water and materials detached when the material passes through screen surface in a thin layer.
Dewatering vibrating screen is ideal for applications in sand, gravel, aggregate, frac sand, mineral, ore, coal, tailing, clay, etc. The screening mesh is usually 0.16mm, other mesh all can be customized to meet your needs.
Dewatering screen is widely applied for dewatering, desliming, deintercalation, which can be used to sand and stone washing plant, coal preparation plant, sludge recycling, mineral processing plant, tailings dry discharge and more. So it is also called sand and stone dewatering screen, mine dewatering screen, coal slime dewatering screen, tailings dewatering screen, high frequency dewatering screen.
Base on lower water content sand is well needed and sold in market, we do research and manufacture a series new type dewatering screen. TS dewatering screen is mainly used in mining, construction for coarse or fine sand dehydrate processing.With the advantages of simple structure and easy maintenance, it becomes a hot seller in our market.
Working principle
Dewatering screen adopts dual-motor self-synchronization technology. The motors coordinate with universal eccentric and adjustable amplitude vibrator. When the two motors start to work, the vibrators move reversely at the same time. The centrifugal forces is generated by the eccentric blocks will superpose themselves and form a single direction vibration. The high frequency vibration drives the screen move back and forth in line repeatedly. So the sand can be dehydrated and filtered.
Product Name: 65mn stainless steel self cleaning wire mesh /screen panel for mining
Material:Different steel wires available +polyurethane edge
Aperture Size :0.35mm-50mm
Wire Diameter:1.5mm-6mm
Screen Size:305x305mm, 305x610mm, 610x610mm, 1200x1800mm, etc
Installation: Hook or without hook
Usage:Industrial use like mining, sand, ore, quarry, coal,etc
Selfcleaning Screen Advantages
1 Excellent anti-blockage performance
2 Highly efficient sieving performance
3 Great flip-flow performance
4 30% higher open aera than traditional woven wire meshes
5 Obvious improvement of capacity and output
6 Long life span, 3 times longer wear life than that of traditional woven screen
It is the best replacement of the traditional woven wire mesh , due to its much better performance & good price
Packing & Delivery Details
Packing: 10 pcs into a wooden case (shown as below ) or customized
Delivery time: 7days for regular screens less than 50 pcs; 15 days for OEM screens less than 50pcs; 20-30days for screens over 50 pcs
Our Selfcleaning Screen Service
> OEM/ODM available
> Prompt response to your inquiry
> Professional after-sales team offered
> On-time delivery
> 6-month warranty , within this period from the date of your receipt , in case of any defect , we will make up for the corresponding qtys immediately or in next new shipment after you send us the evidence of defective product images or videos.
Any other questions , kindly contact me for further details any time !!!
Base on lower water content sand is well needed and sold in market, we do research and manufacture a series new type dewatering screen. TS dewatering screen is mainly used in mining, construction for coarse or fine sand dehydrate processing.With the advantages of simple structure and easy maintenance, it becomes a hot seller in our market.
Working principle
Dewatering screen adopts dual-motor self-synchronization technology. The motors coordinate with universal eccentric and adjustable amplitude vibrator. When the two motors start to work, the vibrators move reversely at the same time.
The centrifugal forces is generated by the eccentric blocks will superpose themselves and form a single direction vibration. The high frequency vibration drives the screen move back and forth in line repeatedly. So the sand can be dehydrated and filtered.
Features & Benefits
1. Advanced structure, light weight, high dehydrating ratio with new type vibrating motors.
2. Simple structure, easy maintenance.
3. Cross beam and screen body connect with high strength bolts, no welding and easy to remove and maintenance.
4. Polyurethane screen (PU)panels with high screening ratio, big capacity,long service life and no blocking.
5. Widely used, less replacement parts.
Base on lower water content sand is well needed and sold in market, we do research and manufacture a series new type dewatering screen. TS dewatering screen is mainly used in mining, construction for coarse or fine sand dehydrate processing. With the advantages of simple structure and easy maintenance, it becomes a hot seller in our market.
Working principle
Dewatering screen adopts dual-motor self-synchronization technology. The motors coordinate with universal eccentric and adjustable amplitude vibrator. When the two motors start to work, the vibrators move reversely at the same time.
The centrifugal forces is generated by the eccentric blocks will superpose themselves and form a single direction vibration. The high frequency vibration drives the screen move back and forth in line repeatedly. So the sand can be dehydrated and filtered.
Features & Benefits
1. Advanced structure, light weight, high dehydrating ratio with new type vibrating motors.
2. Simple structure, easy maintenance.
3. Cross beam and screen body connect with high strength bolts, no welding and easy to remove and maintenance.
4.Polyurethane screen(PU)panelswith high screening ratio, big capacity,long service life and no blocking.
5. Widely used, less replacement parts.
Specification
Size : as clients
Aperture : 3mm - big
Wire Diameter : according to aperture
Strip Material : Polyurethane or
Strip Width : 1.5cm - big
Strip Thickness : 8mm - big
Strips Quantity : as client's requests
Description
POLY RIPPLE SCREEN IS PRODUCED BASE ON SELF CLEANING SCREEN MESH IS AVAILABLE IN HIGH TENSILE STEEL MESH OR STAINLESS STEEL,
WITH THE PU STRIPS WHERE ON THE BARS OF DECK.
Self-cleaning screens are a non-blinding, high quality screening surface that provides accurate screening and sizing.
Having many advantages over other screen types, self cleaning mesh gives higher production rates while eliminating the problem of Large
unwanted flat material that contaminates the finished product.
We also can add some pu strips on the bars, it will be more wearproof to improve the life.
Features
Anti-clogging
Anti-pegging
Increased wear life
Accurate sizing
Available to suit all types of mobile and static screens
With high quality, non-blinding screening surface the Flexi-Harp is the perfect mesh. The combination of different size wire used in manufacture means
that they vibrate at varying frequencies to produce a self-cleaning surface. Due to its flat surface (no knuckles Self-cleaning screens can use
a smaller wire diameter than woven wire for some applications.
Separates flakes and slivers from finished product while greatly reducing problems like plugging and blinding.
